aboutsummaryrefslogtreecommitdiffstats
path: root/lib/diameter/src
AgeCommit message (Collapse)Author
2015-03-27Limit FQDN in DiameterURI to 255 octetsAnders Svensson
As for the port number in the parent commit, a FQDN can't be arbitrarily long, at most 255 octets. Make decode fail if it's more.
2015-03-27Limit DiameterURI ports to 0-65535 digits on decodeAnders Svensson
A port number is a 16-bit integer, but the regexp used to parse it in commit 1590920 slavishly followed the RFC 6733 grammar in matching an arbitrary number of digits. Make decode fail if it's anything more than 5, to avoid doing erlang:list_to_integer/1 on arbitrarily large lists. Also make it fail if the resulting integer is outside of the expected range.
2015-03-27Add service_opt() incoming_maxlenAnders Svensson
To bound the length of incoming messages that will be decoded. A message longer than the specified number of bytes is discarded. An incoming_maxlen_exceeded counter is incremented to make note of the occurrence. The motivation is to prevent a sufficiently malicious peer from generating significant load by sending long messages with many AVPs for diameter to decode. The 24-bit message length header accomodates (16#FFFFFF - 20) div 12 = 1398099 Unsigned32 AVPs for example, which the current record-valued decode is too slow with in practice. A bound of 16#FFFF bytes allows for 5461 small AVPs, which is probably more than enough for the majority of applications, but the default is the full 16#FFFFFF.
2015-03-26Add guard to reject {spawn_opt, false} as transport/service_opt()Anders Svensson
It was possible to configure the option, but doing so caused the service to fail when starting a watchdog process: {function_clause, [{diameter_service,'-spawn_opts/1-lc$^0/1-0-', [false], [{file,"base/diameter_service.erl"},{line,846}]}, {diameter_service,start,5, [{file,"base/diameter_service.erl"},{line,820}]}, {diameter_service,start,3, [{file,"base/diameter_service.erl"},{line,782}]}, {diameter_service,handle_call,3, [{file,"base/diameter_service.erl"},{line,385}]}, {gen_server,try_handle_call,4,[{file,"gen_server.erl"},{line,607}]}, {gen_server,handle_msg,5,[{file,"gen_server.erl"},{line,639}]}, {proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,237}]}]} Tests for the option in the config suite were also missing. Bungled in commit 78b3dc6.
2015-03-24Update appup for 17.5Anders Svensson
Required load order by ticket. - OTP-11492, answer messages discarded - OTP-12415, retransmission failure - OTP-12475, grouped AVP decode - OTP-12543, no requests after DPR none - OTP-12412, shutdown issues diameter_lib diameter_service - OTP-12428, transport_opt() pool_size diameter_lib diameter_service diameter, diameter_config diameter_{tcp,sctp} diameter, diameter_config - OTP-12439, new time api in Erlang/OTP 18 diameter_lib diameter_{config,peer,reg,service,session,stats,sync,watchdog,sctp} - OTP-11952, service_opt() decode_string - OTP-12589, DiameterURI encode/decode diameter_{capx,codec,peer} diameter_types diameter_traffic diameter_{service,peer_fsm} diameter_watchdog diameter, diameter_config - OTP-12542, DPR with diameter:call/4 diameter_{peer_fsm,watchdog} diameter, diameter_config - OTP-12609, transport_opt() dpr_timeout diameter_peer_fsm diameter, diameter_config
2015-03-24Merge branch 'anders/diameter/dpr/OTP-12609' into maintAnders Svensson
* anders/diameter/dpr/OTP-12609: Discard incoming/outgoing requests after incoming DPR Add transport_opt() dpr_timeout Be lenient with errors in incoming DPR
2015-03-24Adapt to changed DiameterURI defaults in RFC 6733Anders Svensson
Despite claims of full backwards compatibility, the text of RFC 6733 changes the interpretation of unspecified values in a DiameterURI. In particular, 3588 says that the default port and transport are 3868 and sctp respectively, while 6733 says it's either 3868/tcp (aaa) or 5658/tcp (aaas). The 3588 defaults were used regardless, but now use them only if the common dictionary is diameter_gen_base_rfc3588. The 6733 defaults are used otherwise. This kind of change in the standard can lead to interop problems, since a node has to know which RFC its peer is following to know that it will properly interpret missing URI components. Encode of a URI includes all components to avoid such confusion. That said, note that the defaults in the diameter_uri record have *not* been changed. This avoids breaking code that depends on them, but the risk is that such code sends inappropriate values. The record defaults may be changed in a future release, to force values to be explicitly specified.
2015-03-24Reject transport=udp;protocol=diameter at DiameterURI encodeAnders Svensson
Both RFC 3588 and 6733 disallow the combination. Make its encode fail.
2015-03-24Merge branch 'anders/diameter/string_decode/OTP-11952' into maintAnders Svensson
* anders/diameter/string_decode/OTP-11952: Let examples override default service options Set {restrict_connections, false} in example server Set {string_decode, false} in examples Test {string_decode, false} in traffic suite Add service_opt() string_decode Strip potentially large terms when sending outgoing Diameter messages Improve language consistency in diameter(1)
2015-03-24Merge branch 'anders/diameter/route_record/OTP-12551' into maintAnders Svensson
* anders/diameter/route_record/OTP-12551: Fix ordering of AVPs in relayed messages
2015-03-24Add service_opt() string_decodeAnders Svensson
To control whether stringish Diameter types are decoded to string or left as binary. The motivation is the same as in the parent commit: to avoid large strings being copied when incoming Diameter messages are passed between processes; or *if* in the case of messages destined for handle_request and handle_answer callbacks, since these are decoded in the dedicated processes that the callbacks take place in. It would be possible to do something about other messages without requiring an option, but disabling the decode is the most effective. The value is a boolean(), true being the default for backwards compatibility. Setting false causes both diameter_caps records and decoded messages to contain binary() in relevant places that previously had string(): diameter_app(3) callbacks need to be prepared for the change. The Diameter types affected are OctetString and the derived types that can contain arbitrarily large values: OctetString, UTF8String, DiameterIdentity, DiameterURI, IPFilterRule, and QoSFilterRule. Time and Address are unaffected. The DiameterURI decode has been redone using re(3), which both simplifies and does away with a vulnerability resulting from the conversion of arbitrary strings to atom. The solution continues the use and abuse of the process dictionary for encode/decode purposes, last seen in commit 0f9cdba.
2015-03-23Strip potentially large terms when sending outgoing Diameter messagesAnders Svensson
Both incoming and outgoing Diameter messages pass through two or three processes, depending on whether they're incoming or outgoing: the transport process and corresponding peer_fsm process and (for incoming) watchdog processes. Since terms other than binary are copied when passing process boundaries, large terms lead to copying that can be problematic, if frequent enough. Since only the bin and transport_data fields of a diameter_packet record are needed by the transport process, discard others when sending outgoing messages. Strictly speaking, the statement that only the aforementioned fields are needed by the transport process depends on the transport process. It's true of those implemented by diameter (in diameter_tcp and diameter_sctp), but an implementation that makes use of other fields is assuming more than the documentation in diameter_transport(3) promises.
2015-03-23Discard incoming/outgoing requests after incoming DPRAnders Svensson
With the same motivation as in commits 5bd2d72 and b1fd629. As in the latter, incoming DPR is the only exception.
2015-03-23Add transport_opt() dpr_timeoutAnders Svensson
To cause a peer connection to be closed following an outgoing DPA, in case the peer fails to do so. It is the recipient of DPA that should close the connection according to RFC 6733.
2015-03-23Be lenient with errors in incoming DPRAnders Svensson
To avoid having the peer interpret the error as meaning the connection shouldn't be closed, which probably does more harm than ignoring syntactic errors in the DPR. Note that RFC 6733 says this about incoming DPR, in 5.4 Disconnecting Peer Connections: Upon receipt of the message, the Disconnect-Peer-Answer message is returned, which SHOULD contain an error if messages have recently been forwarded, and are likely in flight, which would otherwise cause a race condition. The race here is presumably between answers to forwarded requests and the outgoing DPA, but we have no handling for this: whether or not there are pending answers is irrelevant to how DPR is answered. It's questionable that a peer should be able to prevent disconnection in any case: it has to be the node sending DPR that decides if it's approriate, and the peer should take it as an indication of what's coming. Incoming DPA is already treated leniently: the only error that's not ignored is mismatching End-to-End and Hop-by-Hop Identifiers, since there's no distinguishing an erroneous value from an unsolicited DPA. This mismatch could also be ignored, which is the case for DWA for example, but this problem is already dealt with by dpa_timeout, which causes a connection to be closed even when the expected DPA isn't received.
2015-03-23Merge branch 'anders/diameter/dpr/OTP-12542' into maintAnders Svensson
* anders/diameter/dpr/OTP-12542: Discard CER or DWR sent with diameter:call/4 Allow DPR to be sent with diameter:call/4 Add transport_opt() dpa_timeout Add testcase for sending DPR with diameter:call/4
2015-03-23Merge branch 'anders/diameter/dpr/OTP-12543' into maintAnders Svensson
* anders/diameter/dpr/OTP-12543: Discard incoming requests after outgoing DPR Discard outgoing requests after outgoing DPR
2015-03-23Fix ordering of AVPs in relayed messagesAnders Svensson
6.1.9 of RFC 6733 states this: A relay or proxy agent MUST append a Route-Record AVP to all requests forwarded. The AVP was inserted as the head of the AVP list, not appended, since the entire AVP list was reversed relative to the received order. Thanks to Andrzej TrawiƄski.
2015-03-22Discard CER or DWR sent with diameter:call/4Anders Svensson
These are requests that diameter itself sends. It's previously been possible to send them, but answers timed out at the caller since they were discarded in diameter_watchdog. Answers will still timeout, but now the requests are discarded before being sent.
2015-03-22Allow DPR to be sent with diameter:call/4Anders Svensson
DPR is sent by diameter at application shutdown, service stop, or transport removal. It has been possible to send the request with diameter:call/4, but the answer was discarded, instead of the transport process being terminated. This commit causes DPR to be handled in the same way regardless of whether it's sent by diameter or by diameter:call/4. Note that the behaviour subsequent to DPA is unchanged. In particular, in the connecting case, the closed connection will be reestablished after a connect_timer expiry unless the transport is removed. The more probable use case is the listening case, to disconnect a single peer associated with a listening transport.
2015-03-22Add transport_opt() dpa_timeoutAnders Svensson
To make the default DPA timeout configurable. The timeout say how many milliseconds to wait for DPA in response to an outgoing DPR before terminating the transport process regardless.
2015-03-22Discard incoming requests after outgoing DPRAnders Svensson
Since there's a race between an answer being sent and the connection being closed upon the reception of DPA that's likely to be lost, and because of the questionability of sending messages after DPR, as discussed in the parent commit. An exception is made for DPR so that simultaneous DPR in both directions doesn't result in it being discarded on both ends.
2015-03-22Discard outgoing requests after outgoing DPRAnders Svensson
RFC 6733 isn't terribly clear about what should happen to incoming or outgoing messages once DPR is sent and the Peer State Machine transitions into state Closing. There's no event for this in section 5.6, Peer State Machine, and no clarification in section 5.4, Disconnecting Peer Connections. There is a little bit of discussion in 2.1.1, SCTP Guidelines, in relation to unordered message delivery, but the tone there is that messages might be received after DPR because of unordered delivery, not because they were actually sent after DPR. Discarding outgoing answers may do more harm than good, but requests are more likely to be unexpected, as has been seen to be the case with DWR following DPR. DPR indicates a desire to close the connection: discard any subsequent outgoing requests.
2015-03-22Merge branch 'anders/diameter/time/OTP-12439' into maintAnders Svensson
* anders/diameter/time/OTP-12439: Adapt to changes in time api
2015-03-19Adapt to changes in time apiAnders Svensson
erlang:convert_time_resolution/3 has been renamed to convert_time_unit. erlang:time_resolution/0 has been removed: use new time resolution values instead.
2015-03-05Merge branch 'anders/diameter/grouped_decode/OTP-12475' into maintAnders Svensson
* anders/diameter/grouped_decode/OTP-12475: Allow encode of decoded diameter_avp list Add testcases for diameter_avp decode Fix handling of length errors on Grouped AVPs Don't discard component diameter_avp list on Grouped AVP decode error Fix process dictionary manipulation during message decode
2015-03-05Merge branch 'anders/diameter/time/OTP-12439' into maintAnders Svensson
* anders/diameter/time/OTP-12439: Use new time api in test suites Use new time api in implementation
2015-03-05Merge branch 'anders/diameter/pool/OTP-12428' into maintAnders Svensson
* anders/diameter/pool/OTP-12428: Fix SCTP match blunder in suites Be backwards compatible with diameter_sctp listener state Add gen_tcp testcase that fails sporadically Simplify transport suite Remove (ancient) dead code Don't orphan slave nodes in example suite Refresh example code Improve language consistency in diameter(1) Add pool suite to test transport_opt() pool_size Adapt tcp/sctp transport modules for pool_size > 1 Add transport_opt() pool_size
2015-03-05Merge branch 'anders/diameter/shutdown/OTP-12412' into maintAnders Svensson
* anders/diameter/shutdown/OTP-12412: Increase service shutdown timeout Set shutdown = infinity for supervisor children Monitor more efficiently at shutdown
2015-03-05Merge branch 'anders/diameter/retransmission/OTP-12415' into maintAnders Svensson
* anders/diameter/retransmission/OTP-12415: Fix retransmission of messages sent as header/avps list
2015-03-04Allow encode of decoded diameter_avp listAnders Svensson
The decode of an incoming request in a non-relay application results in a deep list of diameter_avp records. Encoding such a list resulted in a function_clause error in diameter_codec:pack_avp/1, which expected a flat list. The list is only flat in the relay case, or in the absence of AVPs of type Grouped. This is also related to code that exists but isn't documented. It's documented that a diameter_app(3) handle_request callback can return {relay, Opts} to relay a request received in the relay application. What's not documented is that it can also return {proxy|resend, Opts} in a non-relay application, but this leads to encode failure when there are Grouped AVPs. This shouldn't be interpreted as meaning that proxy|resend are now supported: they aren't. The two extra terms are a historical relic that should probably be removed. Neither are generally usable since, for example, a proxy agent may want to modify a request before resending it. A specific handle_request return is not needed to implement a proxy agent. Even {relay, Opts} isn't strictly necessary.
2015-03-04Fix handling of length errors on Grouped AVPsAnders Svensson
The decode of a Grouped AVP ignored the case that extracting component AVPs with diameter_codec:collect_avps/1 returned a tuple, in the case of a truncated AVP header.
2015-02-25Don't discard outgoing answers with Result-Code/E-bit errorsAnders Svensson
Outgoing answers missing a Result-Code AVP or setting an E-bit inappropriately were discarded, but there's no particular reason for doing so if the answer can be encoded, and the sender has no way of knowing that their answer has been discarded. It's also inappropriate that the message be discarded in the relay case. Answers are now sent, and an error counter incremented.
2015-02-20Use new time api in implementationAnders Svensson
In particular, deal with the deprecation of erlang:now/0 in OTP 18. Be backwards compatible with older releases: the new api is only used when available. The test suites have not been modified.
2015-02-20Be backwards compatible with diameter_sctp listener stateAnders Svensson
Commit 24993fc2 modified the state even in the case that the new pool_size option the change was introduced to support was not used. Doing so made downgrade impossible since old code would not be prepared for the modified state. Retain a compatible state, so that simple code replacement is enough.
2015-02-20Remove (ancient) dead codeAnders Svensson
Commit 9a671bf0 removed the need for diameter_sctp to send outgoing messages through the listening process. That was prior to R5B02, so the clause isn't need for any upgrade case.
2015-02-20Refresh example codeAnders Svensson
Which hasn't received any attention for some time. Clean it up, rename the poorly named peer.erl (it's Diameter *nodes* that are implemented), and make the it possible to specify arbitrary transport configuration.
2015-02-20Adapt tcp/sctp transport modules for pool_size > 1Anders Svensson
In particular, that starts for the same transport reference can now be concurrent. Looking up a listener process and starting a new one if not found did handle this (more than one process could find no listener), and diameter_sctp assumed there could only be one transport process waiting for an association.
2015-02-20Add transport_opt() pool_sizeAnders Svensson
Transport processes are started by diameter one at a time. In the listening case, a transport process accepts a connection, tells the peer_fsm process, which tells its watchdog process, which tells its service process, which then starts a new watchdog, which starts a new peer_fsm, which starts a new transport process, which (finally) goes about accepting another connection. In other words, not particularly aggressive in accepting new connections. This behaviour doesn't do particularly well with a large number of concurrent connections: with TCP and 250 connecting peers we see connections being refused. This commit adds the possibilty of configuring a pool of accepting processes, by way of a new transport option, pool_size. Instead of diameter:add_transport/2 starting just a single process, it now starts the configured number, so that instead of a single process waiting for a connection there's now a pool. The option is even available for connecting processes, which provides an alternate to adding multiple transports when multiple connections to the same peer are required. In practice this also means configuring {restrict_connections, false}: this is not implicit. For backwards compatibility, the form of diameter:service_info(_,transport) differs in the connecting case, depending on whether or not pool_size is configured. Note that transport processes for the same transport_ref() can be started concurrently when pool_size > 1. This places additional requirements on diameter_{tcp,sctp}, that will be dealt with in a subsequent commit.
2015-01-19Fix retransmission of messages sent as header/avps listAnders Svensson
Extracting the End-to-End and Hop-by-Hop identifiers resulted in a function clause error, causing the send to fail.
2015-01-19Increase service shutdown timeoutAnders Svensson
Shutting down the service causes DPR to be sent on all open transports under the service. These in turn have a timeout for the reception of DPA, but the timeout is bounded by the supervisor's in practice. Both timeouts were 1 second. Increase the supervisor timeout to 5 seconds. Note that the service supervisor is furthest to the right in the supervision tree in diameter_sup. Thus is significant, so that the transport-related processes aren't shutdown first.
2015-01-19Set shutdown = infinity for supervisor childrenAnders Svensson
As suggested in supervisor(3). The leaves of the supervision tree should determine the timeouts.
2015-01-19Monitor more efficiently at shutdownAnders Svensson
There's no need for building a pid list only to map it to a list of monitor references. Also, monitoring before banging the shutdown message makes for better trace, avoiding unnecessary noproc reasons when the process dies before the monitor is created.
2014-12-01Update appup for 17.4Anders Svensson
OTP-12196 remote request table leak OTP-12233 3xxx result code without E-bit OTP-12281 ignored connect_timer OTP-12308 filter ordering
2014-12-01Merge branch 'anders/diameter/filters/OTP-12308' into maintAnders Svensson
* anders/diameter/filters/OTP-12308: Order peers in pick_peer callbacks
2014-12-01Merge branch 'anders/diameter/connect_timer/OTP-12281' into maintAnders Svensson
* anders/diameter/connect_timer/OTP-12281: Tweak reason in closed event Fix ignored connect timer Check {connect,watchdog}_timer distinction in event testcases Rename reconnect_timer to connect_timer in examples and suites
2014-12-01Merge branch 'anders/diameter/3xxx/OTP-12233' into maintAnders Svensson
* anders/diameter/3xxx/OTP-12233: Fix handling of 3xxx Result-Code without E-bit
2014-11-27Order peers in pick_peer callbacksAnders Svensson
The order of peers presented to a diameter_app(3) pick_peer callback has previously not been documented, but there are use cases that are simplified by an ordering. For example, consider preferring a direct connection to a specified Destination-Host/Realm to any host in the realm. The implementation previously treated this as a special case by placing matching hosts at the head of the peers list, but the documentation made no guarantees. Now present peers in match-order, so that the desired sorting is the result of the following filter. {any, [{all, [host, realm]}, realm]} The implementation is not backwards compatible in the sense that a realm filter alone is no longer equivalent in this case. However, as stated, the documentation never made any guarantees regarding the sorting.
2014-11-03Tweak reason in closed eventAnders Svensson
From {error, Reason} to {no_connection, Reason} when a connection can't be established. The exit reason of a diameter_peer_fsm process is turned into a message from the corresponding diameter_watchdog process to the relevant diameter_service process, the latter sending a 'closed' event including the reason to any subscribers. Reason = [] when none of the configured transport modules succeeds in establishing a connection, which admittedly isn't terribly descriptive. (The lists is of error reasons from transport start functions, which is empty as long as transport processes start successfully.) Note that this form of the closed event is undocumented, aside from the documentation saying that one should expect undocumented events. The explicitly documented forms are currently specific to CER/CEA failures.
2014-11-03Fix ignored connect timerAnders Svensson
There are two timers governing the establishment of peer connections: connect_timer and watchdog_timer. The former is the RFC 6733 Tc timer and is used by diameter_service to establish an initial connection. The latter is RFC 3539 TwInit and is used by diameter_watchdog for connection reestablishment after the watchdog leaves state INITIAL. A connecting transport ignored the connect timer since the watchdog process never died, regardless of the watchdog state, causing the watchdog timer to handle reconnection. This seems to have been broken for some time.