| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
* maint:
Implement a tab for persistent terms in crashdump viewer
Add tests of persistent terms for crashdump_viewer
Add a persistent term storage
Refactor releasing of literals
Extend the sharing-preserving routines to optionally copy literals
Conflicts:
erts/emulator/Makefile.in
erts/emulator/beam/erl_process_dump.c
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/init.beam
lib/sasl/src/systools_make.erl
|
|
Persistent terms are useful for storing Erlang terms that are never
or infrequently updated. They have the following advantages:
* Constant time access. A persistent term is not copied when it is
looked up. The constant factor is lower than for ETS, and no locks
are taken when looking up a term.
* Persistent terms are not copied in garbage collections.
* There is only ever one copy of a persistent term (until it is
deleted). That makes them useful for storing configuration data
that needs to be easily accessible by all processes.
Persistent terms have the following drawbacks:
* Updates are expensive. The hash table holding the keys for the
persistent terms are updated whenever a persistent term is added,
updated or deleted.
* Updating or deleting a persistent term triggers a "global GC", which
will schedule a heap scan of all processes to search the heap of all
processes for the deleted term. If a process still holds a reference
to the deleted term, the process will be garbage collected and the
term copied to the heap of the process. This global GC can make the
system less responsive for some time.
Three BIFs (implemented in C in the emulator) is the entire
interface to the persistent term functionality:
* put(Key, Value) to store a persistent term.
* get(Key) to look up a persistent term.
* erase(Key) to delete a persistent term.
There are also two additional BIFs to obtain information about
persistent terms:
* info() to return a map with information about persistent terms.
* get() to return a list of a {Key,Value} tuples for all persistent
terms. (The values are not copied.)
|
|
Conflicts:
erts/preloaded/ebin/prim_inet.beam
|
|
* raimo/tcp-close-while-send/maint/ERL-561/OTP-12242:
Write test case
Fix hanging gen_tcp send vs close race
Conflicts:
erts/preloaded/ebin/prim_inet.beam
|
|
While a gen_tcp send was in progress with filled buffers
and slow receiver a close (from another process) would place
the port in a half dead state so the port could not signal
back to send, that waited for confirmation.
The solution is to after some time (5 s) of waiting for
send confirmation set a monitor on the port, which detects
if the port becomes half dead due to close from another process.
The close pending loop has also been improved to use the linger
timeout for waiting, and to set a system timeout (arbitrarily
selected 3 min) to not wait forever when the other end
reads data s l o w l y (tarpitting, kind of).
|
|
* maint:
"cork" tcp socket around file:sendfile
Add nopush TCP socket option
|
|
* igor/tcp-nopush-ERL-698/OTP-15357:
"cork" tcp socket around file:sendfile
Add nopush TCP socket option
|
|
Conflicts:
erts/preloaded/ebin/prim_inet.beam
|
|
Also implement the same option for the legacy undocumented functions
inet:getif/1,getiflist/1,ifget/2,ifset/2.
The arity 1 functions had before this change got signatures that
took a socket port that was used to do the needed syscall, so now
the signature was extended to also take an option list with the
only supported option {netns,Namespace}. The Socket argument
variant remains unsupported.
For inet:getifaddrs/1 the documentation file was changed to old
style function name definition so be able to hide the Socket
argument variant that is visible in the type spec.
The arity 2 functions had got an option list as second argument.
This list had to be partitioned into one list for the namespace
option(s) and the other for the rest.
The namespace option list was then fed to the already existing
namespace support for socket opening, which places the socket
in a namespace and hence made all these functions that in
inet_drv.c used getsockopt() work without change.
The functions that used getifaddrs() in inet_drv.c had to be
changed in inet_drv.c to swap namespaces around the
getifaddrs() syscall. This functionality was separated into
a new function call_getifaddrs().
|
|
* richcarl/erts/erl_init-cleanup/OTP-15336:
sasl: Order systools_make:preloaded modules alphabetically
Update preloaded modules
Move calling on_load for preloaded modules to erl_init
Make erl_init.c pass the boot module to erl_init.beam
Remove obsolete comment text
Remove undocumented and unused -# display_items emulator option
Remove broken and undocumented boot function emulator option
Replace remaining references to otp_ring0 with erl_init
Drop otp_ring0, using erl_init instead
Update preloaded modules
Add erl_init module
Conflicts:
erts/emulator/beam/erl_init.c
erts/preloaded/ebin/erl_prim_loader.beam
erts/preloaded/ebin/erl_tracer.beam
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_code_purger.beam
erts/preloaded/ebin/erts_dirty_process_signal_handler.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/erts_literal_area_collector.beam
erts/preloaded/ebin/init.beam
erts/preloaded/ebin/otp_ring0.beam
erts/preloaded/ebin/prim_buffer.beam
erts/preloaded/ebin/prim_eval.beam
erts/preloaded/ebin/prim_file.beam
erts/preloaded/ebin/prim_inet.beam
erts/preloaded/ebin/prim_zip.beam
erts/preloaded/ebin/zlib.beam
|
|
|
|
* raimo/receive-TOS-TCLASS/ERIERL-187/OTP-15145:
Write testcases for recvtos and friends
Fix term buffer overflow bug
Fix documentation due to feedback
Implement socket option recvtos and friends
|
|
* maint:
Improve trapping in lists:reverse/2
Fix unsafe use of lists:reverse/1
|
|
We said reverse/2 but used reverse/1 which is unsafe to use in
preloaded modules. This didn't have any effect in practice as the
affected functions weren't used before the code server was started,
but it's still an error.
|
|
Implement socket options recvtclass, recvtos, recvttl and pktoptions.
Document the implemented socket options, new types and message formats.
The options recvtclass, recvtos and recvttl are boolean options that
when activated (true) for a socket will cause ancillary data to be
received through recvmsg(). That is for packet oriented sockets
(UDP and SCTP).
The required options for this feature were recvtclass and recvtos,
and recvttl was only added to test that the ancillary data parsing
handled multiple data items in one message correctly.
These options does not work on Windows since ancillary data
is not handled by the Winsock2 API.
For stream sockets (TCP) there is no clear connection between
a received packet and what is returned when reading data from
the socket, so recvmsg() is not useful. It is possible to get
the same ancillary data through a getsockopt() call with
the IPv6 socket option IPV6_PKTOPTIONS, on Linux named
IPV6_2292PKTOPTIONS after the now obsoleted RFC where it originated.
(unfortunately RFC 3542 that obsoletes it explicitly undefines
this way to get packet ancillary data from a stream socket)
Linux also has got a way to get packet ancillary data for IPv4
TCP sockets through a getsockopt() call with IP_PKTOPTIONS,
which appears to be Linux specific.
This implementation uses a flag field in the inet_drv.c socket
internal data that records if any setsockopt() call with recvtclass,
recvtos or recvttl (IPV6_RECVTCLASS, IP_RECVTOS or IP_RECVTTL)
has been activated. If so recvmsg() is used instead of recvfrom().
Ancillary data is delivered to the application by a new return
tuple format from gen_udp:recv/2,3 containing a list of
ancillary data tuples [{tclass,TCLASS} | {tos,TOS} | {ttl,TTL}],
as returned by recvmsg(). For a socket in active mode a new
message format, containing the ancillary data list, delivers
the data in the same way.
For gen_sctp the ancillary data is delivered in the same way,
except that the gen_sctp return tuple format already contained
an ancillary data list so there are just more possible elements
when using these socket options. Note that the active mode
message format has got an extra tuple level for the ancillary
data compared to what is now implemented gen_udp.
The gen_sctp active mode format was considered to be the odd one
- now all tuples containing ancillary data are flat,
except for gen_sctp active mode.
Note that testing has not shown that Linux SCTP sockets deliver
any ancillary data for these socket options, so it is probably
not implemented yet. Remains to be seen what FreeBSD does...
For gen_tcp inet:getopts([pktoptions]) will deliver the latest
received ancillary data for any activated socket option recvtclass,
recvtos or recvttl, on platforms where IP_PKTOPTIONS is defined
for an IPv4 socket, or where IPV6_PKTOPTIONS or IPV6_2292PKTOPTIONS
is defined for an IPv6 socket. It will be delivered as a
list of ancillary data items in the same way as for gen_udp
(and gen_sctp).
On some platforms, e.g the BSD:s, when you activate IP_RECVTOS
you get ancillary data tagged IP_RECVTOS with the TOS value,
but on Linux you get ancillary data tagged IP_TOS with the
TOS value. Linux follows the style of RFC 2292, and the BSD:s
use an older notion. For RFC 2292 that defines the IP_PKTOPTIONS
socket option it is more logical to tag the items with the
tag that is the item's, than with the tag that defines that you
want the item. Therefore this implementation translates all
BSD style ancillary data tags to the corresponding Linux style
data tags, so the application will only see the tags 'tclass',
'tos' and 'ttl' on all platforms.
|
|
|
|
|
|
|
|
|
|
* sverker/erlang-memory-fix:
erts: Purge unused allocation types
erts: Fix erlang:memory for 'processes' and 'processes_used'
|
|
|
|
|
|
|
|
to include links and monitors which were lost at
4bc282d812cc2c49aa3e2d073e96c720f16aa270
where these fix_alloc types changed names.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Improve memory instrumentation
OTP-15024
OTP-14961
|
|
This commit replaces the old memory instrumentation with a new
implementation that scans carriers instead of wrapping
erts_alloc/erts_free. The old implementation could not extract
information without halting the emulator, had considerable runtime
overhead, and the memory maps it produced were noisy and lacked
critical information.
Since the new implementation walks through existing data structures
there's no longer a need to start the emulator with special flags to
get information about carrier utilization/fragmentation. Memory
fragmentation is also easier to diagnose as it's presented on a
per-carrier basis which eliminates the need to account for "holes"
between mmap segments.
To help track allocations, each allocation can now be tagged with
what it is and who allocated it at the cost of one extra word per
allocation. This is controlled on a per-allocator basis with the
+M<S>atags option, and is enabled by default for binary_alloc and
driver_alloc (which is also used by NIFs).
|
|
|
|
If messages are not flushed they would cause problems when
the system is booting. For instance module load requests
would be issued before the prim loader has been launched.
|
|
* rickard/signals/OTP-14589:
Fix VM probes compilation
Fix lock counting
Fix signal order for is_process_alive
Fix signal handling priority elevation
|
|
|
|
Implementation of true asynchronous signaling between processes
|
|
Communication between Erlang processes has conceptually always been
performed through asynchronous signaling. The runtime system
implementation has however previously preformed most operation
synchronously. In a system with only one true thread of execution, this
is not problematic (often the opposite). In a system with multiple threads
of execution (as current runtime system implementation with SMP support)
it becomes problematic. This since it often involves locking of structures
when updating them which in turn cause resource contention. Utilizing
true asynchronous communication often avoids these resource contention
issues.
The case that triggered this change was contention on the link lock due
to frequent updates of the monitor trees during communication with a
frequently used server. The signal order delivery guarantees of the
language makes it hard to change the implementation of only some signals
to use true asynchronous signaling. Therefore the implementations
of (almost) all signals have been changed.
Currently the following signals have been implemented as true
asynchronous signals:
- Message signals
- Exit signals
- Monitor signals
- Demonitor signals
- Monitor triggered signals (DOWN, CHANGE, etc)
- Link signals
- Unlink signals
- Group leader signals
All of the above already defined as asynchronous signals in the
language. The implementation of messages signals was quite
asynchronous to begin with, but had quite strict delivery constraints
due to the ordering guarantees of signals between a pair of processes.
The previously used message queue partitioned into two halves has been
replaced by a more general signal queue partitioned into three parts
that service all kinds of signals. More details regarding the signal
queue can be found in comments in the erl_proc_sig_queue.h file.
The monitor and link implementations have also been completely replaced
in order to fit the new asynchronous signaling implementation as good
as possible. More details regarding the new monitor and link
implementations can be found in the erl_monitor_link.h file.
|
|
It wasn't possible to change group/owner separately, and our test
suite lacked coverage for that.
ERL-589
|
|
to replace DFLAGS_STRICT_ORDER_DELIVERY
and remove that compile time dependency.
|
|
for kernel to ask erts about distribution flags
and keep this info in one place.
|
|
|
|
or backslash on Windows.
Purpose: Prevent tricks to get hostile code running.
|
|
into 'sverker/master/alloc-n-migration/ERIERL-88'
|
|
into 'sverker/maint-20/alloc-n-migration/ERIERL-88'
OTP-14915
OTP-14916
OTP-14917
OTP-14918
|
|
similar to the ones in OTP-19.2.3.1
|
|
* dgud/kernel/refc_sched_wall_time/OTP-11694:
test: spawn scheduler_wall_time flag holder
Turn on scheduler_wall_time in an alive process
Redirect system_flag(scheduler_wall_time,_) to kernel_refc
kernel: add a resource reference counter
|
