Age | Commit message (Collapse) | Author |
|
maint-22
* john/compiler/fix-fail-path-exceptions-bsm/OTP-15946:
beam_ssa_bsm: Leave ?BADARG_BLOCK alone when cloning fail path
|
|
* john/compiler/fix-unsafe-tuple_size-opt/OTP-15945:
beam_ssa_opt: Do not apply tuple_size optimization outside guards
|
|
This fix is rather ugly and tacked-on, but I'm not comfortable
refactoring the pass in an emergency patch.
|
|
|
|
Rewriting `tuple_size` to `is_tuple` + `tuple_size` will cause it
not to throw an exception, either crashing the compiler or the
emulator when the code runs.
|
|
* john/compiler/fix-bad-bitstring-type-opt/OTP-15872:
beam_ssa_type: Fix incorrect bitstring unit determination
|
|
The following sequence would be wrongly optimized into a
i_get_tuple_element2 instruction, reading an element from the
wrong tuple:
{get_tuple_element,{x,0},1,{x,0}}.
{get_tuple_element,{x,0},2,{x,1}}.
|
|
The compiler would treat the "Unit" of bs_init instructions as
the unit of the result instead of the required unit of the input,
causing is_binary checks to be wrongly optimized away.
|
|
* bjorn/compiler/fix-beam_ssa_dead-patch/OTP-15845:
Fix unsafe optimizations where guard tests could be removed
|
|
'bjorng_ghub/bjorn/compiler/fix-beam_ssa_dead-crash/ERL-956/OTP-15848' into maint-22
* bjorng_ghub/bjorn/compiler/fix-beam_ssa_dead-crash/ERL-956/OTP-15848:
Eliminate crash in the beam_ssa_dead compiler pass
|
|
into maint-22
* bjorn/compiler/fix-unloadable-code-patch/ERL-955/OTP-15846:
Fix loading of Core Erlang code for extracting a map element
|
|
* bjorn/compiler/fix-beam_except/ERL-954/OTP-15839:
Fix compiler crash in beam_except
|
|
* john/compiler/list_append_type/OTP-15841:
compiler: Fix broken type for erlang:'++'/2
|
|
* bjorn/compiler/fix-receive-patch/ERL-950/OTP-15832:
Eliminate compiler crash when compiling complex receive statements
|
|
A repeated test could be optimized away. Example:
bar(A) ->
if is_bitstring(A) ->
if is_binary(A) ->
binary;
true ->
bitstring
end;
true ->
other
end.
In the example, the `is_binary/1` test would be optimized away,
basically turning the example into:
bar(A) ->
if is_bitstring(A) ->
bitstring;
true ->
other
end.
Thanks user Marcus Kruse in the Elixir forum for noticing this bug.
|
|
The compiler could crash in the beam_ssa_dead pass while compiling
complex nested `case` expressions. See the added test case for an
example and explanation.
https://bugs.erlang.org/browse/ERL-956
|
|
The compiler would crash in `beam_except` while compiling this
function:
bar(Req) ->
ok = case Req of
"POST" -> {error, <<"BAD METHOD ", Req/binary>>, Req};
_ -> ok
end.
https://bugs.erlang.org/browse/ERL-954
|
|
|
|
The following Core Erlang code could not be loaded:
'f'/1 = fun (_1) ->
case <_1> of
<~{'foo':='foo'}~> when 'true' ->
_1
end
Loading would fail with the following message:
beam/beam_load.c(2314): Error loading function example:f/1: op i_get_map_element_hash p x a u x:
no specific operation found
https://bugs.erlang.org/browse/ERL-955
|
|
Certain complex receive statements would result in an internal
compiler failure. That would happen when the compiler would fail
to find the common exit block following a receive. See the added
test case for an example.
https://bugs.erlang.org/browse/ERL-950
|
|
The compiler would not terminate while compiling the following code:
foo(<<N:32>>, Tuple, NewValue) ->
_ = element(N, Tuple),
setelement(N, Tuple, NewValue).
The type analysis pass would attempt to construct a huge list when
attempting analyse the type of `Tuple` after the call to
`setelement/3`.
https://bugs.erlang.org/browse/ERL-948
|
|
* john/compiler/fix-missing-match-reposition/ERL-923:
compiler: Propagate match context position on fail path
|
|
|
|
|
|
* bjorn/compiler/cuddle-with-tests:
Verify the highest opcode for the r21 test suites
Add test_lib:highest_opcode/1
sys_core_fold: Simplify case_expand_var/2
beam_validator: Remove uncovered lines in lists_mod_return_type/3
Cover return type determination of lists functions
|
|
Validation could fail when a function that never returned was used
in a try block (see attached test case). It's possible to solve
this without disabling the optimization as the generated code is
sound, but I'm not comfortable making such a large change this
close to the OTP 22 release.
|
|
|
|
|
|
|
|
|
|
Optimize tail-recursive calls of BIFs
OTP-15674
|
|
BEAM currently does not call BIFs at the end of a function in a
tail-recursive way. That is, when calling a BIF at the end of a
function, the BIF is first called, and then the stack frame
is deallocated, and then control is transferred to the caller.
If there is no stack frame when a BIF is called in the tail position,
the loader will emit a sequence of three instructions: first an
instruction that allocates a stack frame and saves the continuation
pointer (`allocate`), then an instruction that calls the BIF
(`call_bif`), and lastly an instruction that deallocates the stack
frame and returns to the caller (`deallocate_return`).
The old compiler would essentially allocate a stack frame for each
clause in a function, so it would not be that common that a BIF was
called in the tail position when there was no stack frame, so the
three-instruction sequence was deemed acceptable.
The new compiler only allocates stack frames when truly needed, so
the three-instruction BIF call sequence has become much more common.
This commit introduces a new `call_bif_only` instruction so that only
one instruction will be needed when calling a BIF in the tail position
when there is no stack frame. This instruction is also used when there
is a stack frame to make it possible to deallocate the stack frame
**before** calling the BIF, which may make a subsequent garbage
collection at the end of the BIF call cheaper (copying less garbage).
The one downside of this change is that the function that called the
BIF will not be included in the stack backtrace (similar to how a
tail-recursive call to an Erlang function will not be included in the
backtrace).
That was the quick summary of the commit. Here comes a detailed look
at how BIF calls are translated by the loader. The first example is a
function that calls `setelement/3` in the tail position:
update_no_stackframe(X) ->
setelement(5, X, new_value).
Here is the BEAM code:
{function, update_no_stackframe, 1, 12}.
{label,11}.
{line,[...]}.
{func_info,{atom,t},{atom,update_no_stackframe},1}.
{label,12}.
{move,{x,0},{x,1}}.
{move,{atom,new_value},{x,2}}.
{move,{integer,5},{x,0}}.
{line,[...]}.
{call_ext_only,3,{extfunc,erlang,setelement,3}}.
Because there is no stack frame, the `call_ext_only` instruction will
be used to call `setelement/3`:
{call_ext_only,3,{extfunc,erlang,setelement,3}}.
The loader will transform this instruction to a three-instruction
sequence:
0000000020BD8130: allocate_tt 0 3
0000000020BD8138: call_bif_e erlang:setelement/3
0000000020BD8148: deallocate_return_Q 0
Using the `call_bif_only` instruction introduced in this commit,
only one instruction is needed:
000000005DC377F0: call_bif_only_e erlang:setelement/3
`call_bif_only` calls the BIF and returns to the caller.
Now let's look at a function that already has a stack frame when
`setelement/3` is called:
update_with_stackframe(X) ->
foobar(X),
setelement(5, X, new_value).
Here is the BEAM code:
{function, update_with_stackframe, 1, 14}.
{label,13}.
{line,[...]}.
{func_info,{atom,t},{atom,update_with_stackframe},1}.
{label,14}.
{allocate,1,1}.
{move,{x,0},{y,0}}.
{line,[...]}.
{call,1,{f,16}}.
{move,{y,0},{x,1}}.
{move,{atom,new_value},{x,2}}.
{move,{integer,5},{x,0}}.
{line,[...]}.
{call_ext_last,3,{extfunc,erlang,setelement,3},1}.
Since there is a stack frame, the `call_ext_last` instruction will be used
to deallocate the stack frame and call the function:
{call_ext_last,3,{extfunc,erlang,setelement,3},1}.
Before this commit, the loader would translate this instruction to:
0000000020BD81B8: call_bif_e erlang:setelement/3
0000000020BD81C8: deallocate_return_Q 1
That is, the BIF is called before deallocating the stack frame and returning
to the calling function.
After this commit, the loader will translate the `call_ext_last` like this:
000000005DC37868: deallocate_Q 1
000000005DC37870: call_bif_only_e erlang:setelement/3
There are still two instructions, but now the stack frame will be
deallocated before calling the BIF, which could make the potential
garbage collection after the BIF call slightly more efficient (copying
less garbage).
We could have introduced a `call_bif_last` instruction, but the code
for calling a BIF is relatively large and there does not seem be a
practical way to share the code between `call_bif` and `call_bif_only`
(since the difference is at the end, after the BIF call). Therefore,
we did not want to clone the BIF calling code yet another time to
make a `call_bif_last` instruction.
|
|
For reasons better explained in the source code, ssa_opt_float
skips optimizing inside guards but it failed to do so
consistently; while the pass never processed guard blocks, it was
still possible to erroneously defer error checking to a guard
block, crashing the compiler once it realized its state was
invalid.
|
|
Type subtraction never resulted in the 'none' type, even when it
was obvious that it should. Once that was fixed it became apparent
that inequality checks also fell into the same subtraction trap
that the type pass warned about in a comment.
This then led to another funny problem with select_val, consider
the following code:
{bif,'>=',{f,0},[{x,0},{integer,1}],{x,0}}.
{select_val,{x,0},{f,70},{list,[{atom,false},{f,69},
{atom,true},{f,68}]}}.
The validator knows that '>=' can only return a boolean, so once it
has subtracted 'false' and 'true' it killed the state because all
all valid branches had been taken, so validation would crash once
it tried to branch off the fail label.
|
|
The current type conflict resolution works well for the example
case in the comment, but doesn't handle branched code properly,
consider the following:
{label,2}.
{test,is_tagged_tuple,{f,ignored},[{x,0},3,{atom,r}]}.
{allocate_zero,2,1}.
{move,{x,0},{y,0}}.
%% {y,0} is known to be {r, _, _} now.
{get_tuple_element,{x,0},2,{x,0}}.
{'try',{y,1},{f,3}}.
%% ... snip ...
{jump,{f,5}}.
{label,3}.
{try_case,{y,1}}.
%% {x,0} is the error class (an atom), {x,1} is the error term.
{test,is_eq_exact,{f,ignored},[{x,0},{y,0}]}.
%% ... since tuples and atoms can't meet, the type of {y,0} is
%% now {atom,[]} because the current code assumes the type
%% we're updating with.
{move,{x,1},{x,0}}.
{jump,{f,5}}.
{label,5}.
%% ... joining tuple (block 2) and atom (block 3) means 'term',
%% so the get_tuple_element instruction fails to validate
%% despite this being unrechable from block 3.
{test_heap,3,1}.
{get_tuple_element,{y,0},1,{x,1}}.
{put_tuple2,{x,0},{list,[{x,1},{x,0}]}}.
{deallocate,2}.
return.
This commit kills the state on type conflicts, making unreachable
instructions truly unreachable.
|
|
Building terms with fragile contents is okay because the GC is
disabled during loop_rec, and the resulting term won't be reachable
from the root set afterwards.
ERL-862
|
|
This is a rather subtle but important distinction. While tracking
types on a per-register basis is fairly effective, it forces us to
track which registers alias each other, and makes it tricky to infer
types over large blocks of code as instruction arguments may have
been clobbered between definition and inference.
Tracking types on a per-value basis makes us immune to these
problems.
|
|
Consider the following code:
bme(Int) ->
TagInt = Int band 2#111,
Tag = case TagInt of
0 -> a; 1 -> b; 2 -> c; 3 -> d;
4 -> e; 5 -> f; 6 -> g; 7 -> h
end,
case Tag of
g -> expects_g(TagInt, Tag);
h -> expects_h(TagInt, Tag);
_ -> Tag = id(Tag), ok
end.
expects_g(6, Atom) -> Atom = id(g), ok.
expects_h(7, Atom) -> Atom = id(h), ok.
The type optimization pass would recognize that TagInt can only be
[0 .. 7], so the first 'case' would select_val over [0 .. 6] and swap
out the fail label with the block for 7.
A later optimization would merge this block with 'expects_h' in the
second case, as the latter is only reachable from the former.
... but this broke down when the move elimination optimization didn't
take the fail label of the first select_val into account. This caused it
believe that the only way to reach 'expects_h' was through the second
case when 'Tag' =:= 'h', which made it remove the move instruction
added in the first case, passing garbage to expects_h/2.
|
|
`sys_core_fold` has an optimization of repeated pattern matching.
For example, when a record is matched the first time, the pattern
is remembered. When the same record is matched again, the matching
does not need to be repeated, but the variables bound in the first
matching can be re-used.
It turns out that that there is a name capture problem when the old
inliner is used. The old inliner is used when explicitly inling
certain functions, and by the compiler test suites for testing the
compiler.
The name capture problem could be eliminated by more aggressive
variable renaming when inlining.
But, fortunately, given the new SSA passes, this optimization is no
longer as essential as it used to be. Removing the optimization
turns out to be mostly benefical, leading to a smaller stack
frame in many cases.
Also remove the optimizations of `element/2`, `is_record/3`, and
`setelement/3` from `sys_core_fold`. Because matched patterns are no
longer remembered, those optimizations can very rarely be applied any
more. (Those same optimizations are already done in `beam_ssa_type`.)
|
|
|
|
|
|
The expansion of record field updates, when more than one field is
updated, but not a majority of the fields, will create a sequence of
calls to `erlang:setelement(Index, Value, Tuple)` where Tuple in the
first call is the original record tuple, and in the subsequent calls
Tuple is the result of the previous call. Furthermore, all Index
values are constant positive integers, and the first call to
`setelement` will have the greatest index. Thus all the following
calls do not actually need to test at run-time whether Tuple has type
tuple, nor that the index is within the tuple bounds.
Since OTP R7, the `sys_core_dsetel` pass, run as the very last Core
Erlang pass, has optimized this sequence of `setelement` calls to use
a special destructive version of `setelement` (called
`set_tuple_element`) for all but the very first `setelement` in the
sequence.
It turns out that the presence of the `set_tuple_element` in SSA code
is awkward and can prevent or complicate type analysis and aggressive
optimizations.
Therefore, this commit removes the `sys_core_dsetel` pass and
reimplements it for SSA code. The optimization will be done in the
`beam_ssa_pre_codegen` pass (that is, just before code generation and
after running all other SSA code optimization passes).
In most cases, the resulting BEAM code is identical to previous
code. For a few modules, the BEAM code is actually slightly better,
with smaller stack frames.
|
|
The sole purpose of inline_SUITE:coverage/1 is to ensure
that all lines are covered in sys_core_inline. Do that
in a cheaper way.
|
|
This test case does not test anything unique that is not
tested by other test cases.
|
|
This makes sure that the SSA optimizations are not essential and
may help to cover more code in beam_ssa_pre_codegen and
beam_ssa_codegen.
|
|
|
|
|
|
|
|
With the recent update to cover to use the `counters` modules,
there is no longer any reason to limit the number of parallel
processes when running `cover`.
|
|
This change saves about about a minute when running the
cover-compiled compiler tests.
|