| Age | Commit message (Collapse) | Author |
|---|
|
* anders/diameter/21.3/OTP-15654:
Update appup for diameter 2.2 in OTP 21.3
|
|
* anders/diameter/distribution/OTP-15398:
Add diameter_dist_SUITE to exercise diameter_dist:route_session/2
Add consistent hashing to diameter_dist:route_session/2
Add options to diameter_dist:route_session/2 node selection
Add diameter_dist for ready spawn_opt callbacks
Tweak/document request handler callback
Document acknowledgements in transport interface
Fix comment typo
|
|
If the Session-Id optional value to node() mapping fails then hash
Session-Id to a node by default, instead of selecting the local node as
in the parent commit. The previous behaviour is configurable by setting
default = local in an options map.
Nodes make themselves part of the pool from which nodes are selected by
calling diameter_dist:attach/1 with the list of service names they are
willing to handle requests for, the local node being selected in the
absence of any attached nodes. The original idea was to base the node
pool on share_peers and/or use_shared_peers configuration, but that
configuration determines where outgoing requests can be sent, while
route_session/2 deals with incoming requests, so it's not obvious that
conflating the two is a good thing. (Also because
share_peers/use_shared_peers can be used in different ways; the former
could have been skipped entirely.)
The hashing effectively places nodes on a circle, a hashed Session-Id
being mapped to the nearest predecessor node (clockwise). Nodes are
rehashed with each Session-Id (with the id as salt) for a more even
distribution, at the cost of performance, although how high the cost or
how even the distribution has yet to be tested. Obviously, the larger
the number of attached nodes, the higher the cost. Adding/removing an
attached node only affects session ids that hash in the interval between
the added/removed node and its successor (hence consistent hashing).
Options are tweaked slightly compared to the parent commit, and it is
now possible to restrict the optional value mapping to specific Diameter
identities, to avoid mapping an id that was generated at the peer when
the peer is also implemented with the diameter application.
Note that diameter_dist is not yet an officially documented interface,
so could change. Documentation is in the module itself.
|
|
To be able to restrict how many AVPs will be examined (from the front of
a message) when looking for Session-Id, and to decide what to do with if
the AVP isn't found. Options are specified as a map of the following
form.
#{search => non_neg_integer(),
default => discard | mfa(),
dispatch => list() | mfa()}
The search member says how many AVPs to examine at most, from the front
of the message. If the optional value of a Session-Id is not the name of
a connected node then the default member determines what to do with the
request, handle it locally (the default), discard it, or invoke an MFA
on the Session-Id | false (if none was found) and diameter_packet record
to return a node() | false; if the latter then the request is discarded.
If a node is identified then the dispatch MFA is invoked on the node and
the request MFA (as three arguments), a list Opts being equivalent to
the MFA {erlang, spawn_opt, [Opts]}, and the default being the empty
list.
Integer- or list-valued options are equivalent to the corresponding map
with a single value.
Limiting the search is to avoid searching messages containing many AVPs
for a Session-Id that is known to occur near the header, since section
8.8 of RFC 6733 says this:
When present, the Session-Id SHOULD appear immediately
following the Diameter header (see Section 3).
There's no guarantee, but in practice it may well be known that peers
are respecting the RFC, and in that case limiting the search is a
defense against searching messages from a malicious peer unnecessarily.
The search is unlimited by default.
A default is only used when a search fails to locate a Session-Id, and
can be to discard the message, or have a node() or false be returned
from an MFA applied to the diameter_packet in question. The local node
is chosen by default.
|
|
That is, of functions that can be configured as spawn_opt MFAs in
transport configuration.
This commits adds the spawn_local described in the parent commit, and a
route_session that assumes that the local node initiates all sessions
with Session-Id returned by diameter:session_id/1, and handles incoming
requests on the node on which the id in question was returned,
diameter:session_id/1 using node() as optional value in the Session-Id
format.
|
|
The possibility of configuring an MFA as spawn_opt was added in commit
fd285079, the callback being passed an arity-0 fun to be applied in an
appropriate handler process. Replace the fun by a tuple to be passed to
diameter_traffic:request/1, to avoid passing funs between nodes when
handler processes are remote.
A list-valued spawn_opt is now equivalent to the following configured as
{spawn_opt, {Mod, spawn_local, [Opts]}}.
spawn_local(ReqT, Opts) ->
spawn_opt(diameter_traffic, request, [ReqT], Opts).
ReqT is passed by diameter and contains information that the callback
may want to decide where to handle the request in question (which wasn't
accessible with a fun), but this information isn't exposed in a
documented way. The intention is instead to add an own callback
implementation to make use of the information.
Note that application lookup now takes place in the watchdog process in
both the list-valued (or no configuration) and mfa-valued cases. Whether
this is good, bad, or (probably) inconsequential remains to be seen.
|
|
|
|
|
|
* ingela/diameter/ssl-dialyzer-types:
diameter: Update to use exported types
|
|
* anders/diameter/nocatch/OTP-15569:
Update appup
Fix nocatch on incoming answer with faulty Experimental-Result-Code
|
|
For OTP-15569, to be released in OTP 20.3.8.19.
|
|
|
|
Failure to decode the Grouped AVP results in a throw from module
diameter_gen, which is caught in the normal message decode, but wasn't
when only the AVP is decoded from diameter_traffic (for error checking
and counter increment). The result was no handle_answer/error
callback, and an error return from diameter:call/4 when the detach
option was not specified.
|
|
* anders/diameter/21.1/OTP-15202:
vsn -> 2.1.6
Update appup for 21.1
|
|
OTP-15198 Fix function_clause when sending a request after outgoing DPA
|
|
After DPR, the intention is that outgoing answers are sent and outgoing
requests are discarded. This was the case when the DPR was outgoing, but
if it was incoming then a subsequent outgoing request resulted in a
function_clause, bringing down the diameter_peer_fsm gen_server
associated with the transport connection in question.
With diameter_tcp/sctp, the failure can result in the connection being
reset before the peer closes it in response to DPA, but is otherwise
harmless since DPR means that the connection is already on its way down.
|
|
|
|
Don't bother generating applications/runtime_dependencies: what's lost
in duplication is gained in clarity.
SSL in runtime_applications but not applications in questionable, but
it's been this way for a long time with no apparent ill effects or
protests.
|
|
|
|
|
|
|
|
* anders/diameter/20.3/OTP-14946:
vsn -> 2.1.4
Update appup for 20.3
Update service_info examples in doc
Fix inaccurate comment
|
|
* anders/diameter/terminate/ERIERL-124:
Fix handling of SUSPECT connections at service termination
|
|
* anders/diameter/reg/OTP-14839:
Fix diameter_reg:subscribe/2 remove notification
|
|
|
|
A peer_fsm process can be started long before a connection is
established in the listening case. The time reported in a 'peer' tuple
in service_info is of connection establishment.
|
|
A peer connection in watchdog state SUSPECT is represented by a peer
table entry in diameter_service, but not by a request table entry in
diameter_peer, so diameter_service:terminate/2 could result in failures
like this:
exception error: no match of right hand side value []
in function diameter_traffic:peer_down/1 (base/diameter_traffic.erl, line 141)
in call from lists:foldl/3 (lists.erl, line 1263)
in call from ets:do_foldl/4 (ets.erl, line 611)
in call from ets:foldl/3 (ets.erl, line 600)
in call from diameter_service:terminate/2 (base/diameter_service.erl, line 557)
in call from gen_server:try_terminate/3 (gen_server.erl, line 648)
in call from gen_server:terminate/10 (gen_server.erl, line 833)
in call from gen_server:handle_msg/6 (gen_server.erl, line 679)
|
|
Commit fae8ca0c broke notification by removing table elements before
matching for them, causing diameter_tcp/sctp listening processes to
live on after diameter:remove_transport/2.
Commit 58091992 added diameter_reg:subscribe/2, and commit 5ca5fb71
started using it for listener exit.
|
|
Only change is doc.
|
|
* anders/diameter/decode/OTP-14684:
vsn -> 2.1.2
Update appup for ERIERL-14684
|
|
The options map wasn't updated after the AVP was identified, with
the resulting consequences for M-bit interpretation.
|
|
Which may have been used in the past, but aren't now.
|
|
The wrong variable was passed into the decode recursion, causing the
options map to be contaminated by strict_mbit and failed_avp
modifications that should only apply to component AVPs in the Grouped
case. Decode errors and M-bits could be ignored as a result.
|
|
|
|
|
|
Commit fae8ca0c inadvertently removed the monitor at add/1 and
add_new/1. As a result, process death did not remove associations,
causing table diameter_reg to leak entries and stop/start of a service
to fail.
Add a testcase to detect the problem, which existing testcases miss.
|
|
* anders/diameter/20.1/OTP-14561:
Update appup and version for 20.1
|
|
* anders/diameter/sctp/OTP-10889:
Make unordered delivery configurable
|
|
* anders/diameter/performance/OTP-14521:
Fix append of Route-Record AVPs
|
|
Changing the default in the parent commit is possibly a bit dangerous,
even if the motivation still holds. Take a step back and make unordered
delivery a matter of configuration, without changing the default:
configuration is {unordered, boolean() | pos_integer()}, with false the
default, and N equivalent to OS =< N, where OS is the number of outbound
streams negotiated on the association in question.
A user can mess with this by configuring an sctp_default_send_param of
their own, but unordered sending is them from start, not only after the
second message reception.
|
|
Commit b3d9e0c0 did away with the reordering of diameter_avp lists, so
prepending the AVP to the list means prepending it in the message, which
is not what the RFC requires.
Appending to a list isn't ideal, but right now there's no better way.
|
|
|
|
* anders/diameter/grouped_decode/OTP-14607:
Fix diameter_packet.avps decode of Grouped AVP errors in Failed-AVP
|
|
* anders/diameter/DOIC/OTP-14588:
Fix avp_dictionaries decode with {decode_format, none}
|
|
The decode didn't respect the format as a list of diameter_avp records,
so information about faulty component AVPs was lost.
|
|
Decode is only a no-op when the AVP is Grouped, and then only on the
Grouped AVP itself, not its components.
|
|
* anders/diameter/config_consistency/OTP-14555:
Fix type spec
Fix strict_arities blunder
|
|
* anders/diameter/performance/OTP-14521:
Simplify implementation in diameter_reg (take 2)
|
|
Map key was not retained when the spec was added in commit 66bb5251.
|
|
The watchdog process retained the configuration, causing DWR/DWA encode
to fail on a string-valued Origin-Host/Realm if the encode arity was
relaxed.
Bungled in commit 5f3becad.
|
