Age | Commit message (Collapse) | Author |
|
|
|
|
|
* sverker/inline-sys_memcpy:
erts: Fix some zero size sys_memcpy
|
|
Communication between Erlang processes has conceptually always been
performed through asynchronous signaling. The runtime system
implementation has however previously preformed most operation
synchronously. In a system with only one true thread of execution, this
is not problematic (often the opposite). In a system with multiple threads
of execution (as current runtime system implementation with SMP support)
it becomes problematic. This since it often involves locking of structures
when updating them which in turn cause resource contention. Utilizing
true asynchronous communication often avoids these resource contention
issues.
The case that triggered this change was contention on the link lock due
to frequent updates of the monitor trees during communication with a
frequently used server. The signal order delivery guarantees of the
language makes it hard to change the implementation of only some signals
to use true asynchronous signaling. Therefore the implementations
of (almost) all signals have been changed.
Currently the following signals have been implemented as true
asynchronous signals:
- Message signals
- Exit signals
- Monitor signals
- Demonitor signals
- Monitor triggered signals (DOWN, CHANGE, etc)
- Link signals
- Unlink signals
- Group leader signals
All of the above already defined as asynchronous signals in the
language. The implementation of messages signals was quite
asynchronous to begin with, but had quite strict delivery constraints
due to the ordering guarantees of signals between a pair of processes.
The previously used message queue partitioned into two halves has been
replaced by a more general signal queue partitioned into three parts
that service all kinds of signals. More details regarding the signal
queue can be found in comments in the erl_proc_sig_queue.h file.
The monitor and link implementations have also been completely replaced
in order to fit the new asynchronous signaling implementation as good
as possible. More details regarding the new monitor and link
implementations can be found in the erl_monitor_link.h file.
|
|
|
|
The BeamOp() macro in erl_vm.h is clumsy to use. All users
cast the return value to BeamInstr.
Define new macros that are easier to use. In the future,
we might want to pack an operand into the same word as
the pointer to the instruction, so we will define two macros.
BeamIsOpCode() is used to rewrite code like this:
if (Instr == (BeamInstr) BeamOp(op_i_func_info_IaaI) {
...
}
to:
if (BeamIsOpCode(Instr, op_i_func_info_IaaI)) {
...
}
BeamOpCodeAddr(op_apply_bif) is used when we need the address
for an instruction.
Also elimiminate the global variables em_* in beam_emu.c.
They are not really needed. Use the BeamOpCodeAddr() macro
instead.
|
|
|
|
|
|
This refactor was done using the unifdef tool like this:
for file in $(find erts/ -name *.[ch]); do unifdef -t -f defile -o $file $file; done
where defile contained:
#define ERTS_SMP 1
#define USE_THREADS 1
#define DDLL_SMP 1
#define ERTS_HAVE_SMP_EMU 1
#define SMP 1
#define ERL_BITS_REENTRANT 1
#define ERTS_USE_ASYNC_READY_Q 1
#define FDBLOCK 1
#undef ERTS_POLL_NEED_ASYNC_INTERRUPT_SUPPORT
#define ERTS_POLL_ASYNC_INTERRUPT_SUPPORT 0
#define ERTS_POLL_USE_WAKEUP_PIPE 1
#define ERTS_POLL_USE_UPDATE_REQUESTS_QUEUE 1
#undef ERTS_HAVE_PLAIN_EMU
#undef ERTS_SIGNAL_STATE
|
|
|
|
instead of ugly negative indexing.
|
|
to long lived, short lived and native stack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is mostly a pure refactoring.
Except for the buggy cases when calling erlang:halt() with a positive
integer in the range -(INT_MIN+2) to -INT_MIN that got confused with
ERTS_ABORT_EXIT, ERTS_DUMP_EXIT and ERTS_INTR_EXIT.
Outcome OLD erl_exit(n, ) NEW erts_exit(n, )
------- ------------------- -------------------------------------------
exit(Status) n = -Status <= 0 n = Status >= 0
crashdump+abort n > 0, ignore n n = ERTS_ERROR_EXIT < 0
The outcome of the old ERTS_ABORT_EXIT, ERTS_INTR_EXIT and
ERTS_DUMP_EXIT are the same as before (even though their values have
changed).
|
|
|
|
|
|
* sverk/hipe-inline-reserve-trap-frame:
erts: Extend usage of ASM macro to avoid including asm macros in C code
erts: Make hipe_{un}reserve_beam_trap_frame INLINE
|
|
|
|
|
|
Symptom: base64_SUITE:roundtrip crashes with hipe compiled stdlib.
Problem: HIPE_WRAPPER_BIF_DISABLE_GC pushed a "trap frame", but the frame
was only popped if the call was recursive.
Solution: Only reserve "trap frame" if BIF call is recursive.
|
|
The trap_frame got pushed twice, first by the wrapper then by
hipe_push_beam_trap_frame as it was looking at F_DISABLE_GC.
|
|
Make hipe to beam calls use export entry.
Makes it a lot easier to handle global tracing correctly
(breakpoints in export entry). A beam function should now be traced
correctly regardless how it is called.
This will also fix a SEGV crash when a hipe stub is made pointing into
a traced export entry and tracing is then stopped which clears the export
entry causing the hipe stub to execute beam instruction NULL.
This commit assumes that hipe code never calls local beam functions, which
should be the case nowadays as we only hipe compile entire modules.
|
|
by combining hipe.ncallee and hipe.closure in a union
as the comment indicate should be possible.
|
|
* sverk/hipe-disable-gc-bug:
erts: Fix heap overwrite by hipe "trap frames" when GC is disabled
ASSERT that GC is not tried with "need" when GC is disabled
|
|
by trapping BIFs like term_to_binary and binary_to_term.
|
|
|
|
|
|
|
|
Seems to apply to Sparc and ARM as well (even if not observed).
|
|
Add hipe_debug_bif_wrapper() as a wrapper for every BIF
called by native code.
|
|
|
|
In the half-word emulator, smp emulator, and non-smp emulator
the X register and float register arrays were allocated in
different ways.
Always allocate the registers and store the pointers to the
allocated register arrays in the scheduler data.
|
|
This commit is a preparation for introducing location information
(filename/line number) in stacktraces in exceptions. Currently
a stack trace looks like:
[{Mod1,Function1,Arity1},
.
.
.
{ModN,FunctionN,ArityN}]
Add a forth element to each tuple that can be used indication
the filename and line number of the source file:
[{Mod1,Function1,Arity1,Location1},
.
.
.
{ModN,FunctionN,ArityN,LocationN}]
In this commit, the fourth element will just be an empty list,
and we will change all code that look at or manipulate stacktraces.
|
|
F_HIBERNATE_SCHED flag that was introduced in b7ecdcd1ae9e11b8f75e must
be cleared in hipe_mode_switch as well. Otherwise, processes running
HiPE code that hibernate, wake up and then trap into a BIF will not be
rescheduled.
|
|
* ks/hipe-ppc64:
Enable HiPE by default when compiling for PPC64
Translate RTL to PPC code on PPC64 too
Changes in ppc files for PPC64
Additions for the PPC64 backend
Changes for the PPC64 backend
Added loader for ppc64
New files for the 64-bit backends
Cleanup tags
OTP-9198
|
|
|
|
|
|
This commit fixes four related bugs:
- calling hibernate/3 using a dynamic call would fail with badarg
as hibernate/3 as a BIF was not implemented. hibernate/3 is generally
provided as a Beam instruction, and code is translated to use this
instruction when loaded.
- calling hibernate/3 from HiPE would fail with badarg because this
would call the aforementioned BIF which was not implemented.
- calling hibernate/3 with some HiPE-native garbage in the process heap
would randomly crash at the next garbage collect. This bug only
happened in a complex, yet reproduceable scenarios, where native code
calls beam code that calls hibernate/3, and the process has some
garbage when being hibernated and the process generates garbage when
awaken.
- when entering HiPE, the process current_function can be set and be
inaccurate.
The fix is three folded:
- hibernate_3 BIF now actually works instead of throwing a badarg. While
hibernate_3 BIF was (usually) not called from BEAM, it is called from
HiPE. hibernate behaviour is very close to the scheduler and this is why
it is implemented as an instruction in BEAM. The fix consists in doing
the actual hibernation (through the now exported erts_hibernate
function) and setting the process flag to TRAP as well as the process
status to P_WAITING. On BIF epilogue in both BEAM and HiPE, this status
is tested on TRAP and if set, the scheduler is invoked. The i_hibernate
instruction and translation code is now redundant and could be deleted.
- hibernation now also empties the HiPE native stack, with a new
function hipe_empty_nstack provided by Mikael Pettersson.
- when entering HiPE through hipe_mode_switch, p->current is cleared,
as suggested by Mikael Pettersson. p->current normally hold a pointer to
the {M,F,A} of the current function if it exists. When hibernating, it
is set to {erlang,hibernate,3}, and all stdlib hibernate tests
(gen_server_SUITE:hibernate/1, proc_lib_suite:hibernate/1, etc.)
actually rely on this information. Clearing p->current fixes the tests
and avoids the surprise one might have when querying the process info
of a process that hibernated and woke up in a native function.
Non-regression tests are provided, a test for the dynamic call as well
as a Makefile-handled duplication of the hibernate_SUITE into
hibernate_native_SUITE for the HiPE case.
|
|
|