| Age | Commit message (Collapse) | Author |
|---|
|
This commit is a preparation for introducing location information
(filename/line number) in stacktraces in exceptions. Currently
a stack trace looks like:
[{Mod1,Function1,Arity1},
.
.
.
{ModN,FunctionN,ArityN}]
Add a forth element to each tuple that can be used indication
the filename and line number of the source file:
[{Mod1,Function1,Arity1,Location1},
.
.
.
{ModN,FunctionN,ArityN,LocationN}]
In this commit, the fourth element will just be an empty list,
and we will change all code that look at or manipulate stacktraces.
|
|
|
|
|
|
|
|
|
|
Since the introduction of improved record optimizations in
1858cb81391d2bce29b4b7620574ca60128cebf7 and
470c91d43eae54f63661645acbce4b92d73287cc, the optimization of
a is_record/3 call with a known correct type in
beam_type:simplify_basic_1/3 has not been covered.
|
|
In 3d0f4a3085f11389e5b22d10f96f0cbf08c9337f (an update to conform
with common_test), in all test_lib:recompile(?MODULE) calls, ?MODULE
was changed to the actual name of the module. That would cause
test_lib:recompile/1 to compile the module with the incorrect
compiler options in cloned modules such as record_no_opt_SUITE,
causing worse coverage.
|
|
* hw/call-chmod-without-f:
Call chmod without the "-f" flag
Conflicts:
erts/emulator/test/Makefile
lib/asn1/test/Makefile
lib/crypto/test/Makefile
lib/debugger/test/Makefile
lib/docbuilder/test/Makefile
lib/edoc/test/Makefile
lib/erl_interface/test/Makefile
lib/inviso/test/Makefile
lib/parsetools/test/Makefile
lib/percept/test/Makefile
lib/ssl/test/Makefile
lib/syntax_tools/test/Makefile
lib/test_server/test/Makefile
lib/tools/test/Makefile
OTP-9170
|
|
The compiler (sys_core_fold) tries to avoid constructing tuples
in case expressions. The following code:
c(A, B) ->
case {A,B} of
{ok,X} -> X;
{_,_} -> error
end.
will be rewritten so that no tuple is built. If a clause
requires a tuple to be built as in this code:
c(A, B) ->
case {A,B} of
{ok,X} -> X;
V -> V %The tuple will be built here
end.
the tuple will be built in the clause(s) in which it is needed.
If the value returned from the case is not used as in this code:
c(A, B) ->
case {A,B} of
V -> V %Warning: a term is constructed, but never used
end,
ok.
there will be an incorrect warning. Basically, what happens is
that the code is reduced to:
c(A, B) ->
{A,B}, %Warning: a term is constructed, but never used
ok.
and the optimizer sees that the {A,B} tuple can't possibly be used.
Eliminate the warning by adding a 'compiler_generated' annotation
to the tuple.
Reported-by: Kostis Sagonas
|
|
In the following code:
m(<<Sz:8,_:Sz/binary>>) ->
Sz = wrong.
the Sz variable is supposed to be bound in the function header and the
matching "Sz = wrong" should cause a badarg exception. But what
happens is that the Sz variables seems to be unbound and the matching
succeds and the m/1 function returns 'wrong'.
If the Sz variable is used directly (not matched), it will have
the expected value. Thus the following code:
m(<<Sz:8,_:Sz/binary>>) ->
Sz.
will correctly return the value of Sz that was matched out from
the binary.
Reported-by: Bernard Duggan
|
|
|
|
|
|
* jp/dependencies_makefile:
Add dependencies Makefile generation to erlc(1) and compile(3)
Conflicts:
lib/compiler/test/compile_SUITE.erl
OTP-9065
|
|
This is useful when a project is built with Makefiles and erlc(1)
instead of EMakefiles. Tracking dependencies by hand is error-prone and
it becomes painful when using external application headers like EUnit's
one.
A dependencies Makefile will look like this:
module.beam: module.erl \
/usr/local/lib/erlang/lib/eunit-2.1.4/include/eunit.hrl \
header.hrl
When included in the main Makefile, 'module' will be recompiled only
when needed.
GCC offers the same feature and new erlc(1) options are compatible with
it.
More informations at:
http://wiki.github.com/dumbbell/otp/dependencies-makefile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sometimes the beam_bool pass wants to know whether an
y register will be killed by the code that follows and
will do (effectively):
beam_utils:is_killed({y,Y}, Code, L)
When asked to calculate the liveness for an y register,
beam_utils:is_killed/3 will loop forever if the code
includes a receive loop.
Since this rarely occurs, fix the problem in the simplest
and most conservative way.
Reported-by: Christopher Williams
|
|
When gc_bif instructions occurred outside of a block,
beam_utils:check_liveness/3 did not take into account
that the instruction could do a garbage collection, and
could falsely report that an x register would be killed.
That could cause the beam_dead pass to make the code
unsafe by removing the assignment to an x register that
would subsequently be referenced by the garbage collector.
Reported-by: Christopher Williams
|
|
"-f" is a non-standard chmod option which at least SGI IRIX and HP UX do
not support. As the only effect of the "-f" flag is to suppress warning
messages, it can be safely omitted.
|
|
Moving of allocation instructions upwards in the instruction
stream (in order to enable further optimizations) in beam_block,
is implemented with the assumption that if a register {x,X}
contains a valid term, then all other x register with lower
numbers than X also contain valid terms. That assumption is
true after code generation.
The beam_utils:live_opt/1 optimization, however, may invalidate
that assumption. For instance, if a receive statement exports a
variable that is used, but the return value of the receive statement
is not used, then {x,1} but not {x,0} contains a valid term at the
end of the receive statement. If the receive statement is
followed by
{bif,self,{f,0},[],{x,0}}.
{test_heap,NumberOfWords,2}.
moving the allocation upwards will produce
{test_heap,NumberOfWords,2}.
{bif,self,{f,0},[],{x,0}}.
which will cause the beam_validator pass to scream loudly that
{x,0} is not live at the test_heap instruction.
Fix the problem by doing the optimizations in reverse order.
Reported-by: Jim Engquist
|
|
* bjorn/compiler-bin-generators/OTP-8864:
core_lint: Enforce that tail segments only occur at the end
Don't generate multiple tail segments in binary matching
Factor out some of the code for binary generators
Add tests for tail segments in binary generators
|
|
Code such as
foo(A) -> <<A:0>>.
would cause a compiler crash.
|
|
|
|
The code for generating the string table (which is now
only used for bit syntax matching) in a BEAM file is quite
complicated and potentially expensive when compiling modules
with many thousands of clauses doing bit syntax matching.
Simplify and optimize the code using bit syntax and
binary:match/2 instead of the list operations in the
original code.
|
|
warn_unused_import works correctly (does not give warnings when overridden).
Local call in guard gives its own error pointing out the local/imported
function.
Use of the phrase "overridden auto-imported bif" instead of "redefined
auto-imported bif" in textual error messages.
|
|
|
|
Wrote and changed some tests in stdlib:erl_lint_SUITE
nowarn_bif_clash is obsoleted but will remove warnings and errors about bif
clashes. The recommended way is to use no_auto_import directives instead.
Hopefully erlang.erl is the only user in the world of nowarn_bif_clash.
|
|
Added only a few testcases in compiler:error_SUITE and guard_SUITE
The new behaviour of warnings and errors when overriding autoimported BIF's:
Bifs that were autoimported before R14 are dangerous because old code
using them and overriding them in exports can start behaving
differently. For newly added autoimports this can't happen to the new
code that wants to (or dont want to) use them, why only warnings are
added for the BIFs autoimported after the compilator change. Errors
are issued only for code that could have worked in one way in R13 and
now will behave in a different way.
If overriding autoimport with local function:
- if explicit -compile directive supresses autoimport
-> no message
else
- if called from inside module
- if pre R14 autoimported bif
-> error
else
-> warning
else
-> no message
If overriding autoimport with import directive
- if explicit -compile directive supresses autoimport
-> no message
else (regardless of actual usage)
- if pre R14 autoimported bif
-> error
else
-> warning
Calls of local functions or imports overriding autoimported functions
(either post R14 or by using explicit -compile supressions of
autoimport) always goes to the local function or the imported.
The compileation errors are added to not let code like this silently
and disastrously change its semantic (probably to an infinite loop)
between R13 and R14:
----------
-module(m).
-export([length/1]).
length(X) ->
...
Y = length(Z),
....
----------
The user has to select if he/she wants to call length in 'erlang' explicitly
or if the overriding semantics is desired, in which case the -compile
directive has to be used.
-compile({no_auto_import,[F/A]}). Is added to allow to override the
autoimports so that code gets unanbiguous. The directive will remove
an autoimport even if there is no local function or import overriding,
because any other behaviour would be inconsistent and confusing.
record_info and module_info can never be overridden.
|
|
* bg/compiler-cover-and-clean:
v3_life: Remove clause that cannot match in match_fail/3
v3_life tests: Cover exception handling code in v3_life:function/1
beam_type: Remove redundant clause
v3_core tests: Cover make_bool_switch_guard/5
v3_core tests: Cover handling of pattern aliases
v3_core: Remove a clause in is_simple/1 that cannot match
v3_core: Remove unused support for generating compilation errors
Remove stray support for the put_literal/2 instruction
Remove stray support for the bs_bits_to_bytes2/2 instruction
Remove the bs_bits_to_bytes/3 instruction
Cover handling of 'math' BIFs
beam_bool: Remove a clause in live_regs/1 that cannot match
beam_bool: Cover handling of bs_context_to_binary in initialized_regs/2
beam_bool: Remove a clause in initialized_regs/2 that cannot match
beam_block: Remove a clause that will never be executed
erts: Stop supporting non-literal empty tuples
compile: Remove code that is only executed on Solaris
Do not cover-analyze core_scan
core_SUITE_data: Don't ignore *.core files in this directory
OTP-8636 bg/compiler-cover-and-clean
|
|
|
|
|
|
|
|
Extend float_SUITE to cover the handling of all BIFs in
the 'math' module. This change will increase test coverage
of erl_bifs and erl_type.
|
|
Add a test case (derived from dets_v9:scan_skip/8), to cover the
clause in initialized_regs/2 that handles bs_context_to_binary.
|
|
Compiling from *.core files is not a supported feature, and writing
test cases to improve the coverage of core_scan will not help
us to find more bugs in the compiler.
|
|
|
|
Add the gc_bif's to the VM.
Add infrastructure for gc_bif's (guard bifs that can gc) with two and.
three arguments in VM (loader and VM).
Add compiler support for gc_bif with three arguments.
Add compiler (and interpreter) support for new guard BIFs.
Add testcases for new guard BIFs in compiler and emulator.
|
|
-opaque declarations should not be retained in the attributes
(because they will be loaded along with the code and are not
useful).
While at it, filter away those Dialyzer attributes as early
as possible - in v3_kernel.
|
|
* bg/opt-receive:
Test that gen_server:call/2,3 are fast even with a huge message queue
erts: Add tests for the receive optimization
Update primary bootstrap
erts: Implement recv_mark/1 and recv_set/1 for real
compiler tests: Cover the error handling code in beam_receive
compiler test: Test optimization of receive statements
Optimize selective receives in the presence of a large message queue
Introduce the new recv_mark/1 and recv_mark/1 instructions
Compile tests that communicate with R12 nodes with the r12 option
Move p_run/2 to test_lib
gen: Inline wait_resp_mon/2 to help the compiler optimize
OTP-8623 bg/opt-receive
reveive statements that can only read out a newly created reference are now
specially optimized so that it will execute in constant time regardless of
the number of messages in the receive queue for the process. That
optimization will benefit calls to gen_server:call(). (See gen:do_call/4
for an example of a receive statement that will be optimized.)
|
|
|
|
We don't attempt to run the generated code, but use beam_disasm
and check for the presence or absence (as appropriate) of the
recv_mark/1 and recv_set/1 instructions.
|
|
It can be useful for other test suites.
|
|
* bg/compiler-suppress-result-ignored:
compiler tests: Eliminate "result of expression is ignored" warnings
Silence warnings for expressions that are assigned to "_"
OTP-8602 bg/compiler-suppress-result-ignored
It is now possible to suppress the warning in code such as
"list_to_integer(S), ok" by assigning the ignored value "_" like this: "_ =
list_to_integer(S), ok".
|
|
Original patch from YAMASHINA Hio posted to erlang-patches@
on Tue Jun 12 11:27:53 CEST 2007:
http://www.erlang.org/pipermail/erlang-patches/2007-June/000182.html
http://fleur.hio.jp/pub/erlang/record2.patch
Only had to do minor changes to port the patch to the
current R14A development tree.
Also added compiler/record_SUITE:nested_access/2 to test
nested record access with or without parentheses.
With this change the following will work.
-record(nrec0, {name = <<"nested0">>}).
-record(nrec1, {name = <<"nested1">>, nrec0=#nrec0{}}).
-record(nrec2, {name = <<"nested2">>, nrec1=#nrec1{}}).
nested_access() ->
N0 = #nrec0{},
N1 = #nrec1{},
N2 = #nrec2{},
<<"nested0">> = N0#nrec0.name,
<<"nested1">> = N1#nrec1.name,
<<"nested2">> = N2#nrec2.name,
<<"nested0">> = N1#nrec1.nrec0#nrec0.name,
<<"nested0">> = N2#nrec2.nrec1#nrec1.nrec0#nrec0.name,
<<"nested1">> = N2#nrec2.nrec1#nrec1.name,
<<"nested0">> = ((N2#nrec2.nrec1)#nrec1.nrec0)#nrec0.name,
N1a = N2#nrec2.nrec1#nrec1{name = <<"nested1a">>},
<<"nested1a">> = N1a#nrec1.name,
N2a = N2#nrec2.nrec1#nrec1.nrec0#nrec0{name = <<"nested0a">>},
N2b = ((N2#nrec2.nrec1)#nrec1.nrec0)#nrec0{name = <<"nested0a">>},
<<"nested0a">> = N2a#nrec0.name,
N2a = N2b,
ok.
Signed-off-by: Tuncer Ayaz <[email protected]>
|
