| Age | Commit message (Collapse) | Author |
|---|
|
The misc_SUITE:integer_encoding/1 test case is annoyingly slow.
Rewrite the encoding of integers in beam_asm to use the
binary:encode_unsigned/1 BIF.
Also tweak the test case itself. Scale the down the maximum
size of the numbers being generated, but also add test of
numbers around boundaries of power of two (which are the numbers
most likely to expose bugs in the encoding).
|
|
It is not necessary to compile the compile three times. After the
second compilation, we compare the generated .beam files with the
.beam files that were used when compiling them. Doing one more
round will not find more bugs.
While we are it, remove the ?line macros and the unused make_current/1
function.
|
|
The test suites generates listing files, so we can slightly speed
up running of test suites (especially when running 'cover') by
optimizing writing of .S files.
|
|
|
|
Using 'try'...'catch' simplifies the code and improves coverage
because we don't have to re-throw accidentally caught errors.
|
|
86fbd6d76d strengthened type optimization in lets. As a result of
the stronger optimizations, special care had to be taken to
suppress false warnings.
It turns out that false warnings can still slip through. Slapping
on a 'compiler_generated' annotation at the top-level of a
complex term such as #c_tuple{} may not suppress all warnings.
We will need to go deeper into the term to eliminate all warnings.
|
|
Understanding get_map_elements improves the stack trimming done
by beam_trim.
|
|
|
|
beam_utils used to be overly conservative about liveness for
exit instructions such as:
call_ext erlang:exit/1
beam_utils would consider all y registers to be used, to avoid
overwriting a catch or try tag. That does not seem to be a real
risk.
However, we miss opportunities for stack trimming if we consider
y registers used by an exit instruction.
|
|
The run-time system stopped paying attention the 'aligned' flag in bit
syntax construction and matching when bitstrings were introduced in
language.
The beam_asm compiler pass will crash if the 'aligned' flag is given
in bit syntax instructions.
beam_validator still validates the 'aligned' flag. Before
912fea0b712a (which removed the possibility to validate existing
BEAM files), the 'aligned' flag could actually be encountered
when validating a BEAM file.
Since the validation of 'aligned' no longer serves any useful
purpose, remove the validation code.
|
|
set_type_y/3 is far too complicated. Note that we don't need to check
the #st.numy field, because we will detect the error anyway because
the information for the y register will be missing in the #st.y
gb_tree.
There is also a clause that would never match because of a spelling
error (the first "n" was missing in "uninitialized"). That clause
is not needed because the default clause will do fine.
Furthermore, we can break out the special case for handling catch_end
and similar instructions into a new function.
|
|
The fault/1,2 BIF was removed a long time ago.
|
|
When merging two states, the following fields should be merged
between the states: #st.x, #st.y, #st.numy, #st.ct. Everything
else should be set to the default values in a new state.
|
|
When merging y registers, only the y registers that are found in
both states should be retained.
|
|
The compile, bitdefault, and bittypes records are not really used
in the #expand{} record.
|
|
Updating of the variable data base takes most of the time.
|
|
The use of lists:dropwhile/2 is noticeable in the eprof results.
|
|
|
|
lists:dropwhile/2 and the fun in btb_index_1/2 shows up in the
top 10 list of eprof. Replace dropwhile with a special-purpose
function for a tiny increase in speed.
|
|
Profiling shows that the excution time for checkerror_1/2 could
be be near the top even for modules without any floating point
operations.
It turns out that the complexity of simplify_float_1/4 is quadratic.
checkerror/1 is called with the growing accumulator for each
iteration. checkerror/1 will traverse the entire accumulated list
*unless* some floating point operations are used.
We can avoid this situation if we only call checkerror/1 when there
are live floating point registers. We can also avoid calling flush/3
if there are no live floating point registers.
|
|
The execution time for beam_utils:index_labels_1/2 is among
the longest in the beam_bool, beam_bsm, beam_receive, and
beam_trim compiler passes. Therefore it is worthwhile to do
the minor optimization of replacing a call to lists:dropwhile/2
with a special-purpose drop_labels function.
|
|
When matching a binary literal as in:
<<"abc">> = Bin
the compiler will produce a sequence of three instructions
(some details in the instructions removed for simplicity):
bs_start_match2 Fail BinReg CtxtReg
bs_match_string Fail CtxtReg "abc"
bs_test_tail2 Fail CtxtReg 0
The sequence can be replaced with:
is_eq_exact Fail BinReg "abc"
|
|
The actual bs_match_string instruction has four operands:
bs_match_string {f,Lbl} Ctxt NumBits {string,ListOfBytes}
However, v3_codegen emits a more compact representation where
the bits to match are packaged in a bitstring:
bs_match_string {f,Lbl} Ctxt Bitstring
Currently, beam_clean:clean_labels/1 will rewrite the compact
representation to the final representation. That is unfortunate
since clean_labels/1 is called by beam_dead, which means that
the less compact representation will be introduced long before
it is actually needed by beam_asm. It will also complicate any
optimizations that we might want to do.
Move the rewriting of bs_match_string from beam_clean:clean_labels/1
to the beam_z pass, which is the last pass executed before
beam_validator and beam_asm.
|
|
Commit b76588fb5a introduced an optimization of the compile time of
huge functions with many bs_match_string instructions. The
optimization is done in two passes. The first pass coalesces adjacent
bs_match_string instructions. To avoid copying bitstrings multiple
times, the bitstrings in the instructions are combined in to a (deep)
list. The second pass goes through all instructions in the function
and combines the list of bitstrings to a single bitstring in all
bs_match_string instructions.
The second pass (fix_bs_match_string) is run on all instructions in
each function, even if there are no bs_match_instructions in the
function. While fix_bs_match_string is not a bottleneck (it is a
linear pass), its execution time is noticeable when profiling some
modules.
Move the execution of the second pass to the select_binary()
function so that it will only be executed for instructions that
do binary matching. Also take the opportunity to optimize away
uses of bs_restore2 that occour directly after a bs_save2. That
optimimization is currently done in beam_block, but it can be
done essentially for free in the same pass that fixes up
bs_match_string instructions.
|
|
Profiling shows that the execution time for "turning" y registers
is noticeable for some modules (e.g. S1AP-PDU-Contents from the
asn1 test suite). We can reduce the impact on running time by
special-casing important instructions. In particular, there is
no need to look for y registers in the list argument for a
select_val instruction.
|
|
Profiling shows that subst_vsub/3 dominates the running time. It
is therefore worthwhile optimizing it.
|
|
To run eprof for a compiler pass:
erlc +'{eprof,beam_asm}' file.erl
The name of the compiler pass is the name as printed when
'time' option is used. It is usually, but not always, the module
name for the compiler pass.
|
|
Several compiler passes have unnecessary wrapper functions that
can be easily eliminated.
|
|
If we want to have test cases that run eprof, we must make sure that
there are no modules loaded that don't have a working module_info/1
function, since eprof calls module_info(functions) to retrieve the
list of functions in the module. Some test cases load modules compiled
from Core Erlang that don't have any module_info/1 functions, so
we will need make sure that all such modules have been unloaded.
Add z_SUITE:loaded/1 to run after all other test cases to verify that
all modules that the code server consider loaded are indeed loaded and
all have working module_info/0,1 functions.
|
|
For tidiness, always place .core files in data directories.
|
|
The .core or .S files that are compiled in the test cases
may lack module_info/0,1 functions, which will cause problems if
we (for example) try to run eprof later. To avoid that problem,
unload each module directly after testing it.
|
|
Don't unload modules using BIFs; use the code server to ensure
that code:all_loaded/0 only lists code that is actually loaded.
|
|
According to EEP-43 for maps, a 'badmap' exception should be
generated when an attempt is made to update non-map term such as:
<<>>#{a=>42}
That was not implemented in the OTP 17.
José Valim suggested that we should take the opportunity to
improve the errors coming from map operations:
http://erlang.org/pipermail/erlang-questions/2015-February/083588.html
This commit implement better errors from map operations similar
to his suggestion.
When a map update operation (Map#{...}) or a BIF that expects a map
is given a non-map term, the exception will be:
{badmap,Term}
This kind of exception is similar to the {badfun,Term} exception
from operations that expect a fun.
When a map operation requires a key that is not present in a map,
the following exception will be raised:
{badkey,Key}
José Valim suggested that the exception should be
{badkey,Key,Map}. We decided not to do that because the map
could potentially be huge and cause problems if the error
propagated through links to other processes.
For BIFs, it could be argued that the exceptions could be simply
'badmap' and 'badkey', because the bad map and bad key can be found in
the argument list for the BIF in the stack backtrace. However, for the
map update operation (Map#{...}), the bad map or bad key will not be
included in the stack backtrace, so that information must be included
in the exception reason itself. For consistency, the BIFs should raise
the same exceptions as update operation.
If more than one key is missing, it is undefined which of
keys that will be reported in the {badkey,Key} exception.
|
|
It is no longer necessary to sort the keys, since the loader
does the sorting.
|
|
The BEAM loader will now sort keys for maps during loading, so
beam_validator should not require the keys to be ordered any order.
However, we must still ensure that literals keys are unique (which
was implicitly guaranteed by the strict ordering requirement).
|
|
To be sure that the compiler and BEAM virtual machine correctly
handles literals maps, we must test it.
|
|
=== OTP-17.5 ===
Changed Applications:
- asn1-3.0.4
- common_test-1.10
- compiler-5.0.4
- crypto-3.5
- debugger-4.0.3
- dialyzer-2.7.4
- diameter-1.9
- eldap-1.1.1
- erts-6.4
- hipe-3.11.3
- inets-5.10.6
- kernel-3.2
- mnesia-4.12.5
- observer-2.0.4
- os_mon-2.3.1
- public_key-0.23
- runtime_tools-1.8.16
- ssh-3.2
- ssl-6.0
- stdlib-2.4
- syntax_tools-1.6.18
- test_server-3.8
- tools-2.7.2
- wx-1.3.3
Unchanged Applications:
- cosEvent-2.1.15
- cosEventDomain-1.1.14
- cosFileTransfer-1.1.16
- cosNotification-1.1.21
- cosProperty-1.1.17
- cosTime-1.1.14
- cosTransactions-1.2.14
- edoc-0.7.16
- erl_docgen-0.3.7
- erl_interface-3.7.20
- et-1.5
- eunit-2.2.9
- gs-1.5.16
- ic-4.3.6
- jinterface-1.5.12
- megaco-3.17.3
- odbc-2.10.22
- orber-3.7.1
- ose-1.0.2
- otp_mibs-1.0.10
- parsetools-2.0.12
- percept-0.8.10
- reltool-0.6.6
- sasl-2.4.1
- snmp-5.1.1
- typer-0.9.8
- webtool-0.8.10
- xmerl-1.3.7
Conflicts:
OTP_VERSION
erts/vsn.mk
lib/ssl/vsn.mk
|
|
|
|
|
|
|
|
* bjorn/doc:
cerl_trees: Fix incorrect EDoc reference to the cerl module
cerl: Correct incorrect EDoc references
|
|
|
|
* rickard/time_api/OTP-11997: (22 commits)
Update primary bootstrap
inets: Suppress deprecated warning on erlang:now/0
inets: Cleanup of multiple copies of functions Add inets_lib with common functions used by multiple modules
inets: Update comments
Suppress deprecated warning on erlang:now/0
Use new time API and be back-compatible in inets Remove unused functions and removed redundant test
asn1 test SUITE: Eliminate use of now/0
Disable deprecated warning on erlang:now/0 in diameter_lib
Use new time API and be back-compatible in ssh
Replace all calls to now/0 in CT with new time API functions
test_server: Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
otp_SUITE: Warn for calls to erlang:now/0
Replace usage of erlang:now() with usage of new API
Multiple timer wheels
Erlang based BIF timer implementation for scalability
Implement ethread events with timeout
...
Conflicts:
bootstrap/bin/start.boot
bootstrap/bin/start_clean.boot
bootstrap/lib/compiler/ebin/beam_asm.beam
bootstrap/lib/compiler/ebin/compile.beam
bootstrap/lib/kernel/ebin/auth.beam
bootstrap/lib/kernel/ebin/dist_util.beam
bootstrap/lib/kernel/ebin/global.beam
bootstrap/lib/kernel/ebin/hipe_unified_loader.beam
bootstrap/lib/kernel/ebin/inet_db.beam
bootstrap/lib/kernel/ebin/inet_dns.beam
bootstrap/lib/kernel/ebin/inet_res.beam
bootstrap/lib/kernel/ebin/os.beam
bootstrap/lib/kernel/ebin/pg2.beam
bootstrap/lib/stdlib/ebin/dets.beam
bootstrap/lib/stdlib/ebin/dets_utils.beam
bootstrap/lib/stdlib/ebin/erl_tar.beam
bootstrap/lib/stdlib/ebin/escript.beam
bootstrap/lib/stdlib/ebin/file_sorter.beam
bootstrap/lib/stdlib/ebin/otp_internal.beam
bootstrap/lib/stdlib/ebin/qlc.beam
bootstrap/lib/stdlib/ebin/random.beam
bootstrap/lib/stdlib/ebin/supervisor.beam
bootstrap/lib/stdlib/ebin/timer.beam
erts/aclocal.m4
erts/emulator/beam/bif.c
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_db_hash.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_thr_progress.c
erts/emulator/beam/utils.c
erts/emulator/sys/unix/sys.c
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/init.beam
erts/preloaded/src/erts_internal.erl
lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl
lib/diameter/src/base/diameter_lib.erl
lib/kernel/src/os.erl
lib/ssh/test/ssh_basic_SUITE.erl
system/doc/efficiency_guide/advanced.xml
|
|
|
|
Change c_nil/1 to c_nil/0.
Change c_try/3 to c_try/5.
Change c_var_name/1 to var_name/1.
|
|
* egil/maps/hamt/OTP-12585: (113 commits)
erts: Fix bug in ESTACK and WSTACK
kernel: Add spec for erts_debug:map_info/1
mnesia: Update mnesia tests to reflect new ETS hash
erts: Ensure maps uses _rel functions in halfword
erts: Do not treat errors as fatal in erl_printf_term
erts: Update preloaded erts_internal.beam
erts: Add map decomposition wrappers
erts: Ensure halfword has correct temp-heap for maps
hipe: Handle separate hashmap tag correctly
erts: Fix map bug in dec_term for 32-bit debug VM
stdlib: Update qlc tests to reflect new ETS hash
stdlib: Remove obsolete hashmap references in io_lib
erts: Enhance maps ordering tests
hipe: Fix maps sort order testcase
erts: Remove unused variable in crashdump creation
erts: Fix typo in copy_struct for halfword emulator
erts: Restrict GCC intrinsics by compiler version
erts: Fix windows bug in hashmap_info
erts: Fix typo in make_hash2 for 32-bit arch
Fix beam_load assert
...
Conflicts:
erts/emulator/beam/bif.tab
|
|
where key 1 is less than key 1.0
|
|
For unclear reasons, there are two functions in v3_life that are
almost identical: literal/2 and literal2/2. literal/2 is used
for expressions and literal2/2 for patterns.
It turns out that literal2/2 can do everything that literal/2 can
do, except that it transforms maps differently.
If we adjust v3_codegen to accept the same format of maps in
expressions and patterns, we can rename literal2/2 to literal/2
and use it for expressions and patterns.
|
|
v3_codegen puts the compilation in the process dictionary, but
never uses them.
|
|
Inlining the core_parse module is slow (the inline pass alone
takes more than 6 seconds on my computer) and has no benefit.
|
