| Age | Commit message (Collapse) | Author |
|---|
|
By first adding a call to error/1 to each uncovered line,
QuickCheck could find test cases that would cover the lines.
|
|
Make sure we don't optimize code such as:
is_tuple Fail Src
test_arity Fail Src Arity
get_tuple_element Src Pos Dst
is_map Fail Src
If we would reorder the instructions like this:
is_tuple Fail Src
test_arity Fail Src Arity
is_map Fail Src
get_tuple_element Src Pos Dst
beam_validator would complain that the type for Src is a map
instead of a tuple. Since the code has problems to begin with,
there is no need to do the optimization.
|
|
When calculating the sets of registers that must be killed or
unused, registers set in a {protected,_,_,_} block were not
considered. That could result in a crash in the
assertion in beam_utils:live_opt_block/4.
|
|
a3ec2644f5 attempted to teach v3_core not to generate code with
unbound variables. The approach taken in that commit is to
discard all expressions following a badmatch. That does not
work if the badmatch is nested:
{[V] = [] = foo,V},
V
That would be rewritten to:
{error({badmatch,foo})},
V
where V is unbound.
If we were to follow the same approach, the tuple construction
code would have to look out for a badmatch. As would list construction,
begin...end, and so on.
Therefore, as it is impractical to discard all expressions that
follow a badmatch, the only other solution is to ensure that the
variables that the pattern binds will somehow be bound. That can
be arranged by rewriting the pattern to a pattern that binds the
same variables. Thus:
error({badmatch,foo}),
E = foo,
case E of
{[V],[]} ->
V;
Other ->
error({badmatch,Other}
end
|
|
The following code:
simple() ->
case try 0 after [] end of
0 -> college;
1 -> 0
end.
would crash the compiler like this:
crash reason: {case_clause,
{'EXIT',
{function_clause,
[{beam_type,simplify_select_val_int,
[{select,select_val,
{x,0},
{f,7},
[{integer,1},{f,9},{integer,0},{f,8}]},
0],
[{file,"beam_type.erl"},{line,169}]},
{beam_type,simplify_basic_1,3,
[{file,"beam_type.erl"},{line,155}]},
{beam_type,opt,3,[{file,"beam_type.erl"},{line,57}]},
{beam_type,function,1,[{file,"beam_type.erl"},{line,36}]},
{beam_type,'-module/2-lc$^0/1-0-',1,
[{file,"beam_type.erl"},{line,30}]},
{beam_type,module,2,[{file,"beam_type.erl"},{line,30}]},
{compile,'-select_passes/2-anonymous-2-',2,
[{file,"compile.erl"},{line,521}]},
{compile,'-internal_comp/4-anonymous-1-',2,
[{file,"compile.erl"},{line,306}]}]}}}
The root cause is that the type representation is not well-defined.
Integers could be represented in three different ways:
integer
{integer,{1,10}}
{integer,0}
However, only the first two forms were handled.
To avoid similar problems in the future:
* Make the type representation stricter. Make sure that integers are
only represented as 'integer' or {integer,{Min,Max}}.
* Call verify_type/1 whenever a new type is added (not only when
merging types) to ensure that only the supported types are added
to the type database).
(ERL-150)
|
|
We must be careful how we treat the type info for the result of:
setelement(Index, Tuple, NewValue)
If Tuple had type information, the result of setelement/3 (in x(0))
would be assigned the same type information. But that is not safe
for:
setelement(1, Tuple, NewValue)
since the type for the first element will be changed.
Therefore, we must take care to remove the type information for
the first element of the tuple if might have been modified by
setelement/3.
|
|
* bjorn/compiler/beam_bool/ERL-143:
Eliminate crash in beam_bool
Add beam_bool_SUITE
Add missing test cases in andor_SUITE and beam_block_SUITE
|
|
beam_bool would crash when attempting to optimize BEAM code similar
to this code:
bif '=:=' Reg1 SomeValue => y(0)
bif '=:=' Reg2 {atom,true} => x(2)
bif '=:=' Reg3 {atom,true} => x(3)
bif 'or' x(2) x(3) => x(2)
is_eq_exact Fail x(2) {atom,true}
The problem is that the first instruction that assigns a value to a Y
register. beam_bool:ssa_assign/2 will not accept a Y register
argument.
We could change ssa_assign/2 to accept a Y register, but that would
only cause the entire optimization to be rejected later because the Y
register is alive in the code that follows. Therefore, a better
solution is to modify extend_block/3 so that the instruction that
assign to Y registers are not added to the block. That is, the
optimizer will only operate on the following code:
bif '=:=' Reg2 {atom,true} => x(2)
bif '=:=' Reg3 {atom,true} => x(3)
bif 'or' x(2) x(3) => x(2)
is_eq_exact Fail x(2) {atom,true}
Usually the optimization will succeed, rewriting the four instructions
to a select_val instruction.
Assembly code such as the above can be produced by code similar to:
Y = Something == SomethingElse,
case Y of
Condition; OtherCondition ->
. . .
end,
. . .,
Y.
Reported-by: http://bugs.erlang.org/browse/ERL-143
Reported-by: José Valim
|
|
It's time that we have a dedicated test suite for beam_bool.
|
|
Two test cases were not actually run. Even if their main purpose is to
ensure that the compiler doesn't crash, we always try to also run the
test case (when practial) to also ensure that the generated code is
correct.
|
|
The inliner generates variable whose names are numeric. Run
the inliner to cover one more line in core_pp.
|
|
Several test cases in compile_SUITE (e.g. core/1) extracts the
abstract code from a BEAM file and runs the compiler on it.
It is only a waste of time to use the abstract code from
cloned versions of test case modules. That is, use record_SUITE,
but don't use record_no_opt_SUITE, record_post_opt_SUITE, or
record_inline_SUITE since they all contain essentially the same
abstract code.
|
|
Add is_cloned_mod(Mod) to determine whether Mod is the original
name for a module (e.g. record_SUITE) or a cloned module
(e.g. record_no_opt_SUITE).
|
|
Recent spring cleaning in the test suite left a line in sys_core_fold
dealing with an unnecessary catch uncovered.
|
|
Correct calculation of the number of parallel processes to use
when cover is used. It was supposed not to exceed 4 (according to
the comment), but it was calculated as the number of schedulers.
On my computer, having 8 schedulers, this change made the compiler
test suite with cover run almost twice as fast.
|
|
|
|
v3_core would generate unsafe code for the following example:
f() ->
{ok={error,E}} = foo(),
E.
Internally, the code would look similar to:
f() ->
Var = foo(),
error({badmatch,Var}),
E.
That is, there would remain a reference to an unbound variable.
Normally, sys_core_fold would remove the reference to 'E', but if
if optimization was disabled the compiler would crash.
|
|
With 'export_all' it is easy to add a new test case function
and forget to add its name to the list of test cases to run.
While we are it, remove unused functions and add the forgotten
test case on_load_inline/1.
|
|
It has not been used for ages.
|
|
|
|
|
|
|
|
long_string/1 was written to test that long string were handled
efficiently in beam_asm. Strings used to be stored in the string
table chunk, but are currently literals.
There does not seem that this test case is likely to find any bugs.
|
|
|
|
missing_testheap/1 is no longer relevant for the following reasons:
1) Because of the literal pool introduced in R12, no test_heap
instructions are needed in the guards.
2) beam_validator would abort the compilation if any needed test_heap
instructions were missing.
|
|
The integer_encoding/1 test is supposed to be run with a tighter
timetrap ensure that encoding of integer in BEAM files is efficient
enough.
|
|
beam_utils_SUITE didn't exist when the two test cases were written.
|
|
|
|
Obsoleted by guard_SUITE (especially literal_type_tests/1).
|
|
|
|
We used to put code that would crash the compiler into
compilation_SUITE_data. That way we would have a failing test case to
remind us to fix a bug.
Nowadays, we generally fix the bug and write the test case at the same
time. Therefore it makes more sense to put the test code directly into
a test suite.
Move out bin_syntax_1 through bin_syntax_5 test cases. Scrap
bin_syntax_6 because it does not longer seems to be relevant.
While we are it, rename the fun_shadow/1 test to size_shadow/1. Also
make sure that the code produces the correct result.
|
|
|
|
|
|
Use case in compile.erl is cryptographical so use
crypto:strong_rand_bytes/1 instead.
Use case in test suite is not cryptographical so use
other test instead.
|
|
When debugging, it is important that we can trust the Core Erlang
pretty printer and Core Erlang parser.
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
Remove the unreachable instructions after a 'raise' instruction
(e.g. a 'jump' or 'deallocate', 'return') to decrease code size.
|
|
compile:forms/1,2 will crash when the current working directory has
been deleted. Fix that problem, and while we are at it, also stop
including {source,""} in module_info() when no source code file is
given.
Reported-at: http://bugs.erlang.org/browse/ERL-113
Reported-by: Adam Lindberg
|
|
Slightly speed up 'erlc' by pre-loading the modules used
by the compiler. Write a test case to ensure that the correct
set of modules are loaded.
|
|
|
|
Consider this code:
%% Start of block
get_tuple_element Tuple 0 Element
get_map_elements Fail Map [Key => Dest]
.
.
.
move Element UltimateDest
%% End of block
Fail:
%% Code that uses Element.
beam_block (more precisely, otp_tuple_element/1) would
incorrectly transform the code to this:
%% Start of block
get_map_elements Fail Map [Key => Dest]
.
.
.
get_tuple_element Tuple 0 UltimateDest
%% End of block
Fail:
%% Code that uses Element.
That is, the code at label Fail would use register Element,
which is either uninitalized or contains the wrong value.
We could fix this problem by always keeping label information
at hand when optimizing blocks so that we could check the code
at the failure label for get_map_elements. That would require
changes to beam_block and beam_utils. We might consider doing
that in the future if it turns out be worth it.
For now, I have decided that I want to keep the simplicity of blocks
(allowing them to be optimized without keeping label information).
That could be achieved by not including get_map_elements in
blocks. Another way, which I have chosen, is to only allow
get_map_elements as the first instruction in the block.
For background on the bug: c288ab8 introduced the beam_reorder pass
and 5f431276 introduced opt_tuple_element() in beam_block.
|
|
The expression in a bit string comprehension is limited to a
literal bit string expression. That is, the following code
is legal:
<< <<X>> || X <- List >>
but not this code:
<< foo(X) || X <- List >>
The limitation is annoying. For one thing, tools that transform
the abstract format must be careful not to produce code such as:
<< begin
%% Some instrumentation code.
<<X>>
end || X <- List >>
One reason for the limitation could be that we'll get
reduce/reduce conflicts if we try to allow an arbitrary
expression in a bit string comprehension:
binary_comprehension -> '<<' expr '||' lc_exprs '>>' :
{bc,?anno('$1'),'$2','$4'}.
Unfortunately, there does not seem to be an easy way to work
around that problem. The best we can do is to allow 'expr_max'
expressions (as in the binary syntax):
binary_comprehension -> '<<' expr_max '||' lc_exprs '>>' :
{bc,?anno('$1'),'$2','$4'}.
That will work, but functions calls must be enclosed in
parentheses:
<< (foo(X)) || X <- List >>
|
|
* bjorn/compiler/modernize-tests:
Remove ?line macros
Replace use of lists:keysearch/3 with lists:keyfind/3
Eliminate use of doc and suite clauses
Replace ?t with test_server
Replace use of test_server:format/2 with io:format/2
Eliminate use of test_server:fail/0,1
Eliminate use of ?config() macro
Modernize use of timetraps
Eliminate useless helper functions
|
|
|
|
|
|
Those clause are obsolete and never used by common_test.
|
|
The macro ?t is deprecated. Replace its use with 'test_server'.
|
|
There is no practial difference.
|
|
|
|
?config is ugly and not recommended. Use proplists:get_value/2
instead.
|
