aboutsummaryrefslogtreecommitdiffstats
path: root/lib/diameter/include
AgeCommit message (Collapse)Author
2015-04-03Remove extra avp bit from diameter_avp decodeAnders Svensson
In the case of a faulty AVP Length (pointing past the end of a message or not spanning the header), an extra bit is prepended to data bytes in diameter_avp:collect_avps/1 in order to force a 5014 decode error. The bit is supposed to be removed as part of the decode in diameter_gen.hrl but this didn't happen in case of an AVP that unknown to the dictionary in question.
2015-03-27Remove potentially large error reason in call to diameter_lib:log/4Anders Svensson
The function is intended to be traced on, to see abnormalities (mostly) without producing excessive output. In the case of decode failure, the error reason can be things like {badmatch, HugeBinary}. Missed in commit 0058430.
2015-03-04Fix handling of length errors on Grouped AVPsAnders Svensson
The decode of a Grouped AVP ignored the case that extracting component AVPs with diameter_codec:collect_avps/1 returned a tuple, in the case of a truncated AVP header.
2015-02-17Don't discard component diameter_avp list on Grouped AVP decode errorAnders Svensson
The AVPs of an incoming Diameter message diameter_codec:decode/2,3 are decoded into a diameter_packet record in two ways: as a message-specific record in the 'msg' field and as a deep list of diameter_avp records in the 'avps' field. The record decode came first; the diameter_avp decode came later to support the Diameter relay application, but can also be convenient for non-relay applications. The diameter_avp representation can be used with outgoing messages, but what exactly is supported for isn't clearly documented. In the diameter_avp list representation, it's AVPs of type Grouped that lead to nesting: instead of a diameter_avp record, a Grouped AVP is represented by a diameter_avp list whose head is the Grouped AVP itself, and whose tail is the list of component AVPs. The diameter_avp decode was broken in the case of decode errors: the Grouped AVP was represented as a bare diameter_avp, and the component records were lost. The decode now produces the intended list. Note that component AVPs that could not be decoded will have 'undefined' in their data field.
2015-02-17Fix process dictionary manipulation during message decodeAnders Svensson
Decode can span multiple codec modules, so written entries cannot be tagged on ?MODULE.
2014-09-08Don't leave extra bit in decoded AVP dataAnders Svensson
The bit is added in diameter_codec to induce a decode error in the case of 5014 errors, but was not removed before returning the decoded result. Code examining the binary data in a diameter_avp record would then see the extra bit.
2014-09-08Fix best effort decode of Failed-AVPAnders Svensson
Commit c2c00fdd didn't get it quite right: it only decoded failed AVPs in the common dictionary since it's this dictionary an answer-message is decoded in. An extra dictionary isn't something that's easily passed through the decode without rewriting dictionary compilation however, and that's no small job, so continue with the use/abuse of the process dictionary by storing the dictionary module for the decode to retrieve. This is one step worse than previous uses since the dictionary is put in one module (diameter_codec) and got in another (the dictionary module), but it's the lesser of two evils.
2014-09-08Fix decode of Failed-AVP in RFC 3588 answer-messageAnders Svensson
Commit 066544fa had the unintended consequence of breaking the decode of Failed-AVP in answer-message as defined in the RFC 3588, since the grammar doesn't list Failed-AVP as an explicit component AVP, in contrast to the RFC 6733 grammar, which does. Handle this case explicitly, as an exception, just as with Failed-AVP as parent AVP.
2014-05-28Merge branch 'anders/diameter/hardening/OTP-11721' into maintAnders Svensson
* anders/diameter/hardening/OTP-11721: Change answer_errors default from report to discard
2014-05-27Change answer_errors default from report to discardAnders Svensson
In the same vein as commit 00584303, to avoid logging traffic-related happenings. Not that the value in diameter.hrl is just documentation: the value is set explicitly when diameter:start_service/2 creates diameter_app records.
2014-05-26Do best-effort decode of Failed-AVPAnders Svensson
Commit 4ce2d3a6 (diameter-1.4.2, OTP-11007) disabled the decode of values in Failed-AVP components since any error caused the decode of Failed-AVP itself to fail. This is less than useful since (1) we should be able to decode it given that we've sent it (modulo mangling on the way to the peer and back), and (2) it's not unheard of to examine Failed-AVP to see what the peer objected to. This commits adds a best-effort decode: decode if possible, otherwise not, using the same abuse of the process dictionary as commit bbdb027c.
2014-05-26Fix handling of AVP length errors (5014) in unknown AVPsAnders Svensson
Commit 4ce2d3a6 added the insertion of a single bit into binary AVP data to induce an encode error in the case of a header length that pointed past the available bytes: a 5014 = DIAMETER_INVALID_AVP_LENGTH error. Commit 838856b fixed this for stringish Diameter types, but both commits neglected the case in which the offending AVP isn't known to the dictionary in question. Unless the AVP was regarded as erroneous for other reasons (eg. an M-bit resulting in 5001) it would be happily be packed into an 'AVP' field. If it was regarded as an error, the record could be passed back to diameter_codec:pack_avp/1, and if the record contained header data then there was no clause to deal with the unpleasantry. Deal with it by having the dictionary module strip the extra bit and flag the AVP as 5014, and by having diameter_codec handle any extra bit coming from an dictionary compiled against an old diameter_gen. An old dictionary won't detect 5014 however, so dictionaries should be recompiled. Change most of the guards in diameter_codec from is_bitstring/1 to is_binary/1. What's being passed to the decode functions are binaries received other the network. The only case in which a non-binary bitstring is when we've placed an extra bit there ourselves. (Modulo someone doing something they shouldn't.)
2014-05-26Replace traffic-related log reports with no-op function callsAnders Svensson
The former were a little over-enthusiastic and could cause a node to be logged to death if a peer Diameter node was sufficiently ill-willed. The function calls are to diameter_lib:log/4, the arguments of which identify the happening in question, and which does nothing but provide a function to trace on. Many existing log calls have been shrunk. The only remaining traffic-related report (hopefully) is that resulting from {answer_errors, report} config, and this has been slimmed.
2014-04-07Merge branch 'anders/diameter/17.0_release/OTP-11605'Anders Svensson
* anders/diameter/17.0_release/OTP-11605: Fix diameter.hrl comment typos
2014-04-07Fix diameter.hrl comment typosAnders Svensson
A Diameter Header Command Code is 24 bits, not 8, and an Application-ID is 32 bits, not 24. Thanks to Austin Aigbe for pointing it out.
2014-02-24Be lenient with the M-bit in Grouped AVPsAnders Svensson
RFC 6733 says this, in 4.4: Receivers of a Grouped AVP that does not have the 'M' (mandatory) bit set and one or more of the encapsulated AVPs within the group has the 'M' (mandatory) bit set MAY simply be ignored if the Grouped AVP itself is unrecognized. The rule applies even if the encapsulated AVP with its 'M' (mandatory) bit set is further encapsulated within other sub-groups, i.e., other Grouped AVPs embedded within the Grouped AVP. The first sentence is mangled but take it to mean this: An unrecognized AVP of type Grouped that does not set the 'M' bit MAY be ignored even if one of its encapsulated AVPs sets the 'M' bit. This is a bit of a non-statement since if the AVP is unrecognized then its type is unknown. We therefore don't know that its data bytes contain encapsulated AVPs, so can't but ignore any of those that set the M-bit. Doing anything else when the type *is* known would be inconsistent. OTP-11087 (commit 066544fa) caused the M-bit on any unrecognized AVP to be regarded as an error, unrecognized being taken to mean "not explicitly defined as a member of its container". (That is, an AVP that can't be packed into a dedicated record field, which is slightly stronger than "not defined".) This fixed the original intention for top-level AVPs but broke the required leniency for Grouped AVPs whose type is known. This commit restores the leniency. Note that dictionary files need to be recompiled for the commit to have effect. Thanks to Rory McKeown for reporting the problem.
2013-05-29Fix recognition of 5001 on mandatory AVP'sAnders Svensson
An AVP setting the M-bit was not regarded as erroneous if it was defined in the dictionary in question and its container (message or Grouped AVP) had an 'AVP' field. It's now regarded as a 5001 error (AVP_UNSUPPORTED), as in the case that the AVP is not defined.
2013-05-17Detect all 5005 (MISSING_AVP) errors and don't reverse errorsAnders Svensson
The previous commit ensures that only one will be reported in an answer message when diameter itself sets Result-Code/Failed-AVP. The order of errors in #diameter_packet.errors is that in which they're detected, not the reverse as previously.
2013-05-17Add spec to diameter_genAnders Svensson
2013-05-17Fix recognition of 5014 (INVALID_AVP_LENGTH) errorsAnders Svensson
Invalid lengths come in two flavours: ones that correctly point at the end of an AVP's payload but don't agree with its type, and ones that point elsewhere. The former are relatively harmless but the latter leave no way to recover AVP boundaries, which typically results in failure to decode subsequent AVP's in the message in question. In the case that AVP Length points past the end of the message, diameter incorrectly regarded the error as 5009, INVALID_AVP_BITS: not right since the error has nothing to do with AVP Flags. Ditto if the length was less than 8, a minimal header length. Only in the remaining case was the detected error 5014, INVALID_AVP_LENGTH. However, in this case it slavishly followed RFC 3588 in suggesting the undecodable AVP as Failed-AVP, thereby passing the woeful payload back to the sender to have equal difficulty decoding. Now follow RFC 6733 and suggest an AVP with a zero-filled payload.
2013-02-17Answer 5xxx errors with application_opt() request_errors = answerAnders Svensson
RFC 3588 allowed only 3xxx result codes in an answer-message (that is, an answer that sets the E-bit) while RFC 6733 also allows 5xxx result codes. Setting request_errors = answer tells diameter to answer 5xxx errors itself. Returning {answer_message, integer()} from a handle_request callback allows both 3xxx and 5xxx result codes to be set. {protocol_error, integer()} is retained for 3xxx result codes.
2013-02-16Add application_opt() request_errorsAnders Svensson
Configuring the value 'callback' all errors detected in incoming requests to result in a handle_request callback. The default value 'answer_3xxx' is the previous behaviour in which diameter answers protocol errors without a callback.
2013-02-08Remove trailing whitespaceAnders Svensson
2013-02-08Don't hardcode common dictionaryAnders Svensson
Instead, use whatever dictionary a transport has configured as supporting application id 0. This is to support the updated RFC 6733 dictionaries (which bring with them updated records) and also to be able to transparently support any changed semantics (eg. 5xxx in answer-message).
2012-08-31Update copyright yearsBjörn-Egil Dahlberg
2012-08-26Turn last field of #diameter_app{} into an options listAnders Svensson
To make for easier adding of future options. The record is only passed into transport modules so the only compatibility issue is with these. (No issue for diameter_{tcp,sctp} and unlikely but theoretically possible for any other implementations, which probably don't exist at this point.)
2011-12-06Smarter diameter_callbackAnders Svensson
The module was originally just intended as a minimal callback implementation that could be used as a template. Being able to order just a subset of callbacks (with reasonable defaults) makes for simpler code in many cases however so ready support for this can be useful.
2011-11-10diameter_dbg:log -> diameter_lib:logAnders Svensson
Should have been included in 5af64c7d57d83ce35bfd7b15ac3ce6ec7459fd73.
2011-09-26Remove duplicate info from error report at encode failureAnders Svensson
The message being encoded and dictionary module are included by diameter_codec.erl so diameter_gen.hrl doing so was overkill.
2011-05-20Remove undocumented interface functions plus comment fix.Anders Svensson
2011-05-18Initial commit of the diameter application.Anders Svensson
The application provides an implementation of the Diameter protocol as defined in RFC 3588.