aboutsummaryrefslogtreecommitdiffstats
path: root/erts/etc/common
AgeCommit message (Collapse)Author
2013-11-05Replace the +MMscmgc switch with +MMscrfsdRickard Green
Replaced the +MMscmgc switch with the +MMscrfsd switch. The old switch didn't reflect what it controlled.
2013-11-05Add switch for disabling sys_alloc carriersRickard Green
The switch "+Musac <boolean>" controls if sys_alloc carriers are allowed.
2013-11-05Add support for locking mappings to physical memoryRickard Green
Using "+Mlpm all" switch all mappings made by the emulator will be locked into physical memory.
2013-09-30erts: erts_mmap supercarrier management and erts_mseg usageRickard Green
* Coalescing and trimming of free segments in supercarrier * Management of super aligned and super unaligned areas in supercarrier * Management of reservation of physical memory * erts_mseg usage of erts_mmap
2013-09-30erts: Prepare erl_mmap with tree structures for free seg storageSverker Eriksson
2013-09-04+e should be passed through erlexecLukas Larsson
2013-08-29add erl option to set schedulers by percentagesSteve Vinoski
For applications where measurements show enhanced performance from the use of a non-default number of emulator scheduler threads, having to accurately set the right number of scheduler threads across multiple hosts each with different numbers of logical processors is difficult because the erl +S option requires absolute numbers of scheduler threads and scheduler threads online to be specified. To address this issue, add a +SP option to erl, similar to the existing +S option but allowing the number of scheduler threads and scheduler threads online to be set as percentages of logical processors configured and logical processors available, respectively. For example, "+SP 50:25" sets the number of scheduler threads to 50% of the logical processors configured, and the number of scheduler threads online to 25% of the logical processors available. The +SP option also interacts with any settings specified with the +S option, such that the combination of options "+S 4:4 +SP 50:50" (in either order) results in 2 scheduler threads and 2 scheduler threads online. Add documentation for the +SP option. Add tests for the +SP option to scheduler_SUITE. Add tests and documentation for two existing features of the +S option: +S 0:0 resets the scheduler thread count and scheduler threads online count to their defaults, and specifying negative numbers for +S results in those values being subtracted from the default values for the host.
2013-06-11erts: Add the +sfwi system flagRickard Green
+sfwi Interval Set scheduler forced wakeup interval. All run queues will be scanned each Interval milliseconds. While there are sleeping schedulers in the system, one scheduler will be woken for each non-empty run queue found. An Interval of zero disables this feature, which also is the default. This feature has been introduced as a temporary workaround for lengthy executing native code, and native code that do not bump reductions properly in OTP. When these bugs have be fixed the +sfwi flag will be removed.
2013-06-04erts: Use carrier pool for migration of carriersRickard Green
2013-06-03erts: Remove SBMBC allocatorSverker Eriksson
2013-04-05Merge branch 'maint-r16' into maintPatrik Nyblom
Conflicts: erts/vsn.mk
2013-04-03Be less eager requesting wakeup for cleanup jobsRickard Green
2013-03-31ct_run: delete unused functionTuncer Ayaz
2013-02-22Update copyright yearsBjörn-Egil Dahlberg
2013-02-22Merge branch 'lukas/common_test/remove_deprecated_run_test/OTP-9052'Lukas Larsson
* lukas/common_test/remove_deprecated_run_test/OTP-9052: Remove the deprecated run_test start program OTP-10881
2013-02-22Remove the deprecated run_test start programLukas Larsson
It was replaced by ct_run in R14B.
2013-02-18Remove newly introduced warning in erlexec.cPatrik Nyblom
2013-02-18Add +pc {latin1|unicode} switch and io:printable_range/0Patrik Nyblom
This is the base for implementing configurable ~tp printouts, so that the user can define which characters to view as actually printable in the shell and by io_lib:format. The functionality is neither documented nor used in this commit
2013-01-28Merge branch 'rickard/async-default/OTP-10736'Rickard Green
* rickard/async-default/OTP-10736: Use no async threads for erlc
2013-01-25Merge branch 'pan/fix-compiler-warnings-clang-and-new-gcc'Patrik Nyblom
* pan/fix-compiler-warnings-clang-and-new-gcc: Fix compiler warnings from GCC 4.7.1 on ARCH Linux Fix clang compiler warnings on FreeBSD in erts
2013-01-25Update copyright yearsBjörn-Egil Dahlberg
2013-01-25Use no async threads for erlcRickard Green
2013-01-23Fix clang compiler warnings on FreeBSD in ertsPatrik Nyblom
The following are deliberately left, as I have only a list of compiler warnings and no system to test on: hipe/hipe_x86_signal.c:264:5: warning: no previous prototype for function '_sigaction' [-Wmissing-prototypes] int __SIGACTION(int signum, const struct sigaction *act, struct sigaction *oldact) ^ hipe/hipe_x86_signal.c:222:21: note: expanded from macro '__SIGACTION' ^ 1 warning generated. sys/unix/sys_float.c:835:16: warning: declaration of 'struct exception' will not be visible outside of this function [-Wvisibility] matherr(struct exception *exc) ^ sys/unix/sys_float.c:835:1: warning: no previous prototype for function 'matherr' [-Wmissing-prototypes] matherr(struct exception *exc) ^ 2 warnings generated. drivers/unix/unix_efile.c:1504:11: warning: implicit declaration of function 'sendfile' [-Wimplicit-function-declaration] retval = sendfile(in_fd, out_fd, *offset, SENDFILE_CHUNK_SIZE, ^ 1 warning generated.
2013-01-23Merge branch 'rickard/+stbt/OTP-10668'Rickard Green
* rickard/+stbt/OTP-10668: Add +stbt erl command line switch
2013-01-18Merge branch 'nox/enable-silent-rules/OTP-10726'Björn-Egil Dahlberg
* nox/enable-silent-rules/OTP-10726: Implement ./otp_build configure --enable-silent-rules
2013-01-15Implement ./otp_build configure --enable-silent-rulesAnthony Ramine
With silent rules, the output of make is less verbose and compilation warnings are easier to spot. Silent rules are disabled by default and can be disabled or enabled at will by make V=0 and make V=1.
2013-01-08Add +stbt erl command line switchRickard Green
2013-01-08escript to accept emulator arguments when script file has no shebangMagnus Henoch
According to the documentation, if the second or third line in a script starts with %%!, then escript will use the rest of the line as emulator options. However, previously this was only the case if the first line started with #!. This change removes that check, and unconditionally uses the %%! line if present.
2012-12-07Merge branch 'rickard/port-optimizations/OTP-10336' into ↵Rickard Green
rickard/r16/port-optimizations/OTP-10336 * rickard/port-optimizations/OTP-10336: Change annotate level for emacs-22 in cerl Update etp-commands Add documentation on communication in Erlang Add support for busy port message queue Add driver callback epilogue Implement true asynchronous signaling between processes and ports Add erl_drv_[send|output]_term Move busy port flag Use rwlock for driver list Optimize management of port tasks Improve configuration of process and port tables Remove R9 compatibility features Use ptab functionality also for ports Prepare for use of ptab functionality also for ports Atomic port state Generalize process table implementation Implement functionality for delaying thread progress from unmanaged threads Conflicts: erts/doc/src/erl_driver.xml erts/doc/src/erlang.xml erts/emulator/beam/beam_bif_load.c erts/emulator/beam/beam_bp.c erts/emulator/beam/beam_emu.c erts/emulator/beam/bif.c erts/emulator/beam/copy.c erts/emulator/beam/erl_alloc.c erts/emulator/beam/erl_alloc.types erts/emulator/beam/erl_bif_info.c erts/emulator/beam/erl_bif_port.c erts/emulator/beam/erl_bif_trace.c erts/emulator/beam/erl_init.c erts/emulator/beam/erl_message.c erts/emulator/beam/erl_port_task.c erts/emulator/beam/erl_process.c erts/emulator/beam/erl_process.h erts/emulator/beam/erl_process_lock.c erts/emulator/beam/erl_trace.c erts/emulator/beam/export.h erts/emulator/beam/global.h erts/emulator/beam/io.c erts/emulator/sys/unix/sys.c erts/emulator/sys/vxworks/sys.c erts/emulator/test/port_SUITE.erl erts/etc/unix/cerl.src erts/preloaded/ebin/erlang.beam erts/preloaded/ebin/prim_inet.beam erts/preloaded/src/prim_inet.erl lib/hipe/cerl/erl_bif_types.erl lib/kernel/doc/src/inet.xml lib/kernel/src/inet.erl
2012-12-07Implement true asynchronous signaling between processes and portsRickard Green
2012-12-03Improve configuration of process and port tablesRickard Green
2012-10-24Merge branch 'maint'Björn-Egil Dahlberg
Conflicts: erts/etc/common/heart.c
2012-10-16erts: Change ERL_CRASH_DUMP_SECONDS behaviourBjörn-Egil Dahlberg
Not setting ERL_CRASH_DUMP_SECONDS will now terminate beam immediately on a crash without writing a crash dump file. Setting ERL_CRASH_DUMP_SECONDS to 0 will also terminate beam immediately on a crash without writing a crash dump file, i.e. same as not setting ERL_CRASH_DUMP_SECONDS environment variable. Setting ERL_CRASH_DUMP_SECONDS to a negative value will let the beam wait indefinitely on the crash dump file being written. Setting ERL_CRASH_DUMP_SECONDS to a positive value will let the beam wait that many seconds on the crash dump file being written. A positive value will set both an alarm in beam AND a heart timeout for restart if heart is running. This is due to the change of 'heart' behavior when 'heart' is listening for a crash.
2012-10-15heart: Refactor heart debuggingBjörn-Egil Dahlberg
2012-10-15erts, heart: Ensure erl_crash.dump is writtenBjörn-Egil Dahlberg
When a crash dump is about to be written and we have heartbeat enabled on a system. We need time to write it before heart explicitly kills the beam.
2012-09-28Make cerl -valgrind work with quoted spaces in command lineSverker Eriksson
2012-09-07Replace sprintf with erts_snprintf in inet_gethostBjörn-Egil Dahlberg
2012-08-31Merge branch 'maint'Björn-Egil Dahlberg
Conflicts: lib/diameter/autoconf/vxworks/sed.general xcomp/README.md
2012-08-31Update copyright yearsBjörn-Egil Dahlberg
2012-08-24Merge branch 'maint'Fredrik Gustafsson
* maint: Fix the erlc -MP flag
2012-08-24Merge branch 'rc/fix-MP-compiler-flag/OTP-10211' into maintFredrik Gustafsson
2012-08-20Merge branch 'maint'Patrik Nyblom
Conflicts: erts/doc/src/erlang.xml erts/preloaded/ebin/init.beam lib/kernel/doc/src/os.xml lib/stdlib/test/filename_SUITE.erl
2012-08-20Merge branch 'pan/unicode_home/OTP-10160' into maintPatrik Nyblom
* pan/unicode_home/OTP-10160: Teach release_handler_SUITE about file:native_name_encoding/0 Add documetation about Unicode in environment Make get/putenv and erlexec understand Unicode
2012-08-20Merge branch 'maint'Patrik Nyblom
Conflicts: erts/etc/common/heart.c
2012-08-20Merge branch 'pan/heart_and_times/OTP-10111' into maintPatrik Nyblom
* pan/heart_and_times/OTP-10111: Make heart use clock_gettime when available
2012-08-14Make get/putenv and erlexec understand UnicodePatrik Nyblom
Putenv and getenv needs to convert to the proper environment strings in Unicode depending on platform and user settings for filename encoding. Also erlexec needs to pass environment strings in an appropriate way for kernel to pick up. All environment strings on the command line, as well as home directory, is now passed in UTF8 on windows and in whatever encoding you have on Unix, kernel tries to convert all parameters and environments from UTF8 before making strings.
2012-07-19erts: Remove VxWorks from heart and etc filesBjörn-Egil Dahlberg
2012-07-10Fix the erlc -MP flagRichard Carlsson
Because of a copy-and-paste error in erlc.c, the -MP flag had the same effect as -MG. As a workaround, you had to pass +makedep_phony to enable the MP option. This patch makes -MP work as intended.
2012-06-13Make heart use clock_gettime when availablePatrik Nyblom
2012-06-08Merge branch 'lukas/otp/install_with_whitespace/OTP-10107' into maintLukas Larsson
* lukas/otp/install_with_whitespace/OTP-10107: Update to work with space in include path Update to work with whitespace in exec path