aboutsummaryrefslogtreecommitdiffstats
path: root/erts/epmd/src
AgeCommit message (Collapse)Author
2014-02-24ose: Fix various build environment issuesLukas Larsson
2014-02-24Added support for ENEA OSELukas Larsson
This port has support for both non-smp and smp. It contains a new way to do io checking in which erts_poll_wait receives the payload of the polled entity. This has implications for all linked-in drivers.
2014-01-14epmd: Fix -names option on WindowsJohannes Weißl
Since 3aa60cc `epmd -names` does not produce any output on Windows anymore. This patch uses fwrite() instead of write() which adds the necessary carriage returns to the output so that it is suitable for the Windows cmd.exe. A test case is added (fails on Windows without the patch).
2013-09-11Fix syslog definesMatt Lewandowsky
config.h defines HAVE_SYSLOG_H whereas the sources are looking for NO_SYSLOG to be undefined. As the logic of "if feature is available" makes more sense than "if feature is not unavailable", I opted for the config.h define.
2013-01-25Update copyright yearsBjörn-Egil Dahlberg
2013-01-23Merge branch 'sverk/r16/utf8-atoms'Sverker Eriksson
* sverk/r16/utf8-atoms: erl_interface: Fix bug when transcoding atoms from and to UTF8 erl_interface: Changed erlang_char_encoding interface erts: Testcase doing unicode atom printout with ~w erl_interface: even more utf8 atom stuff erts: Fix bug in analyze_utf8 causing faulty latin1 detection Add UTF-8 node name support for epmd workaround... Fix merge conflict with hasse UTF-8 atom documentation test case erl_interface: utf8 atoms continued Add utf8 atom distribution test cases atom fixes for NIFs and atom_to_binary UTF-8 support for distribution Implement UTF-8 atom support for jinterface erl_interface: Enable decode of unicode atoms stdlib: Fix printing of unicode atoms erts: Change internal representation of atoms to utf8 erts: Refactor rename DFLAG(S)_INTERNAL_TAGS for conformity Conflicts: erts/emulator/beam/io.c OTP-10753
2013-01-22Add UTF-8 node name support for epmdRickard Green
2013-01-15Implement ./otp_build configure --enable-silent-rulesAnthony Ramine
With silent rules, the output of make is less verbose and compilation warnings are easier to spot. Silent rules are disabled by default and can be disabled or enabled at will by make V=0 and make V=1.
2012-09-07Replace sprintf with erts_snprintf in epmdBjörn-Egil Dahlberg
2012-06-05Update to work with whitespace in exec pathLukas Larsson
OTP-10106 OTP-10107
2012-01-13erts,tools: Fix parallel make for erts/lib_srcRaimo Niskanen
Use a make timestamp file to condense dependencies to some part(s) of erts/lib_src build results.
2011-09-29Update copyright yearsBjörn-Egil Dahlberg
2011-09-08Merge branch 'hw/ignore-empty-epmd-address' into devHenrik Nord
* hw/ignore-empty-epmd-address: Let epmd ignore empty ERL_EPMD_ADDRESS OTP-9525
2011-08-30Merge branch 'ms/epmd-fix-compiler-warnings' into devHenrik Nord
* ms/epmd-fix-compiler-warnings: epmd: fix compiler warnings OTP-9500
2011-07-27Fix epmd crash on vxworks caused by faulty argument to selectSverker Eriksson
The first argument g->max_conn to select() in epmd_srv.c seems to be wrong as it excludes the listening socket(s). Instead we keep track of the highest fd seen. However I still don't understand why select() started to fail for vxworks with R14B03 when the feature of more than one listening socket was introduced. The default is still 1 listening socket (num_sockets=1), which would make the first argument to select() unchanged.
2011-07-13Let epmd ignore empty ERL_EPMD_ADDRESSHolger Weiß
If the environment variable ERL_EPMD_ADDRESS is set to the empty string, empd now behaves like it does by default when ERL_EPMD_ADDRESS is unset. That is, in this case, epmd now listens on all available interfaces instead of using only the loopback interface, which happened because epmd added the loopback address to the (in this case empty) list of addresses specified via ERL_EPMD_ADDRESS. Also, epmd now ignores ERL_EPMD_ADDRESS if it contains only separator characters (comma and space). The same applies to epmd's -address option.
2011-06-07epmd: fix compiler warningsMichael Santos
Suppress compiler warnings about ignored return values.
2011-05-20Update copyright yearsBjörn-Egil Dahlberg
2011-04-14Merge branch 'hw/fix-epmd-perror' into devHenrik Nord
* hw/fix-epmd-perror: Fix epmd's dbg_perror() output OTP-9223
2011-04-08Merge branch 'ms/epmd-local-access-check' into devHenrik Nord
* ms/epmd-local-access-check: epmd: include host address in local access check OTP-9214
2011-04-08Merge branch 'hw/epmd-bind-to-address' into devHenrik Nord
* hw/epmd-bind-to-address: Allow user to specify the IP address epmd binds to OTP-9213
2011-03-25Fix typo in epmd helpTuncer Ayaz
2011-01-11Remove special treatment of EADDRINUSEPatrik Nyblom
2011-01-11check return value of epmd server listen() callSteve Vinoski
The listen() call can fail due to a variety of conditions, so check its return value and if it fails, print a suitable debug message if appropriate and then exit. The exit values used are the same for those already used for bind() failures: 0 if the error is EADDRINUSE, 1 otherwise.
2010-11-26epmd: include host address in local access checkMichael Santos
In FreeBSD jails, the source and destination address of connections to localhost are changed to be the IP address of the jail. Consider connections from the host's IP address to itself (e.g., the source and destination address match) to be local for the access control checks. Reported-By: [email protected]
2010-11-17Allow user to specify the IP address epmd binds toHolger Weiß
The IP address(es) epmd binds to can now be specified by the user, either via epmd's new "-address" option or (if that's not used) by setting the environment variable ERL_EPMD_ADDRESS. Multiple addresses may be specified using a comma-separated list. If the loopback address is not in this list, it will be added implicitly, so that the daemon can be queried by an interactive epmd process.
2010-11-13Fix epmd's dbg_perror() outputHolger Weiß
The dbg_perror() function now hands the current errno value over to dbg_gen_printf(). This fixes the problem that errno had been reset to zero by the time it was used (to print the corresponding error message) in the dbg_gen_printf() function.
2010-10-13Update hint where to find epmd protocol spec in epmd_srv.c.Ralf Doering
With newer releases erts/emulator/internal_doc/erl_ext_dist.txt just forwards the reader to the ERTS User's Guide. Adjust the comment in epmd_srv.c to point to this location too. Signed-off-by: Ralf Doering <[email protected]>
2010-09-13Fix ei to build on vxworksBjörn-Egil Dahlberg
2010-08-31Restore null termination of input bufferPatrik Nyblom
2010-08-31Teach epmd_cli.c to not respond 'Killed' when killing deniedPatrik Nyblom
2010-08-31Calculate minimal packet size for ALIVE2 requests correctlyPatrik Nyblom
2010-08-31Document epmd and it's options properly and fixup help textPatrik Nyblom
2010-08-31Fix anomalies in epmd not yet reported as security issuesPatrik Nyblom
Use erts_(v)snprintf to ensure no buffer overruns in debug printouts. Disallow everything except port and name requests from remote nodes. Disallow kill command even from localhost if alive nodes exist. -relaxed_command_check when starting epmd returns the possibility to kill this epmd when nodes are alive (from localhost). Disallow stop command completely except if -relaxed_command_check is given when epmd was started. Environment variable ERL_EPMD_RELAXED_COMMAND_CHECK can be set to always get -relaxed_command_check.
2010-08-31Remove two buffer overflow vulnerabilities in EPMDPatrik Nyblom
2010-08-31Remove very old protocol from EPMDPatrik Nyblom
2010-08-04epmd: suppress startup messageMichael Santos
Running transient distributed Erlang nodes can generate a large number of informational messages to syslog. Modify epmd to log the startup message only when passed the debug switch. Reported-By: Sergey Samokhin
2010-07-07allow epmd -stop name to unregister a client from epmdSeven Du
2010-05-03Exit if an error occurs with the listening socketMichael Santos
Check errno if either select() or accept() returns an error and exit. This prevents epmd from looping and taking up 100% CPU.
2010-05-02Merge branch 'bg/remove-stray-ose-support' into devErlang/OTP
* bg/remove-stray-ose-support: configure: Remove stray OSE/Delta support Makefiles: Remove stray OSE/Delta support kernel tests: Remove stray OSE/Delta support system tests: Remove stray OSE/Delta support erl_interface tests: Remove stray OSE/Delta support epmd: Remove stray OSE/Delta support epmd: #ifdef out start_epmd() for other platforms than VxWorks emulator tests: Remove stray OSE/Delta support emulator: Remove stray OSE/Delta support emulator: Eliminate #ifdef for sys_tty_reset() test_server: Remove stray support for OSE/Delta OTP-8585 bg/remove-stray-ose-support
2010-04-30epmd: Remove stray OSE/Delta supportBjörn Gustavsson
2010-04-30epmd: #ifdef out start_epmd() for other platforms than VxWorksBjörn Gustavsson
There is no reason to define a function that is never used.
2010-03-23Fix compilation of epmd with IPv6 enabledJohn-Mark Bell
Modify IPv6 variants of SET_ADDR_LOOPBACK and SET_ADDR_ANY to use in6addr_loopback and in6addr_any.
2010-01-11Merge branch 'kj/epmd-port2resp-trunc-extra' into ccase/r13b04_devErlang/OTP
* kj/epmd-port2resp-trunc-extra: Handle "extra" field according to specs in ALIVE2_REQ and PORT2_RESP. OTP-8361 EPMD now correctly handles the extra data field which can be given in the ALIVE2_REQ request and retrieved in the PORT2_RESP response. (Thanks to Klas Johansson.)
2009-12-22Handle "extra" field according to specs in ALIVE2_REQ and PORT2_RESP.Klas Johansson
Don't let the length field pollute the value of the "extra" field in ALIVE2_REQ. Extra was read, starting at the second byte of the two byte length field, which meant that it was included in the result and the last byte of the value was skipped: if "extra" is <<1, 2>>, return <<0, 2, 1, 2>> not <<0, 2, 2, 1>> Increment the offset correctly when sending PORT2_RESP, in order to make sure the "extra" field won't be truncated: if "extra" is <<>>, return <<0, 0>> not <<0>> if "extra" is <<1, 2>>, return <<0, 2, 1, 2>> not <<0, 2, 1>> Allow null characters in "extra".
2009-11-20The R13B03 release.OTP_R13B03Erlang/OTP
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 18:48:49 +0000