| Age | Commit message (Collapse) | Author |
|---|
|
* maint:
Fix incorrect internal consistency failure for binary matching code
|
|
4c31fd0b9665 made the merging of match contexts stricter;
in fact, a little bit too strict.
Two match contexts with different number of slots would
be downgraded to the 'term' type. The correct way is to
keep the match context but set the number of slots to the
lowest number of slots of the two match contexts.
https://bugs.erlang.org/browse/ERL-490
|
|
Add compile_info option to compile
OTP-14615
|
|
This allows compilers built on top of the compile module
to attach external compilation metadata to the compile_info
chunk.
For example, Erlang uses this chunk to store the compiler
version. Elixir and LFE may augment this by also adding
their own compiler versions, which can be useful when
debugging.
The deterministic option does not affect the user supplied
compile_info. It is therefore the responsibility of external
compilers to guarantee any added information does not violate
the determinsitic option, if such option is supported.
Finally, this code moves the building of the compile_info
options to the compile module instead of beam_asm, moving
all of the option mangling code to a single place.
|
|
Optimise equality comparisons
|
|
* In both loader and compiler, make sure constants are always the second
operand - many passes of the compiler assume that's always the case.
* In loader rewrite is_eq_exact with same arguments to skip the instruction
and with different constants move one to an x register to maintain
the properly outlined above.
* The same (but in reverse) is done with the is_ne_exact, where we rewrite
to an unconditional jump or add a move to an x register.
* All of the above allow to replace is_eq_exact_fss with is_eq_exact_fyy and
is_ne_exact_fss with is_ne_exact_fSS as those are the only possibilities left.
|
|
The compiler could sometimes emit unnecessary 'move'
instructions in the code for binary matching, for
example for this function:
escape(<<Byte, Rest/bits>>, Pos) when Byte >= 127 ->
escape(Rest, Pos + 1);
escape(<<Byte, Rest/bits>>, Pos) ->
escape(Rest, Pos + Byte);
escape(<<_Rest/bits>>, Pos) ->
Pos.
The generated code would look like this:
{function, escape, 2, 2}.
{label,1}.
{line,[{location,"t.erl",17}]}.
{func_info,{atom,t},{atom,escape},2}.
{label,2}.
{test,bs_start_match2,{f,1},2,[{x,0},0],{x,0}}.
{test,bs_get_integer2,
{f,4},
2,
[{x,0},
{integer,8},
1,
{field_flags,[{anno,[17,{file,"t.erl"}]},unsigned,big]}],
{x,2}}.
{'%',{bin_opt,[17,{file,"t.erl"}]}}.
{move,{x,0},{x,3}}. %% UNECESSARY!
{test,is_ge,{f,3},[{x,2},{integer,127}]}.
{line,[{location,"t.erl",18}]}.
{gc_bif,'+',{f,0},4,[{x,1},{integer,1}],{x,1}}.
{move,{x,3},{x,0}}. %% UNECESSARY!
{call_only,2,{f,2}}.
{label,3}.
{line,[{location,"t.erl",20}]}.
{gc_bif,'+',{f,0},4,[{x,1},{x,2}],{x,1}}.
{move,{x,3},{x,0}}. %% UNECESSARY!
{call_only,2,{f,2}}.
{label,4}.
{move,{x,1},{x,0}}.
return.
The redundant 'move' instructions have been marked.
To avoid the 'move' instructions, we can extend the existing
function is_context_unused/1 in v3_codegen. If v3_codegen can
know that the match context will not be used again, it can reuse
the register for the match context and avoid the extra 'move'
instructions.
https://bugs.erlang.org/browse/ERL-444
|
|
Enhance optimisations in beam_peep
|
|
Remove query keyword residues
|
|
When cleaning selects, it might happen we're left with only one pair. In such
case convert to a regular test + jump.
|
|
query was no longer a keyword since the commit 0dc3a29744bed0b7f483ad72e19773dc0982ea50 2012-11-19.
So the quotes around query, when it used as atom, no needed.
|
|
Conflicts:
OTP_VERSION
|
|
* maint-20:
Updated OTP version
Prepare release
Accept non-binary options as socket-options
Bump version
Fix broken handling of default values in extensions for PER
compiler: Fix live regs update on allocate in validator
Take fail labels into account when determining liveness in block ops
Check for overflow when appending binaries, and error out with system_limit
|
|
'john/compiler/fail-labels-in-blocks-otp-19/ERIERL-48/OTP-14522' into maint-20
* john/compiler/fail-labels-in-blocks-otp-19/ERIERL-48/OTP-14522:
compiler: Fix live regs update on allocate in validator
Take fail labels into account when determining liveness in block ops
|
|
|
|
bjorng/bjorn/compiler/improve-case-opt/ERL-452/OTP-14525
Generalize optimization of "one-armed" cases
|
|
* maint:
sys_core_fold: Fix unsafe optimization of non-variable apply
Correct type specification in ssl:prf/5
|
|
A 'case' expression will force a stack frame (essentially in the same
way as a function call), unless it is at the end of a function.
In sys_core_fold there is an optimization that can optimize one-armed
cases such as:
case Expr of
Pat1 ->
DoSomething;
Pat2 ->
erlang:error(bad)
end,
MoreCode.
Because only one arm of the 'case' can succeed, the code after the
case can be move into the successful arm:
case Expr of
Pat1 ->
DoSomething,
MoreCode;
Pat2 ->
erlang:error(bad)
end.
Thus, the 'case' is at the end of the function and it will no longer
need a stack frame.
However, the optimization in sys_core_fold would not be applied if
there were more than one failing clause such as in this code:
case Expr of
Pat1 ->
DoSomething,
MoreCode;
Pat2 ->
erlang:error(bad);
_ ->
erlang:error(case_clause)
end.
Generalize the optimization to handle any number of failing
clauses at the end of the case.
Reported-by: bugs.erlang.org/browse/ERL-452
|
|
The sys_core_fold pass would do an unsafe "optimization" when an
apply operation did not have a variable in the function position
as in the following example:
> cat test1.core
module 'test1' ['test1'/2]
attributes []
'i'/1 =
fun (_f) -> _f
'test1'/2 =
fun (_f, _x) ->
apply apply 'i'/1 (_f) (_x)
end
> erlc test1.core
no_file: Warning: invalid function call
Reported-by: Mikael Pettersson
|
|
Add stacktrace entries to BIF calls from emulator
|
|
The goal of this change is to improve debugging of
emulator calls. For example, the following code
rem(1, y)
will error with atom `badarith` when y is 0 and the
stacktrace has no entry for `erlang:rem/2`, making
such cases very hard to debug. This patch makes it
so the stacktrace includes `erlang:rem(1, 0)`.
The following emulator BIFs have been changed:
* band/2
* bnot/1
* bor/2
* bsl/2
* bsr/2
* bxor/2
* div/2
* element/2
* int_div/2
* rem/2
* sminus/2
* splus/2
* stimes/2
|
|
Introduce a new core pass called sys_core_alias
OTP-14505
|
|
The goal of this pass is to find values that are built from
patterns and generate aliases for those values to remove
pressure from the GC. For example, this code:
example({ok, Val}) ->
{ok, Val}.
shall become:
example({ok, Val} = Tuple) ->
Tuple.
Currently this pass aliases tuple and cons nodes made of literals,
variables and other cons. The tuple/cons may appear anywhere in the
pattern and it will be aliased if used later on.
Notice a tuple/cons made only of literals is not aliased as it may
be part of the literal pool.
|
|
Tuple calls is the ability to invoke a function on a tuple
as first argument:
1> Var = dict:new().
{dict,0,16,16,8,80,48,
{[],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[]},
{{[],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[]}}}
2> Var:size().
0
This behaviour is considered by most to be undesired and confusing,
especially when it comes to errors. For example, imagine you invoke
"Mod:new()" where a Mod is an atom and you accidentally pass {ok, dict}.
It raises:
{undef,[{ok,new,[{ok,dict}],[]},...]}
As it attempts to invoke ok:new/1, which is really hard to debug
as there is no call to new/1 on the source code.
Furthemore, this behaviour is implemented at the VM level, which
imposes such semantics on all languages running on BEAM.
Since we cannot remove the behaviour above, this proposal makes the
behaviour opt-in with a compiler flag:
-compile(tuple_calls).
This means that, if a codebase relies on this functionality, they
can keep compatibility by adding configuring their build tool to
always use the 'tuple_calls' flag or explicitly on each module.
As long as the compile attribute above is listed, the codebase will
work on old and new Erlang versions alike. The only downside of the
current implementation is that modules compiled on OTP 20 that rely
on 'tuple_calls' will have to be recompiled to run with 'tuple_calls'
on OTP 21+.
|
|
|
|
https://bugs.erlang.org/browse/ERL-433
|
|
As part of sys_core_fold, variables involved in bit syntax
matching would be annotated when it would be safe for a later
pass to do the delayed sub-binary creation optimization.
An implicit assumption regarding the annotation was that the
code must not be further optimized. That assumption was broken
in 05130e48555891, which introduced a fixpoint iteration
(applying the optimizations until there were no more changes).
That means that a variable could be annotated as safe for
reusing the match context in one iteration, but a later iteration
could rewrite the code in a way that would make the optimization
unsafe.
One way to fix this would be to clear all reuse_for_context
annotations before each iteration. But that would be wasteful.
Instead I chose to fix the problem by moving out the annotation
code to a separate pass (sys_core_bsm) that is run later after
all major optimizations of Core Erlang has been done.
|
|
compile:forms/1,2 is documented to return:
{ok,ModuleName,BinaryOrCode}
However, if one of the options 'from_core', 'from_asm', or
'from_beam' is given, ModuleName will be returned as [].
A worse problem is that is that if one those options are
combined with the 'native' option, compilation will crash.
Correct compile:forms/1,2 to pick up the module name from
the forms provided (either Core Erlang, Beam assembly code,
or a Beam file).
Reported here: https://bugs.erlang.org/browse/ERL-417
|
|
A core dump can't be created with the name 'core' if there is
a directory named 'core'.
Rename the test case from core/1 to core_pp/1 so that the directory
name can be the same as the test case name. It also makes sense
to use a less generic name for the test case.
|
|
|
|
The uncovered clause was introduced in bee8f839296e.
|
|
Also test other options that turns off certain optimizations or
instruction sets.
|
|
Add a test for utf8 function names
|
|
The test found a bug in v3_kernel_pp which was not
taking into account utf8 atoms. The bug has also
been fixed.
|
|
Remove unused variable warning in compile_SUITE
|
|
|
|
|
|
Introduce new "Dbgi" chunk
OTP-14369
|
|
The new Dbgi chunk returns data in the following format:
{debug_info_v1, Backend, Data}
This allows compilers to store the debug info in different
formats. In order to retrieve a particular format, for
instance, Erlang Abstract Format, one may invoke:
Backend:debug_info(erlang_v1, Module, Data, Opts)
Besides introducing the chunk above, this commit also:
* Changes beam_lib:chunk(Beam, [:abstract_code]) to
read from the new Dbgi chunk while keeping backwards
compatibility with old .beams
* Adds the {debug_info, {Backend, Data}} option to
compile:file/2 and friends that are stored in the
Dbgi chunk. This allows the debug info encryption
mechanism to work across compilers
* Improves dialyzer to work directly on Core Erlang,
allowing languages that do not have the Erlang
Abstract Format to be dialyzer as long as they emit
the new chunk and their backend implementation is
available
Backwards compatibility is kept across the board except
for those calling beam_lib:chunk(Beam, ["Abst"]), as the
old chunk is no longer available. Note however the "Abst"
chunk has always been optional.
Future OTP versions may remove parsing the "Abst" chunk
altogether from beam_lib once Erlang 19 and earlier is no
longer supported.
The current Dialyzer implementation still supports earlier
.beam files and such may also be removed in future versions.
|
|
Fixes https://bugs.erlang.org/browse/ERL-406 - a bug introduced in
0377592dc2238f561291be854d2ce859dd9a5fb1
|
|
The test is supposed to compare the Core Erlang code that has been
printed and parsed back. It did compare and print any differences,
but it did not fail when there were differences.
Also fix problems with variable names and maps not comparing
equal when the inliner has been used.
|
|
|
|
Two dummy .erl files are created while releasing the tests for
the compiler. Remove the files after they have been copied to
the release directory to avoid that they show up as untracked
files in the output of "git status".
|
|
beam_type: Avoid an internal consistency check failure
|
|
Code such as the following:
-record(x, {a}).
f(R, N0) ->
N = N0 / 100,
if element(1, R#x.a) =:= 0 ->
N
end.
would fail to compile with the following message:
m: function f/2+19:
Internal consistency check failed - please report this bug.
Instruction: {fmove,{fr,0},{x,1}}
Error: {uninitialized_reg,{fr,0}}:
This bug was introduced in 348b5e6bee2f.
Basically, the beam_type pass placed the fmove instruction in the
wrong place. Instructions that store to floating point registers and
instructions that read from floating point registers are supposed to
be in the same basic block.
Fix the problem by flushing all floating points instruction
before a call the pseudo-BIF is_record/3, thus making sure that
the fmove instruction is placed in the correct block.
Here is an annotated listing of the relevant part of the .S
file (before the fix):
{test_heap,{alloc,[{words,0},{floats,1}]},2}.
{fconv,{x,1},{fr,0}}.
{fmove,{float,100.0},{fr,1}}.
fclearerror.
{bif,fdiv,{f,0},[{fr,0},{fr,1}],{fr,0}}.
{fcheckerror,{f,0}}.
%% The instruction {fmove,{fr,0},{x,1}} should have
%% been here.
%% Block of instructions expanded from a call to
%% the pseudo-BIF is_record/3. (Expanded in a later
%% compiler pass.)
{test,is_tuple,{f,3},[{x,0}]}.
{test,test_arity,{f,3},[{x,0},2]}.
{get_tuple_element,{x,0},0,{x,2}}.
{test,is_eq_exact,{f,3},[{x,2},{atom,x}]}.
{move,{atom,true},{x,2}}.
{jump,{f,4}}.
{label,3}.
{move,{atom,false},{x,2}}.
{label,4}.
%% End of expansion.
%% The fmove instruction that beam_validator complains
%% about.
{fmove,{fr,0},{x,1}}.
Reported-by: Richard Carlsson
|
|
|
|
This allow languages such as Elixir and LFE to attach
extra chunks to the .beam file without having to parse
the beam file after compilation.
This commit also cleans up the interface to beam_asm,
allowing chunks to be passed from the compiler without
a need to change beam_asm API on every new chunk.
|
|
* josevalim/atu8-chunk/PR-1078/OTP-14178:
Add new AtU8 beam chunk
|
|
The new chunk stores atoms encoded in UTF-8.
beam_lib has also been modified to handle the new
'utf8_atoms' attribute while the 'atoms' attribute
may be a missing chunk from now on.
The binary_to_atom/2 BIF can now encode any utf8
binary with up to 255 characters.
The list_to_atom/1 BIF can now accept codepoints
higher than 255 with up to 255 characters (thanks
to Björn Gustavsson).
|
|
|
