| Age | Commit message (Collapse) | Author |
|---|
|
This is mostly a pure refactoring.
Except for the buggy cases when calling erlang:halt() with a positive
integer in the range -(INT_MIN+2) to -INT_MIN that got confused with
ERTS_ABORT_EXIT, ERTS_DUMP_EXIT and ERTS_INTR_EXIT.
Outcome OLD erl_exit(n, ) NEW erts_exit(n, )
------- ------------------- -------------------------------------------
exit(Status) n = -Status <= 0 n = Status >= 0
crashdump+abort n > 0, ignore n n = ERTS_ERROR_EXIT < 0
The outcome of the old ERTS_ABORT_EXIT, ERTS_INTR_EXIT and
ERTS_DUMP_EXIT are the same as before (even though their values have
changed).
|
|
Decoding a term with a large (HAMT) map in an small (FLAT) map could cause
a critical error if the external format was not produced by beam.
|
|
|
|
by adding a dynamic heap factory.
"binary_to_term" is now a hybrid solution with both
a call to decoded_size() to calculate needed heap space
AND possible dynamic allocation of more heap space
if needed for big maps.
The heap size returned from decoded_size() is guaranteed
to be sufficient for all term heap data except for hashmap
nodes. All hashmap nodes are created at the end of dec_term()
by invoking the heap factory interface that may allocate more
heap space on process heap or in fragments.
With this commit it is no longer guaranteed that a message
is confined to only one heap fragment.
|
|
to handle the "start of list" case in one place and not seven.
Note that this commit reverts (47d6fd3ccf35) back to using WSTACK
and pushing raw pointers. We disable GC while yielding, so this should not
be a problem.
|
|
* sverk/hamt-encode-size-bug/OTP-12585:
erts: Fix bug in term_to_binary size estimation for hamt
erts: Optimize term_to_binary size estimation
|
|
|
|
for tuples and maps containing ascii strings (lists).
|
|
|
|
This will also fix a bug in term_to_binary
treating full nodes as tuples and emiting LIST_EXT for leafs.
|
|
Must save hamt_list in context.
|
|
* sverk/dec_term-bin-overhead/OTP-12554:
erts: Add missing binary offheap overhead in binary_to_term
|
|
|
|
Adding ERTS_SWORD_MAX to a pointer does not work
as a way to disable a bound check.
Remove the hp_end from ErtsHeapFactory as it isn't really used anyway.
|
|
flatmap: Small map
hashmap: Large map
map: flatmap or hashmap
|
|
Strategy: Calculate an over estimation of heap size that will give
such a low probability for overflow, that "it will not happen".
Scary assumption 1: Uniformly distributed hash values.
Scary assumption 2: Tree size is normally distributed (right?)
|
|
|
|
with over estimation of heap size.
|
|
|
|
|
|
|
|
Binary offheap overhead is used to trigger GC when a process is
referring "too much" binary offheap data.
Offheap binaries created from external format (binary_to_term,
distributed messages or compacted ets tables) were not accounted for.
Example: A process receiving a lot of binary data in distributed messages,
while not building much terms on its heap, could cause an extensive
memory consumption for garbage binaries.
|
|
Conflicts:
erts/emulator/hipe/hipe_bif0.c
|
|
Bignums are artifically restricted in size. Arithmetic and logical
operations check the sizes of resulting bignums, and turn oversize
results into system_limit exceptions.
However, this check is not performed when bignums are constructed by
binary matching. The consequence is that such matchings can construct
oversize bignums that satisfy is_integer/1 yet don't work. Performing
arithmetic such as Term - 0 fails with a system_limit exception. Worse,
performing a logical operation such as Term band Term results in [].
The latter occurs because the size checking (e.g. in erts_band()) is
a simple ASSERT(is_not_nil(...)) on the result of the bignum operation,
which internally is [] (NIL) in the case of oversize results. However,
ASSERT is a no-op in release builds, so the error goes unnoticed and []
is returned as the result of the band/2.
This patch addresses this by preventing oversize bignums from entering
the VM via binary matching:
- the internal bytes_to_big() procedure is augmented to return NIL for
oversize results, just like big_norm()
- callers of bytes_to_big() are augmented to check for NIL returns and
signal errors in those cases
- erts_bs_get_integer_2() can only fail with badmatch, so that is the
Erlang-level result of oversize bignums from binary matches
- big_SUITE.erl is extended with a test case that fails without this
fix (no error signalled) and passes with it (badmatch occurs)
Credit goes to Nico Kruber for the initial bug report.
|
|
* sverk/yielding-distr-send/OTP-12232:
erts: Add constant TERM_TO_BINARY_MEMCPY_FACTOR
erts: Optimize some repeated calls to {E,W}STACK_PUSH
erts: Yield in term_to_binary when encoding big maps
erts: Remove unnecessary goto for fun encoding
erts: Yield in term_to_binary while copying large binaries
erts: Implement yielding for distributed send of large messages
|
|
and do not piggyback on B2T_MEMCPY_FACTOR
|
|
* sverk/hipe-inline-reserve-trap-frame:
erts: Extend usage of ASM macro to avoid including asm macros in C code
erts: Make hipe_{un}reserve_beam_trap_frame INLINE
|
|
|
|
except the reference counter 'refc', as different callers
have different strategies regarding the lifetime of the binary.
|
|
|
|
|
|
|
|
|
|
Applies also to distributed send.
|
|
Use same mechanism as term_to_binary to yield
while encoding large messages for distributed send.
|
|
Replace the 'erlang:binary_to_term/1' and 'erlang:binary_to_term/2'
Erlang wrappers taking care of failure after yield with management
of this in the hidden yield BIF.
|
|
|
|
to be: 116,Arity, K1,V1,K2,V2,...,Kn,Vn
instead of: 116,Arity, K1,K2,...,Kn, V1,V2,....,Vn
We think this will be better for future internal map structures
like HAMT. Would be bad if we need to iterate twice over HAMT
in term_to_binary, one for keys and one for values.
|
|
* sverk/hipe-disable-gc-bug:
erts: Fix heap overwrite by hipe "trap frames" when GC is disabled
ASSERT that GC is not tried with "need" when GC is disabled
|
|
by trapping BIFs like term_to_binary and binary_to_term.
|
|
This change was triggered by the OSE float printing function
not working exactly the same way as linux/win32. But it is
also a good one in general as it cuts size in more than half
for floats.
|
|
'maps_head' was not restored when yielding. Risk for crash increases with
size and number of maps in term.
|
|
erl_drv_output_term() and erl_drv_send_term() can send messages
containing maps with the use of the new ERL_DRV_MAP.
The driver API minor version is updated as new functionality is added.
|
|
Maps may be encoded with keys in arbitrary order. This is fine,
as long as keys are unique.
|
|
* erlang:term_to_binary/1
* erlang:binary_to_term/1
|
|
|
|
* sverk/term2bin-simplify:
erts: Refactor ESTACK & WSTACK to use a struct easy to "export"
erts: Fix benign ESTACK/WSTACK typo
erts: Fix compiler warnings for NO_JUMP_TABLE
erts: Run binary_SUITE:trapping even for 32bit
erts: Extend binary_SUITE:ttb_trap to also cover binary_to_term
erts: Remove the extra_root feature from the process structure
erts: Simplify term_to_binary by removing saved ESTACK from root set
|
|
This is not a clean refactor. It changes the behaviour slightly
of E/WSTACK_RESTORE. The allocated stack from E/WSTACK_SAVE is used
as-is and not copied into default_stack. This will hopefully fix an
illusive memory leak that valgrind is reporting.
|
|
We disabled GC (in 522a29666088d5) during trapping and don't need to
include the saved ESTACK as part of root set.
|
|
for 32-bit integers (INTEGER_EXT) on 64-bit architectures.
|
