| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
On e.g FreeBSD the functions sctp_bindx() and sctp_peeloff() do not require
any extra linkage library flags and there is no dynamic lib to load
for them; use configure to find them.
|
|
Receive several fragments within the same receive loop if possible.
|
|
|
|
|
|
|
|
|
|
* bjorn/erts/erlc-do-not-bind:
erlc: Do not bind schedulers when invoking "erl"
|
|
If parallel make is used, several instance of 'erlc' is likely to
be invoked at once. Therefore, the default binding of schedulers
to CPU cores will do no good. (With this change, the build of
Erlang/OTP with six threads finished in about 7 minutes; without in
about 11 minutes.)
|
|
* egil/reallocating-catches/OTP-9692:
erts: Teach VM to reallocate beam catch table
|
|
* rickard/bad-rwmtx-assert:
Fix bad assertion in rwmtx implementation
|
|
* rickard/multi-exit-bug/OTP-9705:
Make sure only one thread exits the runtime system
|
|
* rickard/win-cs-mutex/OTP-9671:
Use critical sections as mutex implementation on Windows
|
|
* rickard/generic-thr-queue/OTP-9632:
Use generic lock-free queue for async threads
Use generic lock-free queue for misc aux work
Implement generic lock-free queue
|
|
* rickard/thr-progress-block/OTP-9631:
Replace system block with thread progress block
|
|
* rickard/alloc-opt/OTP-7775:
Optimize memory allocation
Conflicts:
erts/aclocal.m4
erts/emulator/hipe/hipe_bif_list.m4
erts/preloaded/ebin/erl_prim_loader.beam
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/init.beam
erts/preloaded/ebin/otp_ring0.beam
erts/preloaded/ebin/prim_file.beam
erts/preloaded/ebin/prim_inet.beam
erts/preloaded/ebin/prim_zip.beam
erts/preloaded/ebin/zlib.beam
|
|
The runtime system crashed if more than one thread tried to exit
the runtime system at the same time.
|
|
Windows native critical sections are now used internally in the
runtime system as mutex implementation. This since they perform
better under extreme contention than our own implementation.
|
|
Queues used for communication between async threads and scheduler threads
have been replaced with lock-free queues.
Drivers using the driver_async functionality are not automatically locked
to the system anymore, and can be unloaded as any dynamically linked in
driver.
Scheduling of ready async jobs is now also interleaved in between other
jobs. Previously all ready async jobs was performed at once.
|
|
|
|
The implementation of an ERTS internal, generic, many to one, lock-free
queue for communication between threads. The many to one scenario is
very common in ERTS, so it can be used in a lot of places in the future.
Changing to this queue from a lock based queue, however, often requires
some redesigning. This since we have often used the lock of the queue
to protect other information too.
|
|
The ERTS internal system block functionality has been replaced by
new functionality for blocking the system. The old system block
functionality had contention issues and complexity issues. The
new functionality piggy-backs on thread progress tracking functionality
needed by newly introduced lock-free synchronization in the runtime
system. When the functionality for blocking the system isn't used
there is more or less no overhead at all. This since the functionality
for tracking thread progress is there and needed anyway.
|
|
A number of memory allocation optimizations have been implemented. Most
optimizations reduce contention caused by synchronization between
threads during allocation and deallocation of memory. Most notably:
* Synchronization of memory management in scheduler specific allocator
instances has been rewritten to use lock-free synchronization.
* Synchronization of memory management in scheduler specific
pre-allocators has been rewritten to use lock-free synchronization.
* The 'mseg_alloc' memory segment allocator now use scheduler specific
instances instead of one instance. Apart from reducing contention
this also ensures that memory allocators always create memory
segments on the local NUMA node on a NUMA system.
|
|
|
|
Previously this table were statically allocated to 16*1024 entries.
Now the default size is 1024 entries but that is doubled each time
the limit is reached.
Theoretical upper limit is 2^26 entries (the remaining bits on a
catch datatype) in a 32 bit system.
|
|
* rj/fix-remove-exec-bit:
Remove exec bit from files: info files, dat, bat
Remove exec bit from files related to: XML, make, C
Remove exec bit from: erl, hrl, xml, html, asn, gif, xpm
OTP-9698
|
|
* rj/fix-erlang-doc-style:
Fixes module erlang doc style: option description
OTP-9697
|
|
|
|
|
|
* sverk/bif-args/OTP-9662:
erts,hipe: Limited support for hipe cross compilation
erts-hipe: Change THE_NON_VALUE for HiPE enabled debug emulator
erts-hipe: Enable debug compiled hipe-VM with lock checker
erts-hipe: Rename fail_bif_interface_0 to standard_bif_interface_0
erts-hipe: Deliberate leak of native fun entries
erts-hipe: Fix new trap conventions for x86, amd64 and ppc
Store the trap address in p->i
Store the trap arguments in the X register array
erts-hipe: Make some primops use new BIF calling convention
erts-hipe: Adapt generated BIF wrappers for new calling convention
erts-hipe: Remove obscuring macros in generated assembler code
erts-hipe: Make hipe enabled emulator compile with new BIF calls
Simplify the instructions for calling BIFs
Change the calling convention for BIFs
Use the proper macros in all BIFs
Conflicts:
erts/emulator/beam/bif.h
erts/emulator/beam/erl_bif_info.c
|
|
Normally hipe assumes that generated native code will be executed
on the same emulator as the hipe compiler is running on.
This commit allows you to build a hipe "cross-compiler"
for a different configured emulator (but for same architecture).
Example:
> cd lib/hipe
> make clean
> make XCOMP=yes FLAVOR=smp TYPE=debug
This hipe compiler will generate code to be executed
on the debug compiled smp-emulator at $ERL_TOP.
|
|
* sverk/enif_inspect-memleak/OTP-9668:
erts: Fix memory leak of enif_inspect_* on independent environment
|
|
* bjorn/create-less-garbage:
Optimize filename:basename/1 to produce less garbage
Optimize filename:extension/1 to produce less garbage
sys.c for Unix: Undo caching of utsname in os_flavor()
Pre-build the tuples returned by os:type/0 and os:version/0
|
|
* egil/fix-compiler-warnings:
erts: Remove unused variable in enif_make_binary
erts: Remove debug variable in list_to_binary
erts: Remove cp on exiting and trapping processes
erts: Remove debug variables in erl_db
erts: Remove dead code in efile_drv
erts: Remove lock_check debug variables
erts: Remove unused variable in ttsl_drv
erts: "initialized" is only used with CHLDWTHR
erts: remove debug variables in beam_bp
|
|
OTP-9675
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* bjorn/fun-improvements/OTP-9667:
sys_pre_expand: Remove incorrect comment
compiler: Eliminate use of deprecated erlang:hash/2
beam_asm: Fix broken NewIndex in fun entries
beam_asm: Strenghten the calculation of Uniq for funs
|
|
Funs are identified by a triple, <Module,Uniq,Index>, where Module is
the module name, Uniq is a 27 bit hash value of some intermediate
representation of the code for the fun, and index is a small integer.
When a fun is loaded, the triple for the fun will be compared to
previously loaded funs. If all elements in the triple in the newly
loaded fun are the same, the newly loaded fun will replace the previous
fun. The idea is that if Uniq are the same, the code for the fun is also
the same.
The problem is that Uniq is only based on the intermediate representation
of the fun itself. If the fun calls local functions in the same module,
Uniq may remain the same even if the behavior of the fun has been changed.
See
http://erlang.org/pipermail/erlang-bugs/2007-June/000368.htlm
for an example.
As a long-term plan to fix this problem, the NewIndex and NewUniq
fields was added to each fun in the R8 release (where NewUniq is the
MD5 of the BEAM code for the module). Unfortunately, it turns
out that the compiler does not assign unique value to NewIndex (if it
isn't tested, it doesn't work), so we cannot use the
<Module,NewUniq,NewIndex> triple as identification.
It would be possible to use <Module,NewUniq,Index>, but that seems
ugly. Therefore, fix the problem by making Uniq more unique by
taking 27 bits from the MD5 for the BEAM code. That only requires
a change to the compiler.
Also update a test case for cover, which now fails because of the
stronger Uniq calculation. (The comment in test case about why the
Pid2 process survived is not correct.)
|
|
Currently, the external fun syntax "fun M:F/A" only supports
literals. That is, "fun lists:reverse/1" is allowed but not
"fun M:F/A".
In many real-life situations, some or all of M, F, A are
not known until run-time, and one is forced to either use
the undocumented erlang:make_fun/3 BIF or to use a
"tuple fun" (which is deprecated).
EEP-23 suggests that the parser (erl_parse) should immediately
transform "fun M:F/A" to "erlang:make_fun(M, F, A)". We have
not followed that approach in this implementation, because we
want the abstract code to mirror the source code as closely
as possible, and we also consider erlang:make_fun/3 to
be an implementation detail that we might want to remove in
the future.
Instead, we will change the abstract format for "fun M:F/A" (in a way
that is not backwards compatible), and while we are at it, we will
move the translation from "fun M:F/A" to "erlang:make_fun(M, F, A)"
from sys_pre_expand down to the v3_core pass. We will also update
the debugger and xref to use the new format.
We did consider making the abstract format backward compatible if
no variables were used in the fun, but decided against it. Keeping
it backward compatible would mean that there would be different
abstract formats for the no-variable and variable case, and tools
would have to handle both formats, probably forever.
Reference: http://www.erlang.org/eeps/eep-0023.html
|
|
A future release of the compiler might want to treat external
funs as literals. Make sure that the loader can cope with an
export entry being created from both an entry in the literal
pool and from the export table (i.e. if an external fun refers
to an exported function in the same module).
|
|
Make it clear for the user what has happened and how to fix it when
an attempt is made to load a BEAM file containing new instructions
that the current run-time system cannot handle.
Suggested-by: Thomas Lindgren
|
