| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
* bjorn/unicode-noncharacters/OTP-9624:
Allow noncharacter code points in unicode encoding and decoding
|
|
* fm/enif_is_number:
Add NIF function enif_is_number
Conflicts:
erts/emulator/beam/erl_nif_api_funcs.h
OTP-9629
|
|
The two noncharacter code points 16#FFFE and 16#FFFF were not
allowed to be encoded or decoded using the unicode module or
bit syntax. That causes an inconsistency, since the noncharacters
16#FDD0 to 16#FDEF could be encoded/decoded.
There is two ways to fix that inconsistency.
We have chosen to allow 16#FFFE and 16#FFFF to be encoded and
decoded, because the noncharacters could be useful internally
within an application and it will make encoding and decoding
slightly faster.
Reported-by: Alisdair Sullivan
|
|
Each gc_bif[123] instruction must have both a transformation in
ops.tab and special code in gen_guard_bif[123]().
Rewrite it to do most of the work in gen_guard_bif[123]().
|
|
In the handling of generic instructions, we used to always
test whether the instruction was 'too_old_compiler' and abort
loading with a special error message.
Refactor the code so that we only do test if we an error
has occurred. That will allow us to make the test more expensive
in the future, allowing us to customize error messages for certain
opcode without any cost in the successful case.
|
|
|
|
'store_var' is always followed by 'next_arg'.
|
|
'next_instr' is always followed by 'is_op'.
|
|
Since the 'new_instr' instruction always occurs before the
'store_op' instruction, we can merge the instructions into one.
Also, there is no need to include the arity of the BEAM
instruction as an operand, since the arity can be looked up
based on the opcode.
|
|
A 'call' instruction in the loader transformation language is
always followed by an 'end' instruction, so we can replace the
'call' instruction with a 'call_end' instruction.
|
|
We don't need type constraints that essentially are assertions;
the wrong type will be detected and loading aborted when no specific
instruction can be found.
|
|
If the left part of a transformation will always match, omit the
the 'try_me_else' and 'fail' instructions.
As part of this optimization, make it an error to have a
transformation that can never be reached because of a previous
transformation that will always match. (Remove one transformation
from ops.tab that was found to be unreachable.)
|
|
is_list/2 and other test instructions with a zero label was last
generated by the v1 BEAM compiler which was last supported in R6B.
Since BEAM modules produced by that compiler will be rejected with
a nice error message for other reasons (e.g. by the test for the
module_info/0,1 functions), retaining those transformations serves
no useful purpose.
|
|
The hybrid-heap emulator is broken since R12, so there is no
need to keep those instructions.
|
|
Ancient versions of BEAM compiler could generate move instruction with
the same source and destination registers, so the loader would optimize
away such instructions.
|
|
* dev:
Update copyright years
|
|
|
|
* dev:
Prevent valgrind warning for erts_alloc_permanent_cache_aligned
[erts] Fix memory leak in erts_make_stub_module (hipe loading)
|
|
|
|
Code area allocation was done twice; first in read_code_header()
and then in erts_make_stub_module() itself.
|
|
* dev:
[erl_docgen] Missing header level in PDF bookmarks menu
Fixed version, release notes and appup in prep for release.
Fix lost wakeup of scheduler when enqueuing auxiliary work
|
|
* rickard/aux-work-bug/OTP-9567:
Fix lost wakeup of scheduler when enqueuing auxiliary work
|
|
When auxiliary work was enqueued on a scheduler, the wakeup of
the scheduler in order to handle this work could be lost. Wakeups
in order to handle ordinary work were not effected by this bug.
The bug only effected runtime systems with SMP support as follows:
* Deallocation of some ETS data structures could be delayed.
* On Linux systems not using the NPTL thread library (typically
ancient systems with kernel versions prior to 2.6) and Windows
systems, the {Port, {exit_status, Status}} message from a
terminating port program could be delayed. That is, it only
effected port programs which had been started by passing
exit_status as an option to open_port/2.
|
|
Conflicts:
erts/aclocal.m4
erts/include/internal/ethread_header_config.h.in
|
|
* ta/docs-fixes:
Fix misspelling of intermediate
Fix typos in erts/preloaded/src
Fix more misspellings of compatibility
Fix misspelling of kept
Fix misspelling of compatibility in ssl_basic_SUITE
Fix misspelling of compatibility
Fix misspelling of accommodate
Fix misspelling of exceed
Fix misspelling of accidentally
Fix misspelling of erroneous in xmerl_xsd
Fix misspelling of erroneous
Fix misspelling of successful
Fix typos in instrument(3)
Fix typos in dbg(3)
dialyzer: fix a small typo in list_to_bitstring test
Fix typos in cover.erl
Fix typos (variable name) in erl_nif(3)
Fix typos in mod_esi(3)
Fix trivial typos in erlang(3)
OTP-9555
|
|
|
|
* rickard/glibc-mutex-destroy-bug/OTP-9373:
Do not abort emulator when buggy pthread impl return EBUSY
|
|
* dev:
Cleanup ETS bif's in hipe:erl_bif_types.erl (for dialyzer)
Conflicts:
erts/emulator/beam/erl_db.c
|
|
* pan/erl-bif-types/OTP-9496:
Cleanup ETS bif's in hipe:erl_bif_types.erl (for dialyzer)
|
|
* dev:
Move init of smp rw mutex from init to sys_args to make sure that it is initialized before the first erts_sys_getenv call
Move erts_sys_env_init() to erts_sys_pre_init()
Remove _DEBUG from start_erl.c
Spelling correction in erlsrv doc
Convert windows start_erl to take rootdir on command line
Add command start_disabled to erlsrv
Add global lock for erlsrv to avoid races
Change start order so that service_event gets initialized before it's used
Conflicts:
erts/emulator/sys/win32/sys.c
|
|
* pan/win_erlsrv_stop/OTP-9344:
Move init of smp rw mutex from init to sys_args to make sure that it is initialized before the first erts_sys_getenv call
Move erts_sys_env_init() to erts_sys_pre_init()
Remove _DEBUG from start_erl.c
Spelling correction in erlsrv doc
Convert windows start_erl to take rootdir on command line
Add command start_disabled to erlsrv
Add global lock for erlsrv to avoid races
Change start order so that service_event gets initialized before it's used
|
|
|
|
* dev:
Make sure we have a run_queue
|
|
* bjorn/erts/unify-register-allocation:
BEAM: Unify allocation of X and float registers
|
|
* In rare cases we could have no run_queue in schedule misc ops
|
|
|
|
|
|
* fm/enif_compare-64-to-32bits-cast:
Fix enif_compare on 64bits machines
OTP-9533
|
|
In the half-word emulator, smp emulator, and non-smp emulator
the X register and float register arrays were allocated in
different ways.
Always allocate the registers and store the pointers to the
allocated register arrays in the scheduler data.
|
|
In 64bits machines the Sint type has a size of 8 bytes,
while on 32bits machines it has a 4 bytes size.
enif_compare was ignoring this and therefore returning
incorrect values when the result of the CMP function
(which returns a Sint value) doesn't fit in 4 bytes.
For example, passing the operands -1294536544000 and
-1178704800000 to enif_compare would trigger the bug.
|
|
This BIF's second parameter is a list of options.
Currently the only allowed option is {minor_version, Version}
where version is either 0 (default) or 1.
|
|
* dev:
code: Optimize purge/1 and soft_purge/1 using check_old_code/1
Add erlang:check_old_code/1
check_process_code/2: Quickly return 'false' if there is no old code
|
|
* bjorn/line-numbers-in-exceptions/OTP-9468: (51 commits)
debugger: By default, only save non-tail-recursive calls
debugger: Add line_number_SUITE
debugger: Include line numbers in exceptions
Update examples in the documentation to include line numbers
Update documentation for erlang:raise/3 and erlang:get_stacktrace/0
beam_lib: Retain the "Line" chunk when stripping BEAM files
erl: Add +L to suppress loading of line number information
compiler: Add no_line_info for suppressing line/1 instructions
exception_SUITE: Test line numbers in exceptions
common_test: Use line numbers in exceptions
common_test tests: Don't do detailed testing of the stack backtrace
test_server: Refactor init_per_testcase/3 into two functions
Implement process_info(Pid, current_{location,stacktrace})
beam_emu: Factor out saving of stack trace from save_stacktrace()
compiler: Don't create filenames starting with "./"
ops.tab: Remove line instructions before tail-recursive calls
Lookup and include filenames and line numbers in exceptions
Fix decrement of continuation pointers
Refactor building of the exception stacktrace
BEAM loader: Load the line table
...
|
|
|
|
Add erlang:check_old_code/1 to quickly check whether a module
has old code. If there is no old code, there is no need to call
erlang:check_process_code/2 for all processes, which will save
some time if there are many processes.
|
|
There is no need to suspend the process if the module has no old
code. Measurements show that this change will make
erlang:check_process_code/2 in an SMP emulator about four times
faster if the module has no old code.
|
|
* rc/r14-gc-fix:
fix 64-bit issues in the garbage collection
OTP-9488
|
|
|
