| Age | Commit message (Collapse) | Author |
|---|
|
Whether making record declarations unreadable to compensate for
dialyzer's ignorance of match specs is worth it is truly debatable.
|
|
* anders/diameter/retransmission/OTP-13342:
Fix handling of shared peer connections in watchdog state SUSPECT
Remove unnecessary parentheses
Remove dead export
|
|
Not needed as of commit 6c9cbd96.
|
|
The export of diameter_traffic:failover/1 happened with the creation of
the module in commit e49e7acc, but was never needed since the calling
code was also moved into diameter_traffic.
|
|
* anders/diameter/request_leak/OTP-13137:
Fix request table leak at retransmission
Fix request table leak at exit signal
|
|
* anders/diameter/request_leak/OTP-13137:
Fix request table leak at retransmission
Fix request table leak at exit signal
|
|
In the case of retranmission, a prepare_retransmit callback could modify
End-to-End and/or Hop-by-Hop identifiers so that the resulting
diameter_request entry was not removed, since the removal was of entries
with the identifiers of the original request. The chances someone doing
this in practice are probably minimal.
|
|
The storing of request records in the ets table diameter_request was
wrapped in a try/after so that the latter would unconditionally remove
written entries. The problem is that it didn't deal with the process
exiting as a result of an exit signal, since this doesn't raise in an
exception. Since the process in question applies callbacks to user code,
we can potentially be linked to other process and exit as a result.
Trapping exits changes the current behaviour of the process, so spawn a
monitoring process that cleans up upon reception of 'DOWN'.
|
|
* anders/diameter/M-bit/OTP-12947:
Add service_opt() strict_mbit
|
|
There are differing opinions on whether or not reception of an arbitrary
AVP setting the M-bit is an error. 1.3.4 of RFC 6733 says this about
how an existing Diameter application may be modified:
o The M-bit allows the sender to indicate to the receiver whether or
not understanding the semantics of an AVP and its content is
mandatory. If the M-bit is set by the sender and the receiver
does not understand the AVP or the values carried within that AVP,
then a failure is generated (see Section 7).
It is the decision of the protocol designer when to develop a new
Diameter application rather than extending Diameter in other ways.
However, a new Diameter application MUST be created when one or more
of the following criteria are met:
M-bit Setting
An AVP with the M-bit in the MUST column of the AVP flag table is
added to an existing Command/Application. An AVP with the M-bit
in the MAY column of the AVP flag table is added to an existing
Command/Application.
The point here is presumably interoperability: that the command grammar
should specify explicitly what mandatory AVPs much be understood, and
that anything more is an error.
On the other hand, 3.2 says thus about command grammars:
avp-name = avp-spec / "AVP"
; The string "AVP" stands for *any* arbitrary AVP
; Name, not otherwise listed in that Command Code
; definition. The inclusion of this string
; is recommended for all CCFs to allow for
; extensibility.
This renders 1.3.4 pointless unless "*any* AVP" is qualified by "not
setting the M-bit", since the sender can effectively violate 1.3.4
without this necessitating an error at the receiver. If clients add
arbitrary AVPs setting the M-bit then request handling becomes more
implementation-dependent.
The current interpretation in diameter is strict: if a command grammar
doesn't explicitly allow an AVP setting the M-bit then reception of such
an AVP is regarded as an error. The strict_mbit option now allows this
behaviour to be changed, false turning all responsibility for the M-bit
over to the user.
|
|
To diameter_lib:log/4, which was last motivated in commit 39acfdb0.
|
|
OTP-12845
* bruce/change-license:
fix errors caused by changed line numbers
Change license text to APLv2
|
|
* anders/diameter/18/OTP-12588:
vsn -> 1.10
Remove dead upgrade-related code
Update appup for 18
Fix release note typo
Fix comment typo
|
|
Not needed with the parent commit's restart_application.
|
|
To diameter_lib:log/4, which was last motivated in commit 39acfdb0.
|
|
|
|
The message was regarded as unknown if the answer message in question
set the E-bit and the application dictionary was not the common
dictionary.
|
|
That is, outgoing answer messages received in response to a
handle_request callback having returned {relay, Opts}.
|
|
To clarify what it is that's being computed, which isn't entirely
obvious. No functional change, just renaming.
|
|
As the first step in starting to count outgoing, relayed answer
messages.
|
|
An incoming Diameter message is either a request, an answer to an
outstanding request, or an unexpected answer. The latter weren't
counted, but are now counted on keys of this form:
{pid(), {{unknown, 0}, recv, discarded}}
The form of the second element is similar to those of other counters,
like:
{{relay, 0|1}, send|recv, invalid_error_bit}
Compare this to the key used when counting known answers:
{{ApplicationId, CommandCode, 0}, recv}
The application id and command code aren't included so as not to count
on arbitrary keys, a topic last visited in commit 49e8b11c.
|
|
To differentiate between requests and answers, in analogy with relay
counters. This isn't backwards compatible, but these counters aren't yet
documented.
|
|
Commit 49e8b11c broke the counting of relayed message, causing them to
be accumulated as unknown messages.
|
|
Commit a1df50b3 broke result code counters in the case of answer
messages sent as a header/avp lists (unless the avps, untypically, set
the name field), and for answers sent/received in the relay application.
|
|
* anders/diameter/counters/OTP-12701:
Add counters testcase to 3xxx suite
Fix counting error with unknown application id
Add missing doc wording
|
|
Decode of an answer message not setting the E-bit, and containing
Experiment-Result but not Result-Code, identified Result-Code as the
erroneous when Erroneous-Result-Code was 3xxx. Here's an example (from
trace) of a the errors field after decode:
[{5004,
{diameter_avp,undefined,undefined,false,false,undefined,'Result-Code',
3001,undefined,undefined}}],
The diameter_avp was just constructed from the AVP name and decoded
result, without regard for which result code AVP contained the value.
Fix by extracting the AVP from the incoming message.
|
|
Statistics could be accumulated on a key like {{23,275,0}, recv} even
though 23 was not the application id of the dictionary in question.
Missed in commits df19c272 and 7816ab2f.
|
|
To bound the length of incoming messages that will be decoded. A message
longer than the specified number of bytes is discarded. An
incoming_maxlen_exceeded counter is incremented to make note of the
occurrence.
The motivation is to prevent a sufficiently malicious peer from
generating significant load by sending long messages with many AVPs for
diameter to decode. The 24-bit message length header accomodates
(16#FFFFFF - 20) div 12 = 1398099
Unsigned32 AVPs for example, which the current record-valued decode is
too slow with in practice. A bound of 16#FFFF bytes allows for 5461
small AVPs, which is probably more than enough for the majority of
applications, but the default is the full 16#FFFFFF.
|
|
Despite claims of full backwards compatibility, the text of RFC 6733
changes the interpretation of unspecified values in a DiameterURI. In
particular, 3588 says that the default port and transport are 3868 and
sctp respectively, while 6733 says it's either 3868/tcp (aaa) or
5658/tcp (aaas). The 3588 defaults were used regardless, but now use
them only if the common dictionary is diameter_gen_base_rfc3588. The
6733 defaults are used otherwise.
This kind of change in the standard can lead to interop problems, since
a node has to know which RFC its peer is following to know that it will
properly interpret missing URI components. Encode of a URI includes all
components to avoid such confusion.
That said, note that the defaults in the diameter_uri record have *not*
been changed. This avoids breaking code that depends on them, but the
risk is that such code sends inappropriate values. The record defaults
may be changed in a future release, to force values to be explicitly
specified.
|
|
* anders/diameter/string_decode/OTP-11952:
Let examples override default service options
Set {restrict_connections, false} in example server
Set {string_decode, false} in examples
Test {string_decode, false} in traffic suite
Add service_opt() string_decode
Strip potentially large terms when sending outgoing Diameter messages
Improve language consistency in diameter(1)
|
|
* anders/diameter/route_record/OTP-12551:
Fix ordering of AVPs in relayed messages
|
|
To control whether stringish Diameter types are decoded to string or
left as binary. The motivation is the same as in the parent commit: to
avoid large strings being copied when incoming Diameter messages are
passed between processes; or *if* in the case of messages destined for
handle_request and handle_answer callbacks, since these are decoded in
the dedicated processes that the callbacks take place in. It would be
possible to do something about other messages without requiring an
option, but disabling the decode is the most effective.
The value is a boolean(), true being the default for backwards
compatibility. Setting false causes both diameter_caps records and
decoded messages to contain binary() in relevant places that previously
had string(): diameter_app(3) callbacks need to be prepared for the
change.
The Diameter types affected are OctetString and the derived types that
can contain arbitrarily large values: OctetString, UTF8String,
DiameterIdentity, DiameterURI, IPFilterRule, and QoSFilterRule. Time and
Address are unaffected.
The DiameterURI decode has been redone using re(3), which both
simplifies and does away with a vulnerability resulting from the
conversion of arbitrary strings to atom.
The solution continues the use and abuse of the process dictionary for
encode/decode purposes, last seen in commit 0f9cdba.
|
|
Both incoming and outgoing Diameter messages pass through two or three
processes, depending on whether they're incoming or outgoing: the
transport process and corresponding peer_fsm process and (for incoming)
watchdog processes. Since terms other than binary are copied when
passing process boundaries, large terms lead to copying that can be
problematic, if frequent enough. Since only the bin and transport_data
fields of a diameter_packet record are needed by the transport process,
discard others when sending outgoing messages.
Strictly speaking, the statement that only the aforementioned fields are
needed by the transport process depends on the transport process. It's
true of those implemented by diameter (in diameter_tcp and
diameter_sctp), but an implementation that makes use of other fields is
assuming more than the documentation in diameter_transport(3) promises.
|
|
6.1.9 of RFC 6733 states this:
A relay or proxy agent MUST append a Route-Record AVP to all requests
forwarded.
The AVP was inserted as the head of the AVP list, not appended, since
the entire AVP list was reversed relative to the received order.
Thanks to Andrzej Trawiński.
|
|
* anders/diameter/retransmission/OTP-12415:
Fix retransmission of messages sent as header/avps list
|
|
Outgoing answers missing a Result-Code AVP or setting an E-bit
inappropriately were discarded, but there's no particular reason for
doing so if the answer can be encoded, and the sender has no way of
knowing that their answer has been discarded. It's also inappropriate
that the message be discarded in the relay case. Answers are now sent,
and an error counter incremented.
|
|
Extracting the End-to-End and Hop-by-Hop identifiers resulted in a
function clause error, causing the send to fail.
|
|
* anders/diameter/3xxx/OTP-12233:
Fix handling of 3xxx Result-Code without E-bit
|
|
Commit 00584303 broke the population of the errors field of the
diameter_packet record when an incoming request with an
E-bit/Result-Code mismatch was decoded. Instead of the intended
{5004, #diameter_avp{value = integer()}},
the value was a 4-tuple containing the integer Result-Code.
|
|
An outgoing request whose pick_peer callback selected a transport on
another node resulted in an orphaned diameter_request entry on that
node.
|
|
Commit c2c00fdd didn't get it quite right: it only decoded failed AVPs
in the common dictionary since it's this dictionary an answer-message is
decoded in. An extra dictionary isn't something that's easily passed
through the decode without rewriting dictionary compilation however, and
that's no small job, so continue with the use/abuse of the process
dictionary by storing the dictionary module for the decode to retrieve.
This is one step worse than previous uses since the dictionary is put in
one module (diameter_codec) and got in another (the dictionary module),
but it's the lesser of two evils.
|
|
An answer message that sets the E-bit is encoded/decoded with Diameter
common dictionary, using the answer-message grammar specified in the
RFC. However, the dictionary of the application in question is the one
that knows the command code of the message. Commit df19c272 didn't make
this distinction when incrementing counters for an answer-message, using
the common dictionary for both purposes, causing the message to be
counted as unknown. This commit remedies that.
|
|
Instead of grouping them with 'unknown'. These messages were keyed on
{ApplicationId, CommandCode, Rbit} prior to commit df19c272, but
distinguishing between the relay application and others is probably more
useful.
The only reason for not including the R-bit in the unknown key is that
the key is also used elsewhere, and relay is an expected case while
unknown isn't.
|
|
As mentioned in the parent commit. The {Id, send, retransmission}
key is of the same form as the {Id, send|recv, error} key used for
encode/decode errors.
|
|
Commit df19c272 broke this in avoiding counting on arbitrary keys.
It didn't break it sufficiently for the only counters usage in the test
suites to fail however: watchdog counters worked as intended, but no
others, not even CER and DPR. More testcases are needed.
This commit does change/fix the previous semantics somewhat:
- Retransmissions are no longer counted. This previously made it
impossible to distinguish between these and unanswered requests, since
both counted as an outgoing request. There should probably be a
retransmission counter but it should be distinct from the sent request
counter.
- The counting is always on the node from which diameter:call/4 is
invoked, not the node on which the transport resides, as was previously
the case. (Although they're typically one and the same.)
Note that none of these semantics are documented as yet, so we're not
changing a documented interface.
|
|
That is, don't use a key constructed from an incoming Diameter header
unless the message is known to the dictionary in question. Otherwise
there are 2^32 application ids, 2^24 command codes, and 2 R-bits for an
ill-willed peer to choose from, each resulting in new keys in the
counter table (diameter_stats).
The usual {ApplicationId, CommandCode, Rbit} in a key is replaced by the
atom 'unknown' if the message in question is unknown to the decoding
dictionary.
Counters for messages sent and received by a relay are (still) not
implemented.
|
|
The former were a little over-enthusiastic and could cause a node to be
logged to death if a peer Diameter node was sufficiently ill-willed.
The function calls are to diameter_lib:log/4, the arguments of which
identify the happening in question, and which does nothing but provide a
function to trace on. Many existing log calls have been shrunk.
The only remaining traffic-related report (hopefully) is that resulting
from {answer_errors, report} config, and this has been slimmed.
|
|
* anders/diameter/rc_counters/OTP-11937:
Count encode errors in outgoing messages
Count decode errors in incoming requests
Count decode errors independently of result codes
|
|
* anders/diameter/rc_counters/OTP-11891:
Count result codes in CEA/DWA/DPA
|
|
Only decode errors were counted previously. Keys are of the form
{Id, send, error}, where Id is:
{ApplicationId, CommandCode, Rbit} | unknown
The latter will be the case if not even a #diameter_header{} can be
constructed.
|
