| Age | Commit message (Collapse) | Author |
|---|
|
Since 'd' operands can only either an X register or an Y register,
we only need a single bit to distinguish them. Furthermore, we can
pre-multiply the register number with the word size to speed up
address calculation.
|
|
Sequences of three move instructionst that effectively swap the
contents of two registers are fairly common. We can replace them
with a swap_temp/3 instruction. The third operand is the temporary
register to be used for swapping, since the temporary register
may actually be used.
If swap_temp/3 instruction is followed by a call, the temporary
register will often (but not always) be killed by the call. If
it is killed, we can replace the swap_temp/3 instruction with a
slightly cheaper swap/2 instruction.
|
|
Currently, move2/2 does the two moves sequentially to ensure
that the instruction will always work correctly.
We can do better than that. If the two move instructions have
any registers in common, we can introduce simpler and slightly
more efficient instructions to handle those cases:
move_shift/3
move_dup/3
For the remaining cases when the the move instructions
have no common registers, the move2/4 instruction can perform
the moves in parallel which is probably slightly more efficient.
For clarity's sake, we will remain the instruction to move2_par/4.
|
|
|
|
The 'cmd' variable that were shared by several hipe_mode_switch
instructions would cause clang to produce sub-optimal code,
probably because it considered the instructions as part of of
loop that needed to be optimized.
What would was that 'cmd' would be assigned to the ESI register
(lower 32 bits of the RSI register). It would use ESI for other
purposes in instructions, but at the end of every instruction
it would set ESI to 1 just in case the next instruction happened
to be hipe_trap_return. This can be seen clearly if this commit
is omitted and the define HIPE_MODE_SWITCH_CMD_RETURN in
hipe/hipe_mode_switch.h is changed from 1 to some other number
such as 42. You will see that 42 is assigned to ESI at the end
of every instruction.
Eliminate this problem by elimininating the shared 'cmd' variable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The i_fetch instruction fetches two operands and places them
in the tmp_arg1 and tmp_arg2 variables. The next instruction
(such as i_plus) does not have to handle different types of
operands, but can get get them simply from the tmp_arg*
variables. Thus, i_fetch was introduced as a way to temper
a potentail combinatorial explosion.
Unfortunately, clang will generate terrible code because of
the tmp_arg1 and tmp_arg2 variables being live across multiple
instructions. Note that Clang has no way to predict the control
flow from one instruction to another. Clang must assume that
any instruction can jump to any other instruction. Somehow GCC
manages to cope with this situation much better.
Therefore, to improve the quality of the code generated by clang, we
must eliminate all uses of the tmp_arg1 and tmp_arg2 variables. This
commit eliminates the use of i_fetch in combination with the
arithmetic and logical instructions.
While we are touching the code for the bsr and bsl instructions,
also move the tmp_big[] array from top scope of process main into
the block that encloses the bsr and bsl instructions.
|
|
The 'r' type is now mandatory. That means in order to handle
both of the following instructions:
move x(0) y(7)
move x(1) y(7)
we would need to define two specific operations in ops.tab:
move r y
move x y
We want to make 'r' operands optional. That is, if we have
only this specific instruction:
move x y
it will match both of the following instructions:
move x(0) y(7)
move x(1) y(7)
Make 'r' optional allows us to save code space when we don't
want to make handling of x(0) a special case, but we can still
use 'r' to optimize commonly used instructions.
|
|
Consider the try_case_end instruction:
try_case_end s
The 's' operand type means that the operand can either be a
literal of one of the types atom, integer, or empty list, or
a register. That worked well before R12. In R12 additional
types of literals where introduced. Because of way the
overloading was done, an 's' operand cannot handle the
new types of literals. Therefore, code such as the following
is necessary in ops.tab to avoid giving an 's' operand a
literal:
try_case_end Literal=q => move Literal x | try_case_end x
While this work, it is error-prone in that it is easy to
forget to add that kind of rule. It would also be complicated
in case we wanted to introduce a new kind of addition operator
such as:
i_plus jssd
Since there are two 's' operands, two scratch registers and
two 'move' instructions would be needed.
Therefore, we'll need to find a smarter way to find tag
register operands. We will overload the pid and port tags
for X and Y register, respectively. That works because pids
and port are immediate values (fit in one word), and there
are no literals for pids and ports.
|
|
|
|
As part of improving code generation for clang, we want to
eliminate the special variable that stores the content of X
register zero most of the time. In a future, that will allow us
to eliminate the special case of handling r(0) for most
instructions, thus reducing the code size and allow other
simplifcations.
Therefore, in this commit, eliminate the variable that is used
to store r(0) and make r(0) as synonym for x(0). I have chosen
to keep the r(0) define to keep the size of the diff managable.
|
|
The purpose of this series of commits is to improve code generation
for the Clang compiler.
As a first step we want to change the meaning of 'x' in a
transformation such as:
operation Literal=q => move Literal x | operation x
Currently, a plain 'x' means reg[0] or x(0), which is the first
element in the X register array. That element is distinct from
r(0) which is a variable in process_main(). Therefore, since r(0)
and x(0) are currently distinct it is fine to use x(0) as a
scratch register.
However, in the next commit we will eliminate the separate variable
for storing the contents of X register zero (thus, x(0) and r(0)
will point to the same location in the X register array). Therefore,
we must use another scratch register in transformation. Redefine
a plain 'x' in a transformation to mean x(1023). Also define
SCRATCH_X_REG so that we can refer to the register by name from
C code.
|
|
|
|
Consider an hypothetical instruction:
do_something x x c
The loader would crash if we tried to load an instance of the
instruction with the last operand referencing a literal:
{do_something,{x,0},{x,1},{literal,{a,b,c}}}
Teach beam_makeops to turn off packing for such unsafe instructions.
|
|
* maint:
Add a smoke test of erts_debug:df/1
Correct disassembly of the i_get_map_elements instruction
|
|
* bjorn/erts/beam_debug:
Add a smoke test of erts_debug:df/1
Correct disassembly of the i_get_map_elements instruction
|
|
|
|
|
|
Run erts_debug:df/1 for all loaded modules. On my reasonably fast,
modern computer this test case runs in approximately 10 seconds.
To avoid spending many minutes running this test case on older
computers, limit the running time to 20 seconds.
While we are at it, remove all ?line macros.
|
|
The emulator would crash.
|
|
|
|
* egil/remove-halfword/OTP-12883: (21 commits)
erts: Remove halfword etp-commands
erts: Remove halfword MemKind mseg
erts: Remove halfword bases in ETS
erts: Remove halfword CHECK_POINTER_MASK
erts: Remove halfword relative printf
erts: Remove halfword valgrind suppress file
erts: Remove halfword specific tests
erts: Remove halfword specific allocator types
erts: Remove halfword BINARY RELs
erts: Remove halfword is_same bases macro
erts: Reinstate copy_object over-allocation optimization
erts: Remove halfword copy_object_rel
erts: Remove halfword object manipulation
erts: Remove halfword heap relative comparisions
erts: Remove halfword pointer compression
erts: Remove halfword basic relative heap operations
erts: Remove halfword from configure
erts: Remove halfword in lib_src
erts: Remove halfword in erl_nif.h
erts: Remove halfword in erl_driver.h
...
|
|
|
|
* sverk/ets-unfix-delete-race/OTP-12870:
erts: Fix ETS race between object deleter and table unfixer
|
|
|
|
* sverk/map-merge-trap:
erts: Expand test map_SUITE:t_bif_merge_and_check
|
|
Conflicts:
OTP_VERSION
|
|
|
|
* sverk/poll-lost-wakeup/OTP-12859:
erts: Fix race in poller thread wake up
|
|
Conflicts:
OTP_VERSION
erts/doc/src/notes.xml
erts/vsn.mk
otp_versions.table
|
|
causing the delete marked object to be left in the table
after safe_fixtable(_,false) has returned.
This is not super serious as the delete marked object
is quite benign and will be deleted at the next unfix operation.
|
|
|
|
* sverk/poll-lost-wakeup/OTP-12859:
erts: Fix race in poller thread wake up
|
|
* egil/fix-purge-literals/OTP-12821:
erts: Fix garbage collect literals in code purge
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* ERTS_GET_BINARY_BYTES_REL
* ERTS_GET_REAL_BIN_REL
|
|
Keep is_same macro for readability but remove base pointers.
|
|
|
