| Age | Commit message (Collapse) | Author |
|---|
|
* rickard/halfword-bug:
Fix newly introduced halfword emulator bugs
|
|
|
|
It seems to work (at least on a little-endian architecture)
by sheer luck.
|
|
In a70159b33f20a26b2674d7cf777617c5f0261a5c, the _VOID_ macro
was eliminated, but one use of it inside an "#ifdef DEBUG"
was forgotten.
|
|
* rickard/timer-wheel/OTP-8835:
Use mutex instead of rwlock
|
|
* pan/binary-bif-valgrind-leak/OTP-8823:
Teach erl_bif_binary not leak memory by doing malloc(0)
|
|
Use mutex instead of rwlock since the read lock is more or less
unused and it can be quite contended.
|
|
Spin wait on most ethread rwlocks used by the runtime system was
unintentionally disabled during development. Spin wait has now been enabled
again. This bug appeared in commit 59ee2a593090e7d53c97ceba63cbd300d1b9657e,
i.e., it has not been seen in any released versions.
|
|
|
|
The scheduler wakeup threshold is now possible to adjust at system boot.
For more information see the `+swt' command line argument of `erl'.
|
|
Lower the scheduler wakeup threshold since schedulers aren't spuriously
woken as before (since commit 59ee2a593090e7d53c97ceba63cbd300d1b9657e).
|
|
Added erlang:system_info(build_type) which makes it
easier to chose drivers, NIF libraries, etc based
on build type of the runtime system.
|
|
* rickard/cpu-info-testcase/OTP-8765:
Fix crash when calling erlang:system_info(update_cpu_info)
Add testcase for erlang:system_info(update_cpu_info)
|
|
* pg/fix-segfault-on-crash_dump-with-hipe:
Fix segmentation fault when dumping the crash log with hipe enabled and natively compiled modules
OTP-8801
|
|
* mp/fix-hipe-on_load_crash:
fix native code crash when calling unloaded module with on_load function
OTP-8799
|
|
Calling erlang:system_info(update_cpu_info) on platforms where no
CPU topology was found could result in a crash if other CPU
information had changed. This bug was introduced in the 'dev'
branch before R14B (commit 1b273b618002d65159453fdfb9520a9476e4423a).
That is, the bug has never been seen in a released runtime system.
|
|
* rickard/cpu-info-unbind/8765:
Fix erroneous error reports about unbind failure
|
|
On platforms where binding of schedulers is not supported, numerous error
reports on the form "Scheduler <N> failed to unbind from cpu -1: enotsup"
were erroneously issued. This bug was introduced in the 'dev' branch
before R14B (commit 1b273b618002d65159453fdfb9520a9476e4423a). That is,
the bug has never been seen in a released runtime system.
Reported-By: Tuncer Ayaz
|
|
* pan/ets_binary_overhead/OTP-8762:
Remove binary overhead counter from ets objects
|
|
* sverker/NIF-64bit-integers/OTP-8746:
Make windows 64bit types be declared more consistently
Teach Windows about the int64 functions
NIF doc official support note
NIF 64-bit integer support
|
|
* egil/R14A/binary-gc-wrap/OTP-8730:
Increase vheap counter to Uint64
Fix wrapping in next vheap calculation
|
|
* pan/local_univ_time_bsd/OTP-8580:
Teach erl_time_sup to handle timezones w/o DST on FreeBSD as on other platforms
|
|
* rickard/cpu-info/OTP-8765:
Initialize environment functionality after thread lib
Fix faulty assertions
Implement automatic detection of CPU topology on Windows
Make it possible to reread and update detected CPU information
|
|
natively compiled modules
When loading a module, code area is allocated and header fields
code[MI_ATTR_SIZE] as well as code[MI_COMPILE_SIZE] are not
cleared. They are only set later when freeze_code is called, if the
module has attributes and compilation info, which should always be the
case. When loading a native module (as a stub), code is allocated as
well (to contain the stub functions), and code[MI_ATTR_SIZE] as well
as code[MI_COMPILE_SIZE] are not cleared either. Yet, freeze_code will
not be called (since there is no threaded code to freeze for native
modules), and as a result, these header fields are never set. They can
contain any garbage.
Later on, when writing a crash dump, the attributes and compilation
info are dumped, using these particular header fields. If the size is
garbage, the dump attribute function will iterate until it segfaults.
The fix consists in clearing code[MI_ATTR_SIZE] and
code[MI_COMPILE_SIZE] in both cases (threaded code and native
code). Even if non-native modules should contain code and attributes
and therefore the values code[MI_ATTR_SIZE] and code[MI_COMPILE_SIZE]
should be set by freeze_code, it seems cleaner and easier to maintain
to clear the whole the header in the "initialize code area"
section. As a result, crash dump will not segfault. Instead, native
modules will have an empty attributes and compilation info section in
the crash dump.
|
|
As reported in erlang-bugs, the following sequence of events crashes the VM:
1. Module M1 is loaded and in native mode.
2. Module M2 is not loaded, in emulated mode, and has an on_load function.
3. M1 calls some function in M2. This works.
4. M1 again calls some function in M2. This segfaults.
The reason for the crash is that when the beam loader fixes up export
entries after a successful on_load function call, it erroneously clears
the ->code[3] field in that module's export entries. This is redundant
(no code in beam relies on ->code[3] being NULL), inconsistent with
modules without on_load functions (there ->code[3] remains a valid beam
instruction after the module is loaded), and breaks native code which needs
the old ->address value in an export entry to remain valid after a module
load step (before the load ->address points to ->code[3], after the load
->address points to the real code but uses of the old ->address value
remain so ->code[3] must remain valid).
Thus the fix for the crash is to simply not clear ->code[3].
This patch fixes R14A and should also fix R13B04.
(There does exist a performance bug in this area, but it is unrelated
to the on_load feature so will be fixed separately.)
|
|
* bjorn/remove-elib_malloc/OTP-8764:
erts: Remove broken elib_malloc
erts: Remove the unused mem_drv driver
erts: Remove stray pre-ISO-C compatibility macros
erts: Remove unused decl.h
|
|
* rickard/fix-faulty-assert/OTP-8759:
Fix faulty no_empty_run_queues assertion
|
|
As the overhead counter got larger and never really was needed in ets objects,
I removed them.
A few stray comments of XXX:PaN type from halfword dev removed in the process.
|
|
Calling erlang:system_info/1 with the new argument 'update_cpu_info'
will make the runtime system reread and update the internally stored
CPU information. For more information see the documentation of
erlang:system_info(update_cpu_info).
|
|
elib_malloc is an alternate memory allocator that
is no longer possible to build.
|
|
A long time ago, the Erlang run-time system could be
build with pre-ANSI/ISO-C (K&R) C compilers, but that is
no longer possible. Remove the remaining uses of the
compatibility macros that made it possible that possible.
|
|
The header file erts/emulator/beam/decl.h is no longer used.
|
|
This will reduce the risk of integer wrapping in bin vheap counting.
The vheap size series will now use the golden ratio instead of doubling
and fibonacci sequences.
OTP #8730
|
|
OTP #8730
|
|
* bjorn/remove-obsolete-driver-support/OTP-8758:
Remove obsolete/driver.h and the associated functionality
|
|
For a short period of time no_empty_run_queues may have
been increased twice for a specific run queue. Two
assertions did not take this into account.
|
|
|
|
The obsolete/driver.h header file has been obsolete
since R8B.
Remove that file, along with obsolete thread APIs for
drivers in the emulator and the test cases.
|
|
|
|
* rickard/trailing-data-alignment/OTP-8754:
Align trailing message data for all types of structures
|
|
* rickard/ethread-rewrite/OTP-8544:
Rewrite ethread library
|
|
Large parts of the ethread library have been rewritten. The
ethread library is an Erlang runtime system internal, portable
thread library used by the runtime system itself.
Most notable improvement is a reader optimized rwlock
implementation which dramatically improve the performance of
read-lock/read-unlock operations on multi processor systems by
avoiding ping-ponging of the rwlock cache lines. The reader
optimized rwlock implementation is used by miscellaneous
rwlocks in the runtime system that are known to be read-locked
frequently, and can be enabled on ETS tables by passing the
`{read_concurrency, true}' option upon table creation. See the
documentation of `ets:new/2' for more information.
The ethread library can now also use the libatomic_ops library
for atomic memory accesses. This makes it possible for the
Erlang runtime system to utilize optimized atomic operations
on more platforms than before. Use the
`--with-libatomic_ops=PATH' configure command line argument
when specifying where the libatomic_ops installation is
located. The libatomic_ops library can be downloaded from:
http://www.hpl.hp.com/research/linux/atomic_ops/
The changed API of the ethread library has also caused
modifications in the Erlang runtime system. Preparations for
the to come "delayed deallocation" feature has also been done
since it depends on the ethread library.
Note: When building for x86, the ethread library will now use
instructions that first appeared on the pentium 4 processor. If
you want the runtime system to be compatible with older
processors (back to 486) you need to pass the
`--enable-ethread-pre-pentium4-compatibility' configure command
line argument when configuring the system.
|
|
Alignment of trailing data in messages has been adjusted.
This in order to be able to pass data of any type as
trailing data in the future.
|
|
|
|
|
|
* sverker/one_offheap_list/OTP-8737:
One off-heap list, to eliminate two words per ETS object.
|
|
Merging the three off-heap lists (binaries, funs and externals) into
one list. This reduces memory consumption by two words (pointers) per
ETS object.
|
|
* sverker/ets_select_hang/OTP-8732:
Fix ets:select hanging on ordered_set with empty list as key.
|
|
* sverker/full_INTEGER_EXT/OTP-8540:
term_to_binary use all 32 bits of INTEGER_EXT
|
|
* sverker/driver_int64_bug/OTP-8716:
Fix bug that caused faulty 64-bit integers from drivers.
|
