aboutsummaryrefslogtreecommitdiffstats
path: root/erts/emulator/beam/ops.tab
AgeCommit message (Collapse)Author
2017-07-06Introduce new_small_map_lit opMichal Muskala
Take advantage of the fact that small maps have a tuple for keys. When new map is constructed and all keys are literals, we can construct the entire keys tuple as a literal. This should reduce the memory of maps created with literal keys almost by half, since they all can share the same keys tuple.
2017-06-28Reduce C code size for bit syntax instructionsBjörn Gustavsson
Bit syntax instructions never store their result in a Y register. Therefore, change the bit syntax instructions to use 'x' as the destination instead of 'd'. That will simplify the code that stores the result, and will be a slight reduction in code size and execution time.
2017-06-28ops.tab: Use combined operandsBjörn Gustavsson
2017-06-26Eliminate potential unsafe use of general destinationBjörn Gustavsson
a3407eaa2104d6 eliminated the -gen_dest flag for macros in ops.tab. It turns out that the new implementation (taking the address of the X or X destination register) is unsafe if the destination is a Y register and there can be a GC. The problem is that the address to the Y register will change if there is a GC. Fortunately, the few instructions in OTP 20 that have a general destinations are safe. The put_list_ssd instruction never does a GC. The bit syntax instructions that may do a GC will always store the result to an X register. To be completely sure, rewrite the destination register from 'd' to 'x' for the bit syntax instructions. That means that a bit syntax instruction with a Y register destionation will abort the loading if it is encountered.
2017-06-14Update copyright yearHans Nilsson
2017-05-18Allow multiple types per argument for specific instructionsBjörn Gustavsson
Inroduce syntactic sugar so that we can write: get_list xy xy xy instead of: get_list x x x get_list x x y get_list x y x get_list x y y get_list y x x get_list y x y get_list y y x get_list y y y
2017-05-18Eliminate the -gen_dest macro flagBjörn Gustavsson
Instructions that take a 'd' argument needs a -gen_dest flag in their macros. For example: %macro:put_list PutList -pack -gen_dest put_list s s d -gen_dest was needed when x(0) was stored in a register, since it is not possible to take the address of a register. Now that x(0) is stored in memory and we can take the address, we can eliminate gen_dest.
2017-03-24compiler: Add is_tagged_tuple instructionBjörn-Egil Dahlberg
Rewrite the instruction stream on tagged tuple tests. Tagged tuples means a tuple of any arity with an atom as its first element. Typically records, ok-tuples and error-tuples. from: ... {test,is_tuple,Fail,[Src]}. {test,test_arity,Fail,[Src,Sz]}. ... {get_tuple_element,Src,0,Dst}. ... {test,is_eq_exact,Fail,[Dst,Atom]}. ... to: ... {test,is_tagged_tuple,Fail,[Src,Sz,Atom]}. ...
2017-01-12Perform potentially long GC on dirty schedulers if availableRickard Green
2016-09-06Merge branch 'kvakvs/erts/gc_minor_option/OTP-11695'Lukas Larsson
* kvakvs/erts/gc_minor_option/OTP-11695: erts: Fix req_system_task gc typespec Fix process_SUITE system_task_blast and no_priority_inversion2 Option to erlang:garbage_collect to request minor (generational) GC Conflicts: erts/emulator/beam/erl_process.c erts/preloaded/src/erts_internal.erl
2016-08-31Remove old purge strategyRickard Green
2016-08-12Option to erlang:garbage_collect to request minor (generational) GCDmytro Lytovchenko
Note: Minor GC option is a hint, and GC may still decide to run fullsweep. Test case for major and minor gc on self Test case for major and minor gs on some other process + async gc test check docs fix
2016-04-18Merge branch 'bjorn/compiler/misc-opt'Björn Gustavsson
* bjorn/compiler/misc-opt: v3_kernel: Construct literal lists properly Use the register map in %live in beam_utils:is_killed_block/2 Teach beam_utils to check liveness for put_map instructions beam_peep: Help out beam_jump
2016-04-18Merge branch 'bjorn/erts/beam_load'Björn Gustavsson
* bjorn/erts/beam_load: Optimize get_tuple_element instructions that target Y registers Mend beam_SUITE:packed_registers/1 Correct unpacking of 3 operands on 32-bit archictectures Eliminate misleading #ifdef ARCH_64 in beam_opcodes.h beam_debug: Correct masking when unpacking packed operands
2016-04-14v3_kernel: Construct literal lists properlyBjörn Gustavsson
Use cerl:make_list/1 instead of a home-made make_list/1 to ensure that literal lists are constructed as literals. In a future release, we would like to forbid in the loader construction of literal lists using instructions like: put_list {atom,a} [] Dst The proper way is: move {literal,[a]} {x,0} Also update the comment about "put_list Const [] Dst" in ops.tab.
2016-04-14Optimize get_tuple_element instructions that target Y registersBjörn Gustavsson
Several improvements in the compiler (e.g. c288ab87fd6) has lead to an Y register being the target for get_tuple_element instructions. Therefore, introduce i_get_tuple_element2y that combines two consecutive get_tuple_element instructions that target Y registers.
2016-04-13Merge branch 'henrik/update-copyrightyear'Henrik Nord
* henrik/update-copyrightyear: update copyright-year
2016-04-08Simplify the raise instruction to reduce code sizeBjörn Gustavsson
The raise/2 instruction is almost always used like this: raise x(2) x(1) Therefore, we can translate it to an internal i_raise/0 instruction that uses x(2) x(1) as its implicit operands. We will also remove the backward compatibility with R10-0. It is unlikely that anyone still is using BEAM files compiled with the R10-0 compiler, especially since most of those modules cannot be loaded. The loader will refuse to load any module that uses the old non-GCIng arithmetic instructions or the non-GCing versions of length/1 or size/1. Doing these changes will reduce both the size of the loaded BEAM code and size of the code in process_main().
2016-04-07Eliminate unnecessary renaming of bs_put_utf16/3Björn Gustavsson
There is no reason to rename bs_put_utf16/3. (We rename instructions if we'll need to change the operands or if we will need to avoid an endless transformation loop. Neither of these reasons apply to bs_put_utf16/3.)
2016-04-07Don't let the loader do the compiler's jobBjörn Gustavsson
Optimizations that are possible to do by the compiler should be done by the compiler and not by the loader. If the compiler has done its job correctly, attempting to do the two transformations only wastes time.
2016-04-06ops.tab: Remove useless transformationBjörn Gustavsson
The transformation on the following line will do the job.
2016-03-31Fix unsafe transformation of apply/3 with fixed argumentsBjörn Gustavsson
62473daf introduced an unsafe optimization in the loader. See the comments in the test case for an explanation of the problem.
2016-03-15update copyright-yearHenrik Nord
2016-02-02erts, kernel: Add os:perf_counter functionLukas Larsson
The perf_counter is a very very cheap and high resolution timer that can be used to timestamp system events. It does not have monoticity guarantees, but should on most OS's expose a monotonous time. A special instruction has been created for this counter to further speed up fetching it. OTP-12908
2015-12-09Merge branch 'egil/pd-opt-get/OTP-13167'Björn-Egil Dahlberg
* egil/pd-opt-get/OTP-13167: erts: Add i_get_hash instruction erts: Use internal hash for process dictionaries
2015-12-07erts: Add i_get_hash instructionBjörn-Egil Dahlberg
Calculate hashvalue in load-time for constant process dictionary gets.
2015-07-06Speed up list matchingBjörn Gustavsson
The combination is_non_empty_list followed by get_list is extremly common (but not in estone_SUITE, which is why it has not been noticed before). Therefore it is worthwile to introduce a combined instruction.
2015-07-06Eliminate prefetch for conditional instructionsBjörn Gustavsson
Not pre-fetching in conditional instructions (instructions that use -fail_action) seems to improve performance slightly. The reason for that is that conditional instructions may jump to the failure label, wasting the pre-fetched instruction. Another reason is that that many conditional instructions do a function call, and the register pressure is therefore high. Avoiding the pre-fetch may reduce the register pressure and pontentially result in more efficient code.
2015-07-03Teach beam_makeops to pack operands for move3 and move_windowBjörn Gustavsson
It is currently only possible to pack up to 4 operands. However, the move_window4 instrucion has 5 operands and move_window5 and move3 instrucations have 6 operands. Teach beam_makeops to pack instructions with 5 or 6 operands. Also rewrite the move_window instructions in beam_emu.c to macros to allow their operands to get packed.
2015-07-03Ensure that the move_call_ext_{last,only} instructions are usedBjörn Gustavsson
Update transformations to ensure that the move_call_ext_last and move_call_ext_last are used.
2015-07-03Introduce swap_temp/3 and swap/2Björn Gustavsson
Sequences of three move instructionst that effectively swap the contents of two registers are fairly common. We can replace them with a swap_temp/3 instruction. The third operand is the temporary register to be used for swapping, since the temporary register may actually be used. If swap_temp/3 instruction is followed by a call, the temporary register will often (but not always) be killed by the call. If it is killed, we can replace the swap_temp/3 instruction with a slightly cheaper swap/2 instruction.
2015-07-03Introduce specialized versions of move2Björn Gustavsson
Currently, move2/2 does the two moves sequentially to ensure that the instruction will always work correctly. We can do better than that. If the two move instructions have any registers in common, we can introduce simpler and slightly more efficient instructions to handle those cases: move_shift/3 move_dup/3 For the remaining cases when the the move instructions have no common registers, the move2/4 instruction can perform the moves in parallel which is probably slightly more efficient. For clarity's sake, we will remain the instruction to move2_par/4.
2015-07-03Add back frequently used x(0) instructionsBjörn Gustavsson
2015-07-03Remove the last use of tmp_arg1Björn Gustavsson
2015-07-03Remove the i_fetch instructionBjörn Gustavsson
2015-07-03Eliminate use of i_fetch for bit syntax instructionsBjörn Gustavsson
2015-07-03Eliminate the use of i_fetch for BIF instructionsBjörn Gustavsson
2015-07-03Eliminate the use of i_fetch for relational operatorsBjörn Gustavsson
2015-07-03Eliminate the use of i_fetch in arithmetic instructionsBjörn Gustavsson
The i_fetch instruction fetches two operands and places them in the tmp_arg1 and tmp_arg2 variables. The next instruction (such as i_plus) does not have to handle different types of operands, but can get get them simply from the tmp_arg* variables. Thus, i_fetch was introduced as a way to temper a potentail combinatorial explosion. Unfortunately, clang will generate terrible code because of the tmp_arg1 and tmp_arg2 variables being live across multiple instructions. Note that Clang has no way to predict the control flow from one instruction to another. Clang must assume that any instruction can jump to any other instruction. Somehow GCC manages to cope with this situation much better. Therefore, to improve the quality of the code generated by clang, we must eliminate all uses of the tmp_arg1 and tmp_arg2 variables. This commit eliminates the use of i_fetch in combination with the arithmetic and logical instructions. While we are touching the code for the bsr and bsl instructions, also move the tmp_big[] array from top scope of process main into the block that encloses the bsr and bsl instructions.
2015-07-03Make the 'r' operand type optionalBjörn Gustavsson
The 'r' type is now mandatory. That means in order to handle both of the following instructions: move x(0) y(7) move x(1) y(7) we would need to define two specific operations in ops.tab: move r y move x y We want to make 'r' operands optional. That is, if we have only this specific instruction: move x y it will match both of the following instructions: move x(0) y(7) move x(1) y(7) Make 'r' optional allows us to save code space when we don't want to make handling of x(0) a special case, but we can still use 'r' to optimize commonly used instructions.
2015-07-03Allow X and Y registers to be overloaded with any literalBjörn Gustavsson
Consider the try_case_end instruction: try_case_end s The 's' operand type means that the operand can either be a literal of one of the types atom, integer, or empty list, or a register. That worked well before R12. In R12 additional types of literals where introduced. Because of way the overloading was done, an 's' operand cannot handle the new types of literals. Therefore, code such as the following is necessary in ops.tab to avoid giving an 's' operand a literal: try_case_end Literal=q => move Literal x | try_case_end x While this work, it is error-prone in that it is easy to forget to add that kind of rule. It would also be complicated in case we wanted to introduce a new kind of addition operator such as: i_plus jssd Since there are two 's' operands, two scratch registers and two 'move' instructions would be needed. Therefore, we'll need to find a smarter way to find tag register operands. We will overload the pid and port tags for X and Y register, respectively. That works because pids and port are immediate values (fit in one word), and there are no literals for pids and ports.
2015-06-18Change license text to APLv2Bruce Yinhe
2015-04-27erts: Specialize minus and plus instructionBjörn-Egil Dahlberg
Seen on SSL application where substraction with x registers were prevalent: * i_minus specialization on x registers * i_plus specialization on x registers
2015-04-27erts: Add move2 specialization for common move patternsBjörn-Egil Dahlberg
Common pattern seen in SSL: move y x | move r x -> move2 move r x | move y x -> move2 Common pattern seen in SSL and Compiler: move x r | move x x -> move2
2015-04-24erts: Specialize rem instruction for common caseBjörn-Egil Dahlberg
* i_rem specialization on x registers
2015-04-24erts: Specialize band instruction for common caseBjörn-Egil Dahlberg
* i_band specialization on x registers and constants
2015-04-23erts: Add move window instructionBjörn-Egil Dahlberg
Move an entire region of x registers to the stack. This reduces the dispatch pressure of move instructions. Also introduce a move2 specialization for some common move patterns: move r y | move x y -> move2 : As above, moving regions to the stack move x r | move x y -> move2 : A seemingly common pattern
2015-04-23erts: Add instruction move3 for xy and xxBjörn-Egil Dahlberg
2015-04-23erts: Specialize compare instructionsBjörn-Egil Dahlberg
* i_is_lt for r, x registers and constants * i_is_ge for x registers and constants * i_is_exact_eq for r and x registers
2015-04-13Pre-compute hash values for the general get_map_elements instructionBjörn Gustavsson
See the previous commit for justification and use cases.