| Age | Commit message (Collapse) | Author |
|---|
|
ab03678e introduced an optimization in the beam_z pass that could
introduce unreachable code in BEAM files (a 'jump' instruction is
removed after a 'raise' instruction, but the code following the
target of the 'jump' is not removed).
Since this situation happens very rarely, there is no point in adding
another pass that can remove unreachable code after beam_z. Instead we
will make sure that beam_validator can skip the unreachable code.
Skipping unreachable code is already done in valfun_1/2 (for
historical reasons), but we will also need to do it in val_dsetel/2.
|
|
Moving a fun into a guard may cause code that is not accepted
by beam_validator.
|
|
Fix some older errors as well.
|
|
It is not safe to share code between 'catch' blocks.
|
|
beam_block has an optimization that only is safe when it is applied
immediately after code generation. That is pointed out in a comment:
NOTE: Moving allocation instructions is only safe because it is done
immediately after code generation so that we KNOW that if {x,X} is
initialized, all x registers with lower numbers are also initialized.
That assumption may not be true after other optimizations, such as
the beam_utils:live_opt/1 optimization.
The new beam_reorder pass added in OTP 19 runs before beam_block.
Therefore, the optimization is potentially unsafe. The optimization
is also unsafe if compilation is started from assembly code in a
.S file.
Rewrite the optimization to make it safe. See the newly added comment
for details.
ERL-202
|
|
|
|
|
|
This reverts commit 105c5b0071056dc062797e58772e098d2a3a4627.
|
|
The following regression was introduced in 19.0:
foo(bar, <<"x">>) -> 1;
foo(_, <<"x">>) -> 2;
foo(_, <<"y">>) -> 3;
foo(_, _) -> fail.
The call foo(bar,<<"y">>) would errorneous return 'fail' instead of 3.
A testcase in match_SUITE has been added to verify this.
|
|
* aronisstav/compiler/fix-compile-forms-spec/PR-1109:
Fix spec of compile:(noenv_)forms/2
|
|
Any exceptions at this point would be of class error, not exit.
|
|
When the compiler fails to write an output file, it used to just print
"error writing file". With this change, it also prints the error
reason:
$ echo "-module(foo)." > foo.erl
$ chmod -w .
$ erlc foo.erl
/tmp/bar/foo.bea#: error writing file: permission denied
|
|
|
|
The input for a call to compile:(noenv_)forms/2 can also be a cerl
module (useful e.g. to resume with 'from_core' after a 'to_core'
compilation).
Internal representations used for 'from_asm' and 'from_beam'
compilation can also be valid, but have no relevant types defined.
|
|
|
|
retrieve the value of the environment variable ERL_COMPILER_OPTIONS
in the same manner as used by file/2, forms/2 and output_generated/2
|
|
* bjorn/compiler/misc:
misc_SUITE: Cover the remaining lines in beam_peep
Avoid the dreaded "no_file" in warnings
Eliminate crash for map updates in guards
beam_block: Eliminate crash in beam_utils
|
|
* jv/compiler/mapsify-rec_env/PR-1082/OTP-13646:
Convert dict() to map() in rec_env.erl
|
|
|
|
Add more filename/line number annotations while translating to
Core Erlang in v3_core, and ensure that sys_core_fold retains
existing annotations. The goal is to avoid that sys_core_fold
generate warnings with "no_file" instead of a filename.
|
|
beam_validator would complain that x(1) is uninitialized
in a test_heap instruction when attempting to compile
the following code with sys_core_fold turned off:
foo(M) when not (M#{true := 0}); [M] ->
ok.
Simplified, the generated BEAM assembly code looked like
this:
test is_map BadMap x(0)
put_map_exact Fail x(0) => x(1) ...
jump BooleanStuff
BadMap:
move ok => x(1)
jump Fail
BooleanStuff:
...
move Boolean => x(2)
jump Build
Fail:
move false => x(2)
Build:
test_heap 2 3 %% x(0), x(1), x(2) must be live.
...
That is, if put_map_exact failed, control would transfer
to the label Fail without initializing x(1).
Fix that by making sure that x(1) is initilized even if
put_map_exact fails:
test is_map BadMap x(0)
put_map_exact BadLbl x(0) => x(1) ...
jump OkLbl
BadLbl:
move ok => x(1)
jump Fail
OkLbl:
jump BooleanStuff
BadMap:
move ok => x(1)
jump Fail
BooleanStuff:
...
move Boolean => x(2)
jump Build
Fail:
move false => x(2)
Build:
test_heap 2 3 %% x(0), x(1), x(2) must be live.
...
Note that this situation is rare, and that other optimization passes
(beam_dead and beam_jump in particular) will clean up this mess.
|
|
This reverts commit e020f75c10410a6943cd055bfa072a2641eab7da.
|
|
|
|
|
|
Somewhat simplified, beam_block would rewrite the target for
the first instruction in this code sequence:
move x(0) => y(1)
gc_bif '+' 1 x(0) => y(0)
move y(1) => x(1)
move nil => x(0)
call 2 local_function/2
The resulting code would be:
move x(0) => x(1) %% Changed target.
gc_bif '+' 1 x(0) => y(0)
move x(1) => y(1) %% Operands swapped (see 02d6135813).
move nil => x(0)
call 2 local_function/2
The resulting code is not safe because the x(1) will be killed
by the gc_bif instruction.
7a47b20c3a cleaned up move optimizations and would reject the
optimization if the target was an X register and an allocating
instruction was found. To avoid this bug, the optimization must be
rejected even if the target is a Y register.
|
|
|
|
We want to find bugs in the compiler during compilation. Validation of
match contexts was weak, which could allow serious bugs in the
generated code to slip through.
|
|
Using a record will make it much easier to add additional information.
|
|
* bjorn/compiler/misc:
Eliminate unsafe use of Y registers
beam_validator: Add is_bitstring/1 as a safe BIF
beam_validator: Remove uncovered line
Teach beam_utils:is_pure_test/1 to handle is_bitstr and is_function2
beam_utils: Simplify handling of 'return' to eliminate uncovered line
beam_jump: Clean up handling of labels before func_info
beam_expect: Correctly handle blocks with multiple allocs
v3_codegen: Don't confuse beam_validator
v3_codegen: Correct code generation for an error/1 call in a guard
beam_receive: Don't crash when encountering nonsensical code
|
|
If the Core Erlang optimization were turned off (using no_copt),
the optimization passes for Beam assembly could generate unsafe
code that did not initialize all Y registers before (for example)
a call instruction.
To fix this, beam_dead should not attempt to remove stores to Y
registers. That is not safe if there is an exception-generating
instruction inside a try...catch block.
|
|
beam_validator wrongly complained that the following was
not safe because it didn't know that is_bitstring/1 is safe:
food(Curriculum) ->
[try
is_bitstring(functions)
catch _ ->
0
end, Curriculum].
While we are it, also add a new bif_SUITE test suite to cover some
more code in beam_validator.
|
|
The raise/3 instruction is specially handled, thus there is no need
for bif_type/3 to handle raise/3 (also, the number of arguments was
incorrect, so it could never have matched).
|
|
The 'is_bitstr' and 'is_function2' tests are pure. The corresponding BIFs
have different names; thus the default call to erl_internal:new_type_test/2
is not sufficient.
|
|
This shuts off compiler warnings and will allow to enable stronger
compiler checks files that include beam_disasm.hrl in the hipe
application.
While doing that, also modified a comment in the header file and
turned a case statement into effectively an assertion: there should
not really be any beam files where functions do not have a label as
entry point, right?
|
|
Y registers are killed by the deallocate/1 instruction, so there is no
need to handle Y register in the return/1 instruction in
check_liveness/3.
There is also no need to keep check_liveness_live_ret/3 since it
is only used in one place.
|
|
In complicated code with many indirect jumps to the func_info label,
a label could get lost.
|
|
A negative allocation could be calculated if a block had multiple
allocations. Make sure to process the block in the right order
so that the correct allocation is processed. Also add an assertion.
This bug was often not noticed because beam_type usually silently
recalculates the allocation amount in test_heap/2 instructions.
|
|
Generate code that not only is safe, but can easily be seen by
beam_validator to be safe.
|
|
Sometimes v3_codegen would generate unsafe code when there was
a call to error/1 in a guard.
|
|
|
|
* kostis/compiler/v3_kernel/eta-conversion:
v3_kernel: Fix typo in comment
|
|
|
|
* bjorn/compiler/misc:
beam_bool_SUITE: Cover one more line
beam_utils_SUITE: Cover more lines in beam_utils
beam_reorder: Don't confuse beam_validator
beam_bool: Reject potentially unsafe optimization
v3_core: Don't depend on sys_core_fold for cleaning up
beam_type: Eliminate crash
beam_type: Correct handling of setelement/3
beam_validator: Handle cons literals better
beam_validator: Keep better track of tuple literals
|
|
|
|
By first adding a call to error/1 to each uncovered line,
QuickCheck could find test cases that would cover the lines.
|
|
Make sure we don't optimize code such as:
is_tuple Fail Src
test_arity Fail Src Arity
get_tuple_element Src Pos Dst
is_map Fail Src
If we would reorder the instructions like this:
is_tuple Fail Src
test_arity Fail Src Arity
is_map Fail Src
get_tuple_element Src Pos Dst
beam_validator would complain that the type for Src is a map
instead of a tuple. Since the code has problems to begin with,
there is no need to do the optimization.
|
|
When calculating the sets of registers that must be killed or
unused, registers set in a {protected,_,_,_} block were not
considered. That could result in a crash in the
assertion in beam_utils:live_opt_block/4.
|
|
a3ec2644f5 attempted to teach v3_core not to generate code with
unbound variables. The approach taken in that commit is to
discard all expressions following a badmatch. That does not
work if the badmatch is nested:
{[V] = [] = foo,V},
V
That would be rewritten to:
{error({badmatch,foo})},
V
where V is unbound.
If we were to follow the same approach, the tuple construction
code would have to look out for a badmatch. As would list construction,
begin...end, and so on.
Therefore, as it is impractical to discard all expressions that
follow a badmatch, the only other solution is to ensure that the
variables that the pattern binds will somehow be bound. That can
be arranged by rewriting the pattern to a pattern that binds the
same variables. Thus:
error({badmatch,foo}),
E = foo,
case E of
{[V],[]} ->
V;
Other ->
error({badmatch,Other}
end
|
|
The following code:
simple() ->
case try 0 after [] end of
0 -> college;
1 -> 0
end.
would crash the compiler like this:
crash reason: {case_clause,
{'EXIT',
{function_clause,
[{beam_type,simplify_select_val_int,
[{select,select_val,
{x,0},
{f,7},
[{integer,1},{f,9},{integer,0},{f,8}]},
0],
[{file,"beam_type.erl"},{line,169}]},
{beam_type,simplify_basic_1,3,
[{file,"beam_type.erl"},{line,155}]},
{beam_type,opt,3,[{file,"beam_type.erl"},{line,57}]},
{beam_type,function,1,[{file,"beam_type.erl"},{line,36}]},
{beam_type,'-module/2-lc$^0/1-0-',1,
[{file,"beam_type.erl"},{line,30}]},
{beam_type,module,2,[{file,"beam_type.erl"},{line,30}]},
{compile,'-select_passes/2-anonymous-2-',2,
[{file,"compile.erl"},{line,521}]},
{compile,'-internal_comp/4-anonymous-1-',2,
[{file,"compile.erl"},{line,306}]}]}}}
The root cause is that the type representation is not well-defined.
Integers could be represented in three different ways:
integer
{integer,{1,10}}
{integer,0}
However, only the first two forms were handled.
To avoid similar problems in the future:
* Make the type representation stricter. Make sure that integers are
only represented as 'integer' or {integer,{Min,Max}}.
* Call verify_type/1 whenever a new type is added (not only when
merging types) to ensure that only the supported types are added
to the type database).
(ERL-150)
|
|
We must be careful how we treat the type info for the result of:
setelement(Index, Tuple, NewValue)
If Tuple had type information, the result of setelement/3 (in x(0))
would be assigned the same type information. But that is not safe
for:
setelement(1, Tuple, NewValue)
since the type for the first element will be changed.
Therefore, we must take care to remove the type information for
the first element of the tuple if might have been modified by
setelement/3.
|
