aboutsummaryrefslogtreecommitdiffstats
path: root/erts/emulator/beam/utils.c
AgeCommit message (Collapse)Author
2016-11-22Merge branch 'maint'Sverker Eriksson
2016-11-17erts: Tweak PSTACK to avoid warningSverker Eriksson
warning: array subscript is below array bounds and ok, it's technically undef behavior to set pointer before first array element.
2016-11-17erts: Refactor crash dumping with cbprintfSverker Eriksson
Instead of passing around a file descriptor use a function pointer to facilitate more advanced backend write logic such as size limitation or compression.
2016-10-12erts: Refactor out func_info into structLukas Larsson
This commit adds two new structs to be used to represent erlang code in erts. ErtsCodeInfo is used to describe the i_func_info header that is part of all Export entries and the prelude of each function. This replaces all the BeamInstr * that were previously used to point to these locations. After this change the code should never use BeamInstr * with offsets to figure out different parts of the func_info header. ErtsCodeMFA is a struct that is used to descripe a MFA in code. It is used within ErtsCodeInfo and also in Process->current. All function that previously took Eterm * or BeamInstr * to identify a MFA now use the ErtsCodeMFA or ErtsCodeInfo where appropriate. The code has been tested to work when adding a new field to the ErtsCodeInfo struct, but some updates are needed in ops.tab to make it work.
2016-08-30Ensure correct mbuf_sz value in process structureRickard Green
2016-07-21erts: Fix internal hashing entropy for mapsBjörn-Egil Dahlberg
We need to use an initial hash seed for each map pair, i.e. the hash value. The hash value is reset to the seed for each pair instead of setting the seed to zero. If we don't, no additional entropy is given to the system and the hash collision resolution in maps:from_list/1 would fail.
2016-07-21erts: Fix whitespacesBjörn-Egil Dahlberg
2016-05-31Do not send on_heap msgs to error logger in non-smp emulatorRickard Green
2016-05-25erts: Make erlang:halt/2 truncate string argSverker Eriksson
if too long.
2016-05-09Merge branch 'sverker/trace-send-receive-matchspec/OTP-13507'Sverker Eriksson
2016-05-04erts: Add Sender in 'receive' trace matchspecSverker Eriksson
All 'EXIT' and monitor messages are sent from 'system' Timeouts are "sent" from 'clock_service'
2016-04-26erts: Remove some dead codeLukas Larsson
2016-04-15erts: Implement tracer modulesLukas Larsson
Add the possibility to use modules as trace data receivers. The functions in the module have to be nifs as otherwise complex trace probes will be very hard to handle (complex means trace probes for ports for example). This commit changes the way that the ptab->tracer field works from always being an immediate, to now be NIL if no tracer is present or else be the tuple {TracerModule, TracerState} where TracerModule is an atom that is later used to lookup the appropriate tracer callbacks to call and TracerState is just passed to the tracer callback. The default process and port tracers have been rewritten to use the new API. This commit also changes the order which trace messages are delivered to the potential tracer process. Any enif_send done in a tracer module may be delayed indefinitely because of lock order issues. If a message is delayed any other trace message send from that process is also delayed so that order is preserved for each traced entity. This means that for some trace events (i.e. send/receive) the events may come in an unintuitive order (receive before send) to the trace receiver. Timestamps are taken when the trace message is generated so trace messages from differented processes may arrive with the timestamp out of order. Both the erlang:trace and seq_trace:set_system_tracer accept the new tracer module tracers and also the backwards compatible arguments. OTP-10267
2016-03-15update copyright-yearHenrik Nord
2016-02-24Merge branch 'master' into sverk/master/halt-INT_MINSverker Eriksson
2016-02-24erts: Change erl_exit into erts_exitSverker Eriksson
This is mostly a pure refactoring. Except for the buggy cases when calling erlang:halt() with a positive integer in the range -(INT_MIN+2) to -INT_MIN that got confused with ERTS_ABORT_EXIT, ERTS_DUMP_EXIT and ERTS_INTR_EXIT. Outcome OLD erl_exit(n, ) NEW erts_exit(n, ) ------- ------------------- ------------------------------------------- exit(Status) n = -Status <= 0 n = Status >= 0 crashdump+abort n > 0, ignore n n = ERTS_ERROR_EXIT < 0 The outcome of the old ERTS_ABORT_EXIT, ERTS_INTR_EXIT and ERTS_DUMP_EXIT are the same as before (even though their values have changed).
2016-02-18Merge branch 'sverk/fix-list-length-int/OTP-13288'Sverker Eriksson
* sverk/fix-list-length-int/OTP-13288: erts: Fix error cases in enif_get_list_length erts: Use Sint instead of int for list lengths
2016-02-15Avoid erts_cmp jump in atom, int and float comparisonsJosé Valim
Given the function definition below: check(X) when X >= 0, X <= 20 -> true. @nox has originally noticed that perfoming lt and ge guard tests were performing slower than they should be. Further investigation revealed that most of the cost was in jumping to the erts_cmp function. This patch brings the operations already inlined in erts_cmp into the emulator, removing the jump cost. After applying these changes, invoking the check/1 function defined above 30000 times with different values from 0 to 20 has fallen from 367us to 213us (measured as average of 3 runs). This is a considerably improvement over Erlang 18 which takes 556us on average. Floats have also dropped their time from 1126us (on Erlang 18) to 613us.
2016-02-08erts: Use Sint instead of int for list lengthsRichard Carlsson
This avoids potential integer arithmetic overflow for very large lists.
2015-11-30Merge branch 'maint'Rickard Green
* maint: Remove ERTS_PRINT_INVALID from erts_print()
2015-11-30Remove ERTS_PRINT_INVALID from erts_print()Rickard Green
ERTS_PRINT_INVALID prevented file descriptor 0 to be used which could cause an empty crash dump.
2015-11-16An implementation of lightweight unbounded queuesNikolaos S. Papaspyrou
2015-11-12Merge branch 'rickard/ohmq/OTP-13047'Rickard Green
* rickard/ohmq/OTP-13047: Fragmented young heap generation and off_heap_message_queue option Refactor GC Introduce literal tag Conflicts: erts/doc/src/erlang.xml erts/emulator/beam/erl_gc.c
2015-11-12Fragmented young heap generation and off_heap_message_queue optionRickard Green
* The youngest generation of the heap can now consist of multiple blocks. Heap fragments and message fragments are added to the youngest generation when needed without triggering a GC. After a GC the youngest generation is contained in one single block. * The off_heap_message_queue process flag has been added. When enabled all message data in the queue is kept off heap. When a message is selected from the queue, the message fragment (or heap fragment) containing the actual message is attached to the youngest generation. Messages stored off heap is not part of GC.
2015-09-07Merge branch 'maint'Sverker Eriksson
2015-09-02Merge branch 'maint' into sverk/trace-process_dump-matchstateSverker Eriksson
Conflicts: erts/emulator/beam/erl_printf_term.c erts/emulator/beam/erl_term.c erts/emulator/beam/utils.c
2015-09-01erts: Fix bug when tracing with 'process_dump'Sverker Eriksson
If the process stack contained a match state the print function would crash the vm as it was not recognized by tag_val_def(). Add new MATCHSTATE_DEF returned by tag_val_def(). All other callers either ignore it or has a default clause to handle invalid terms.
2015-06-24erts: Remove halfword BINARY RELsBjörn-Egil Dahlberg
* ERTS_GET_BINARY_BYTES_REL * ERTS_GET_REAL_BIN_REL
2015-06-24erts: Remove halfword is_same bases macroBjörn-Egil Dahlberg
Keep is_same macro for readability but remove base pointers.
2015-06-24erts: Remove halfword basic relative heap operationsBjörn-Egil Dahlberg
2015-06-24erts: Remove HALFWORD_HEAP definitionBjörn-Egil Dahlberg
2015-06-18Change license text to APLv2Bruce Yinhe
2015-06-08erts: Fix faulty list optimization in make_internal_hashBjörn-Egil Dahlberg
Reported-by: Rory Byrne
2015-05-12erts: Fix erts_send_error_term_to_logger memory leakBjörn-Egil Dahlberg
2015-05-11Add erts_send_error_term_to_loggerJosé Valim
This function allows us to send format and args to the logger which can then be formatted and customized from Erlang land.
2015-05-08Merge branch 'rickard/timer-optimization/OTP-12650'Rickard Green
* rickard/timer-optimization/OTP-12650: Optimized timer implementation Reusable red-black tree implementation Conflicts: erts/emulator/beam/erl_bif_timer.c
2015-05-08Optimized timer implementationRickard Green
2015-05-06erts: Don't let the compiler optimize pos. zero fixBjörn-Egil Dahlberg
2015-04-22erts: Brute force float comparisons as wellBjörn-Egil Dahlberg
Increases float comparison speed by ~120%
2015-04-20erts: Fix halfword compareBjörn-Egil Dahlberg
2015-04-17Merge branch 'egil/cmp-immediate-optimization/OTP-12663'Björn-Egil Dahlberg
* egil/cmp-immediate-optimization/OTP-12663: erts: Optimize comparison operator for frequent immediates
2015-04-15erts: Optimize comparison operator for frequent immediatesBjörn-Egil Dahlberg
* small integers * atoms
2015-04-14erts: Refactor erts_queue_messageBjörn-Egil Dahlberg
2015-04-10Merge branch 'egil/fix-hash-float-zero/OTP-12641'Björn-Egil Dahlberg
* egil/fix-hash-float-zero/OTP-12641: erts: Ensure hashing of zero is consistent
2015-04-10erts: Ensure hashing of zero is consistentBjörn-Egil Dahlberg
Erlang treats positive and negative zero as equal, meaning, true = 0.0 =:= 0.0/-1 However, Erlangs hash functions: hash, phash and phash2 did not reflect this behaviour. Meaning, the hash values produced by the different hash functions would not be identical for positive and negative zero. This commit ensures that hash value of positive zero is always produced regardless of the signedness of the zero float, i.e. true = erlang:phash2(0.0) =:= erlang:phash2(0.0/-1)
2015-04-08Merge branch 'sverk/refactor-encode-size/OTP-12585'Sverker Eriksson
* sverk/refactor-encode-size/OTP-12585: erts: Optimize insert and delete for big maps erts: Optimize == and /= for unequal big maps erts: Refactor encode_size_struct_int Conflicts: erts/emulator/beam/erl_map.c
2015-03-31erts: Remove unused tmp heap in make_internal_hashBjörn-Egil Dahlberg
2015-03-30erts: Optimize == and /= for unequal big mapsSverker Eriksson
Bail out as soon as we find a diff between maps if we are not interested in term order.
2015-03-27erts: Fix make_internal_hash for 0.0 vs -0.0Björn-Egil Dahlberg
The internal_hash should produce the same hash value for identical terms, in this case 0.0 =:= -0.0.
2015-03-26erts: Fix missing case in make_internal_hashBjörn-Egil Dahlberg