aboutsummaryrefslogtreecommitdiffstats
path: root/lib/compiler
AgeCommit message (Collapse)Author
2016-09-13beam_validator: Handle unreachable instructionsBjörn Gustavsson
ab03678e introduced an optimization in the beam_z pass that could introduce unreachable code in BEAM files (a 'jump' instruction is removed after a 'raise' instruction, but the code following the target of the 'jump' is not removed). Since this situation happens very rarely, there is no point in adding another pass that can remove unreachable code after beam_z. Instead we will make sure that beam_validator can skip the unreachable code. Skipping unreachable code is already done in valfun_1/2 (for historical reasons), but we will also need to do it in val_dsetel/2.
2016-09-05sys_core_fold: Don't move a fun into a guardBjörn Gustavsson
Moving a fun into a guard may cause code that is not accepted by beam_validator.
2016-09-01doc: Correct errors introduced by Editorial changesHans Bolinder
Fix some older errors as well.
2016-08-11[ERL-209] Fix ambiguous_catch_try_state inconsistency errorBjörn Gustavsson
It is not safe to share code between 'catch' blocks.
2016-08-05beam_block: Fix potentially unsafe optimization in move_allocates/1Björn Gustavsson
beam_block has an optimization that only is safe when it is applied immediately after code generation. That is pointed out in a comment: NOTE: Moving allocation instructions is only safe because it is done immediately after code generation so that we KNOW that if {x,X} is initialized, all x registers with lower numbers are also initialized. That assumption may not be true after other optimizations, such as the beam_utils:live_opt/1 optimization. The new beam_reorder pass added in OTP 19 runs before beam_block. Therefore, the optimization is potentially unsafe. The optimization is also unsafe if compilation is started from assembly code in a .S file. Rewrite the optimization to make it safe. See the newly added comment for details. ERL-202
2016-07-15Merge branch 'maint-19' into maintBjörn-Egil Dahlberg
2016-07-14Prepare releaseErlang/OTP
2016-07-12Revert "beam_dead: Improve optimization of literal binary matching"Björn-Egil Dahlberg
This reverts commit 105c5b0071056dc062797e58772e098d2a3a4627.
2016-07-12compiler: Test literal binary matchingBjörn-Egil Dahlberg
The following regression was introduced in 19.0: foo(bar, <<"x">>) -> 1; foo(_, <<"x">>) -> 2; foo(_, <<"y">>) -> 3; foo(_, _) -> fail. The call foo(bar,<<"y">>) would errorneous return 'fail' instead of 3. A testcase in match_SUITE has been added to verify this.
2016-06-30Merge branch 'aronisstav/compiler/fix-compile-forms-spec/PR-1109' into maintBjörn Gustavsson
* aronisstav/compiler/fix-compile-forms-spec/PR-1109: Fix spec of compile:(noenv_)forms/2
2016-06-23Fix try-catch when writing makefileMagnus Henoch
Any exceptions at this point would be of class error, not exit.
2016-06-22Show error reason when compiler cannot write fileMagnus Henoch
When the compiler fails to write an output file, it used to just print "error writing file". With this change, it also prints the error reason: $ echo "-module(foo)." > foo.erl $ chmod -w . $ erlc foo.erl /tmp/bar/foo.bea#: error writing file: permission denied
2016-06-21Prepare releaseErlang/OTP
2016-06-20Fix spec of compile:(noenv_)forms/2Stavros Aronis
The input for a call to compile:(noenv_)forms/2 can also be a cerl module (useful e.g. to resume with 'from_core' after a 'to_core' compilation). Internal representations used for 'from_asm' and 'from_beam' compilation can also be valid, but have no relevant types defined.
2016-06-08compile.xml: Eliminate unsightly space before periodBjörn Gustavsson
2016-06-07Compiler: new function env_compiler_options/0alisdair sullivan
retrieve the value of the environment variable ERL_COMPILER_OPTIONS in the same manner as used by file/2, forms/2 and output_generated/2
2016-06-03Merge branch 'bjorn/compiler/misc'Björn Gustavsson
* bjorn/compiler/misc: misc_SUITE: Cover the remaining lines in beam_peep Avoid the dreaded "no_file" in warnings Eliminate crash for map updates in guards beam_block: Eliminate crash in beam_utils
2016-06-03Merge branch 'jv/compiler/mapsify-rec_env/PR-1082/OTP-13646'Björn-Egil Dahlberg
* jv/compiler/mapsify-rec_env/PR-1082/OTP-13646: Convert dict() to map() in rec_env.erl
2016-06-03misc_SUITE: Cover the remaining lines in beam_peepBjörn Gustavsson
2016-06-02Avoid the dreaded "no_file" in warningsBjörn Gustavsson
Add more filename/line number annotations while translating to Core Erlang in v3_core, and ensure that sys_core_fold retains existing annotations. The goal is to avoid that sys_core_fold generate warnings with "no_file" instead of a filename.
2016-06-02Eliminate crash for map updates in guardsBjörn Gustavsson
beam_validator would complain that x(1) is uninitialized in a test_heap instruction when attempting to compile the following code with sys_core_fold turned off: foo(M) when not (M#{true := 0}); [M] -> ok. Simplified, the generated BEAM assembly code looked like this: test is_map BadMap x(0) put_map_exact Fail x(0) => x(1) ... jump BooleanStuff BadMap: move ok => x(1) jump Fail BooleanStuff: ... move Boolean => x(2) jump Build Fail: move false => x(2) Build: test_heap 2 3 %% x(0), x(1), x(2) must be live. ... That is, if put_map_exact failed, control would transfer to the label Fail without initializing x(1). Fix that by making sure that x(1) is initilized even if put_map_exact fails: test is_map BadMap x(0) put_map_exact BadLbl x(0) => x(1) ... jump OkLbl BadLbl: move ok => x(1) jump Fail OkLbl: jump BooleanStuff BadMap: move ok => x(1) jump Fail BooleanStuff: ... move Boolean => x(2) jump Build Fail: move false => x(2) Build: test_heap 2 3 %% x(0), x(1), x(2) must be live. ... Note that this situation is rare, and that other optimization passes (beam_dead and beam_jump in particular) will clean up this mess.
2016-06-02Revert "Prepare release"Erlang/OTP
This reverts commit e020f75c10410a6943cd055bfa072a2641eab7da.
2016-06-02Prepare releaseErlang/OTP
2016-06-01Convert dict() to map() in rec_env.erlJosé Valim
2016-06-01beam_block: Eliminate crash in beam_utilsBjörn Gustavsson
Somewhat simplified, beam_block would rewrite the target for the first instruction in this code sequence: move x(0) => y(1) gc_bif '+' 1 x(0) => y(0) move y(1) => x(1) move nil => x(0) call 2 local_function/2 The resulting code would be: move x(0) => x(1) %% Changed target. gc_bif '+' 1 x(0) => y(0) move x(1) => y(1) %% Operands swapped (see 02d6135813). move nil => x(0) call 2 local_function/2 The resulting code is not safe because the x(1) will be killed by the gc_bif instruction. 7a47b20c3a cleaned up move optimizations and would reject the optimization if the target was an X register and an allocating instruction was found. To avoid this bug, the optimization must be rejected even if the target is a Y register.
2016-05-31Add additional coverage and smoke test of beam_validatorBjörn Gustavsson
2016-05-31beam_validator: Strengthen validation of match statesBjörn Gustavsson
We want to find bugs in the compiler during compilation. Validation of match contexts was weak, which could allow serious bugs in the generated code to slip through.
2016-05-31beam_validator: Use a record representing the match contextBjörn Gustavsson
Using a record will make it much easier to add additional information.
2016-05-31Merge branch 'bjorn/compiler/misc'Björn Gustavsson
* bjorn/compiler/misc: Eliminate unsafe use of Y registers beam_validator: Add is_bitstring/1 as a safe BIF beam_validator: Remove uncovered line Teach beam_utils:is_pure_test/1 to handle is_bitstr and is_function2 beam_utils: Simplify handling of 'return' to eliminate uncovered line beam_jump: Clean up handling of labels before func_info beam_expect: Correctly handle blocks with multiple allocs v3_codegen: Don't confuse beam_validator v3_codegen: Correct code generation for an error/1 call in a guard beam_receive: Don't crash when encountering nonsensical code
2016-05-30Eliminate unsafe use of Y registersBjörn Gustavsson
If the Core Erlang optimization were turned off (using no_copt), the optimization passes for Beam assembly could generate unsafe code that did not initialize all Y registers before (for example) a call instruction. To fix this, beam_dead should not attempt to remove stores to Y registers. That is not safe if there is an exception-generating instruction inside a try...catch block.
2016-05-30beam_validator: Add is_bitstring/1 as a safe BIFBjörn Gustavsson
beam_validator wrongly complained that the following was not safe because it didn't know that is_bitstring/1 is safe: food(Curriculum) -> [try is_bitstring(functions) catch _ -> 0 end, Curriculum]. While we are it, also add a new bif_SUITE test suite to cover some more code in beam_validator.
2016-05-30beam_validator: Remove uncovered lineBjörn Gustavsson
The raise/3 instruction is specially handled, thus there is no need for bif_type/3 to handle raise/3 (also, the number of arguments was incorrect, so it could never have matched).
2016-05-30Teach beam_utils:is_pure_test/1 to handle is_bitstr and is_function2Björn Gustavsson
The 'is_bitstr' and 'is_function2' tests are pure. The corresponding BIFs have different names; thus the default call to erl_internal:new_type_test/2 is not sufficient.
2016-05-27Declare the type of function entry pointsKostis Sagonas
This shuts off compiler warnings and will allow to enable stronger compiler checks files that include beam_disasm.hrl in the hipe application. While doing that, also modified a comment in the header file and turned a case statement into effectively an assertion: there should not really be any beam files where functions do not have a label as entry point, right?
2016-05-25beam_utils: Simplify handling of 'return' to eliminate uncovered lineBjörn Gustavsson
Y registers are killed by the deallocate/1 instruction, so there is no need to handle Y register in the return/1 instruction in check_liveness/3. There is also no need to keep check_liveness_live_ret/3 since it is only used in one place.
2016-05-25beam_jump: Clean up handling of labels before func_infoBjörn Gustavsson
In complicated code with many indirect jumps to the func_info label, a label could get lost.
2016-05-25beam_expect: Correctly handle blocks with multiple allocsBjörn Gustavsson
A negative allocation could be calculated if a block had multiple allocations. Make sure to process the block in the right order so that the correct allocation is processed. Also add an assertion. This bug was often not noticed because beam_type usually silently recalculates the allocation amount in test_heap/2 instructions.
2016-05-25v3_codegen: Don't confuse beam_validatorBjörn Gustavsson
Generate code that not only is safe, but can easily be seen by beam_validator to be safe.
2016-05-25v3_codegen: Correct code generation for an error/1 call in a guardBjörn Gustavsson
Sometimes v3_codegen would generate unsafe code when there was a call to error/1 in a guard.
2016-05-25beam_receive: Don't crash when encountering nonsensical codeBjörn Gustavsson
2016-05-25Merge branch 'kostis/compiler/v3_kernel/eta-conversion'Björn Gustavsson
* kostis/compiler/v3_kernel/eta-conversion: v3_kernel: Fix typo in comment
2016-05-23v3_kernel: Fix typo in commentKostis Sagonas
2016-05-23Merge branch 'bjorn/compiler/misc'Björn Gustavsson
* bjorn/compiler/misc: beam_bool_SUITE: Cover one more line beam_utils_SUITE: Cover more lines in beam_utils beam_reorder: Don't confuse beam_validator beam_bool: Reject potentially unsafe optimization v3_core: Don't depend on sys_core_fold for cleaning up beam_type: Eliminate crash beam_type: Correct handling of setelement/3 beam_validator: Handle cons literals better beam_validator: Keep better track of tuple literals
2016-05-23beam_bool_SUITE: Cover one more lineBjörn Gustavsson
2016-05-23beam_utils_SUITE: Cover more lines in beam_utilsBjörn Gustavsson
By first adding a call to error/1 to each uncovered line, QuickCheck could find test cases that would cover the lines.
2016-05-23beam_reorder: Don't confuse beam_validatorBjörn Gustavsson
Make sure we don't optimize code such as: is_tuple Fail Src test_arity Fail Src Arity get_tuple_element Src Pos Dst is_map Fail Src If we would reorder the instructions like this: is_tuple Fail Src test_arity Fail Src Arity is_map Fail Src get_tuple_element Src Pos Dst beam_validator would complain that the type for Src is a map instead of a tuple. Since the code has problems to begin with, there is no need to do the optimization.
2016-05-23beam_bool: Reject potentially unsafe optimizationBjörn Gustavsson
When calculating the sets of registers that must be killed or unused, registers set in a {protected,_,_,_} block were not considered. That could result in a crash in the assertion in beam_utils:live_opt_block/4.
2016-05-23v3_core: Don't depend on sys_core_fold for cleaning upBjörn Gustavsson
a3ec2644f5 attempted to teach v3_core not to generate code with unbound variables. The approach taken in that commit is to discard all expressions following a badmatch. That does not work if the badmatch is nested: {[V] = [] = foo,V}, V That would be rewritten to: {error({badmatch,foo})}, V where V is unbound. If we were to follow the same approach, the tuple construction code would have to look out for a badmatch. As would list construction, begin...end, and so on. Therefore, as it is impractical to discard all expressions that follow a badmatch, the only other solution is to ensure that the variables that the pattern binds will somehow be bound. That can be arranged by rewriting the pattern to a pattern that binds the same variables. Thus: error({badmatch,foo}), E = foo, case E of {[V],[]} -> V; Other -> error({badmatch,Other} end
2016-05-23beam_type: Eliminate crashBjörn Gustavsson
The following code: simple() -> case try 0 after [] end of 0 -> college; 1 -> 0 end. would crash the compiler like this: crash reason: {case_clause, {'EXIT', {function_clause, [{beam_type,simplify_select_val_int, [{select,select_val, {x,0}, {f,7}, [{integer,1},{f,9},{integer,0},{f,8}]}, 0], [{file,"beam_type.erl"},{line,169}]}, {beam_type,simplify_basic_1,3, [{file,"beam_type.erl"},{line,155}]}, {beam_type,opt,3,[{file,"beam_type.erl"},{line,57}]}, {beam_type,function,1,[{file,"beam_type.erl"},{line,36}]}, {beam_type,'-module/2-lc$^0/1-0-',1, [{file,"beam_type.erl"},{line,30}]}, {beam_type,module,2,[{file,"beam_type.erl"},{line,30}]}, {compile,'-select_passes/2-anonymous-2-',2, [{file,"compile.erl"},{line,521}]}, {compile,'-internal_comp/4-anonymous-1-',2, [{file,"compile.erl"},{line,306}]}]}}} The root cause is that the type representation is not well-defined. Integers could be represented in three different ways: integer {integer,{1,10}} {integer,0} However, only the first two forms were handled. To avoid similar problems in the future: * Make the type representation stricter. Make sure that integers are only represented as 'integer' or {integer,{Min,Max}}. * Call verify_type/1 whenever a new type is added (not only when merging types) to ensure that only the supported types are added to the type database). (ERL-150)
2016-05-20beam_type: Correct handling of setelement/3Björn Gustavsson
We must be careful how we treat the type info for the result of: setelement(Index, Tuple, NewValue) If Tuple had type information, the result of setelement/3 (in x(0)) would be assigned the same type information. But that is not safe for: setelement(1, Tuple, NewValue) since the type for the first element will be changed. Therefore, we must take care to remove the type information for the first element of the tuple if might have been modified by setelement/3.