| Age | Commit message (Collapse) | Author |
|---|
|
into 'sverker/maint-19/alloc-n-migration/ERIERL-88'
|
|
to change sbct limit in runtime for chosen allocator type.
With great power comes great responsibility.
|
|
similar to the ones in OTP-19.2.3.1
|
|
|
|
|
|
def_arg_reg[0] is used for storage of timeout instruction
when a 'receive after' is executed. When a process was
scheduled out inside prim_eval:'receive'/0 due to a function
call, def_arg_reg[0] was overwritten due to storage of live
registers.
prim_eval:'receive'/2 now calls arg_reg_alloc/0 which
bumps all reductions and then calls arg_reg_alloc/7
which will cause an allocation of a new arg_reg array
since def_arg_reg only can hold 6 values. This ensures
that the timeout instruction in def_arg_reg[0] used
for the timeout wont be overwritten.
|
|
|
|
|
|
|
|
The erl_prim_loader:get_modules/{2,3} functions were introduced in
cd283583f8. Unfortunately, while the functions worked correctly, there
was a bug in that many garbage maessages would be sent to the
erl_prim_loader process. The number of extra messages depended on
both the length of the code path and of the number of modules that
were fetched. The messages were ignored and ultimately discarded,
causing no harm except for a performance degradation and increase of
the heap size for the erl_prim_loader process.
The following functions were hit by the performance bug:
code:atomic_load/1
code:ensure_modules_loaded/1
code:prepare_loading/1
|
|
|
|
Bug reported by Peti Gömöri <[email protected]>.
|
|
|
|
Strictly speaking 'true' and 'false' arguments is not necessary,
but it should work if supplied.
|
|
* raimo/diffserv-socket-option/OTP-13582:
Tune 'tclass' semantics
Implement IPV6_TCLASS
|
|
Normally, calling code:delete/1 before re-loading the code for a
module is unnecessary but causes no problem.
But there will be be problems if the new code has an on_load function.
Code with an on_load function will always be loaded as old code
to allowed it to be easily purged if the on_load function would fail.
If the on_load function succeeds, the old and current code will be
swapped.
So in the scenario where code:delete/1 has been called explicitly,
there is old code but no current code. Loading code with an
on_load function will cause the reference to the old code to be
overwritten. That will at best cause a memory leak, and at worst
an emulator crash (especially if NIFs are involved).
To avoid that situation, we will put the code with the on_load
function in a special, third slot in Module.
ERL-240
|
|
|
|
* rickard/time-unit/OTP-13735:
Update test-cases to use new symbolic time units
Replace misspelled symbolic time units
Conflicts:
erts/doc/src/erlang.xml
erts/emulator/test/long_timers_test.erl
|
|
* rickard/ds-purge-module/OTP-13808:
Perform check_process_code while process is executing dirty
Conflicts:
erts/doc/src/erl_nif.xml
|
|
'rickard/new-purge-strategy/OTP-13833' into maint
* rickard/fun-purge-bug/OTP-13809:
Fix purge of code
Reclaim literal area after purge has completed
Separate literal area from code
Conflicts:
erts/doc/src/erlang.xml
erts/emulator/beam/beam_bif_load.c
erts/emulator/beam/erl_init.c
erts/preloaded/ebin/init.beam
|
|
|
|
Ensure that we cannot get any dangling pointers into code that
has been purged. This is done by a two phase purge. At first
phase all fun entries pointing into the code to purge are marked
for purge. All processes trying to call these funs will be suspended
and by this we avoid getting new direct references into the code.
When all processes has been checked, these processes are resumed.
The new purge strategy now also completely ignore the existence of
indirect references to the code (funs). If such exist, they will
cause bad fun exceptions to the caller, but will not prevent a
soft purge or cause a kill of a process having such live references
during a hard purge. This since it is impossible to give any
guarantees that no processes in the system have such indirect
references. Even when the system is completely clean from such
references, new ones can appear via distribution and/or disk.
|
|
|
|
Besides using two words for 'milliseconds' et. al. they are
also changed from plural to singular.
|
|
* lukas/erts/fix_init_stop_code_load_race/OTP-13802:
erts/kernel: Fix code loading deadlock during init:stop
|
|
When init:stop is called it walks the application hierarchy
and terminates each process. Some of these processes may do
something while terminating and sometimes that something
needs to load some new code in order to work. When this happens
the code_server could just be in the process of terminating
or the erl_prim_loader could be active. In both these cases
the request to load the new code would cause a deadlock in the
termination of the system.
This commit fixes this by init rejecting attempts to load new code
when init:stop has been called and fixing a termination race in
the code_server.
This however means that the process that tried to do something
when told to terminate (for instance logging that it is terminating)
will crash instead of loading the code.
|
|
|
|
|
|
* kvakvs/erts/monitor_port/OTP-11384:
erts: Add port monitors
|
|
* erlang:monitor/2 with port argument is added, erlang:demonitor, using port task API and avoiding locking;
* port_info and process_info support for monitored ports (with named port monitors support);
* Exit signals contain type 'process' or 'port';
* Propagation of port exit signals;
* Self-cleaning when origin process dies with monitor on;
* 8 test cases + testcase for port driver crashing;
* Documentation for all of the above (monitor, demonitor, port_info and process_info) updated
|
|
|
|
|
|
* saleyn/uds/PR-612/OTP-13572:
AF_UNIX is more portable
|
|
Fix dialyzer warning for improper list in prim_inet
by not using an improper list.
|
|
* saleyn/uds/PR-612/OTP-13572:
Rewrite inet* for address family 'local'
Rewrite inet_drv for AF_LOCAL
Assign externally open fd to gen_tcp (UDS support)
Conflicts:
erts/preloaded/ebin/prim_inet.beam
lib/kernel/doc/src/gen_tcp.xml
lib/kernel/doc/src/gen_udp.xml
lib/kernel/src/inet6_sctp.erl
lib/kernel/test/inet_SUITE.erl
|
|
|
|
* rickard/rt-dep-erts-kernel-stdlib-sasl:
Bumped runtime dependencies between erts, kernel, stdlib, sasl
|
|
Removed in f9cb80861f169743 when changed impl from C to Erlang.
But seems they are needed to keep dialyzer tests happy.
Also improved bif_SUITE:shadow_comments to include all exported
in module erlang, not just the "snifs".
...which detected that apply/2 was missing Shadowed comment as well.
|
|
|
|
|
|
|
|
* rickard/rm-mqd-mixed/OTP-13366:
Remove the 'message_queue_data' option 'mixed'
|
|
|
|
|
|
as erlang:halt does it for us now
|
|
just to make things simpler.
|
|
The extra trace data has been moved to the opts map in order
for the tracer to be able to distinguish inbetween extra
trace data 'undefined' and no extra trace data. In the same
commit all opts associations have been changed so that if
the tracer should not use them, the key is left unassicated
instead of being sent to undefined. This should be give a
small performance gain and also makes the API easier to work
with.
|
|
|
|
A bad directory in the path would prevent the run-time system
from starting:
$ echo >foobar
$ erl -pa foobar
{"init terminating in do_boot",{load_failed,[supervisor,kernel,gen_server,file_io_server,filename,file,erl_parse,error_logger,code_server,erl_lint,proc_lib,code,application_controller,application_master,gen_event,application,error_handler,lists,heart,gen,file_server,ets,erl_eval]}}
Crash dump is being written to: erl_crash.dump...done
init terminating in do_boot ()
The reason is that when attempting to read each of the BEAM files,
there would be an 'enotdir' error which
erl_prim_load:get_modules/2,3 assumed was a fatal error.
Update erl_prim_load:get_modules/2,3 to ignore any error and try
the next directory in the path.
Reported-by: http://bugs.erlang.org/browse/ERL-142
Reported-by: Michael Truog
|
|
* lukas/trace-fix:
erts: Only allow remove from trace_status callback
|
