Age | Commit message (Collapse) | Author |
|
|
|
|
|
Each service process maintains a dictionary of peers, mapping an
application alias to a {pid(), #diameter_caps{}} list of connected
peers. These lists are potentially large, peers were appended to the end
of the list for no particular reason, and these long lists were
constructed/deconstructed when filtering them for pick_peer callbacks.
Many simultaneous outgoing request could then slow the VM to a crawl,
with many scheduled processes mired in list manipulation.
The pseudo-dicts are now replaced by plain ets tables. The reason for
them was (once upon a time) to have an interface interchangeable with a
plain dict for debugging purposes, but strict swapablity hasn't been the
case for some time now, and in practice a swap has never taken place.
Additional tables mapping Origin-Host/Realm have also been introduced,
to minimize the size of the peers lists when peers are filtered on
host/realm. For example, a filter like
{any, [{all, [realm, host]}, realm]}
is probably a very common case: preferring a Destination-Realm/Host
match before falling back on Destination-Realm alone. This is now more
efficiently (but not equivalently) expressed as
{first, [{all, [realm, host]}, realm]}
to stop the search when the best match is made, and extracts peers from
host/realm tables instead of searching through the list of all peers
supporting the application in question. The code to try and start with a
lookup isn't exhaustive, and the 'any' filter is still as inefficient as
previously.
|
|
* anders/diameter/17/time/OTP-12926:
Simplify time manipulation
Remove use of monotonic time in pre-18 code
Remove unnecessary redefinition of erlang:max/2
|
|
By doing away with more wrapping that the parent commit started to
remove.
|
|
OTP-12845
* bruce/change-license:
fix errors caused by changed line numbers
Change license text to APLv2
|
|
* anders/diameter/sctp/OTP-12768:
Fix connection timeouts in test transports
Fix start order of alternate transports
Log discarded answers
Ensure accepting processes are first in, first out
Remove upgrade-related code
Be less parallel in traffic suite
Increase send/receive buffers for testsuite SCTP listeners
Decrease unnecessarily long testsuite timetraps
Simplify accepting transport start
Simplify peeloff signaling
Simplify socket close at terminate
Don't monitor listener after peeloff
Don't receive initial messages out of order
Remove assumption that SCTP association ids will be unique
|
|
At the current count, there are 128 groups run in parallel, each of
which runs 52 testcases in parallel. That makes for 128*52 = 6656
testcases, which is probably also a factor in the sporadic failures
addressed by the parent commit. Don't run the 128 groups in parallel.
|
|
|
|
RFC 6733 says this of Failed-AVP in 7.5:
In the case where the offending AVP is embedded within a Grouped AVP,
the Failed-AVP MAY contain the grouped AVP, which in turn contains
the single offending AVP. The same method MAY be employed if the
grouped AVP itself is embedded in yet another grouped AVP and so on.
In this case, the Failed-AVP MAY contain the grouped AVP hierarchy up
to the single offending AVP. This enables the recipient to detect
the location of the offending AVP when embedded in a group.
It says this of DIAMETER_INVALID_AVP_LENGTH in 7.1.5:
The request contained an AVP with an invalid length. A Diameter
message indicating this error MUST include the offending AVPs
within a Failed-AVP AVP. In cases where the erroneous AVP length
value exceeds the message length or is less than the minimum AVP
header length, it is sufficient to include the offending AVP
header and a zero filled payload of the minimum required length
for the payloads data type. If the AVP is a Grouped AVP, the
Grouped AVP header with an empty payload would be sufficient to
indicate the offending AVP. In the case where the offending AVP
header cannot be fully decoded when the AVP length is less than
the minimum AVP header length, it is sufficient to include an
offending AVP header that is formulated by padding the incomplete
AVP header with zero up to the minimum AVP header length.
The AVPs placed in the errors field of a diameter_packet record are
intended to be appropriate for inclusion in a Failed-AVP, but neither of
the above paragraphs has been followed in the Grouped case: the entire
faulty AVP (non-faulty components and all) has been included. This made
it impossible to identify the actual faulty AVP in all but simple case.
This commit adapts the decode to the RFC, and implements the suggested
single faulty AVP, nested in as many Grouped containers as required.
The best-effort decode of Failed-AVP in answer messages, initially
implemented in commit 0f9cdbaf, is also applied.
|
|
Previously it was only run over TCP.
Configure a pool of accepting processes since simultaneous connections
are otherwise prone to rejection, as discussed in commit 4b691d8d.
Tweak timeouts to more reasonable values.
|
|
The send_error testcase tested that Session-Id in an answer-message was
not undefined, but that's always the case since the AVP has arity 0 or
1. The correct test is that it's a list of length 1, to ensure that
diameter has inserted the session id as expected.
|
|
To ensure that the expected answer messages are received.
|
|
Decode of an answer message not setting the E-bit, and containing
Experiment-Result but not Result-Code, identified Result-Code as the
erroneous when Erroneous-Result-Code was 3xxx. Here's an example (from
trace) of a the errors field after decode:
[{5004,
{diameter_avp,undefined,undefined,false,false,undefined,'Result-Code',
3001,undefined,undefined}}],
The diameter_avp was just constructed from the AVP name and decoded
result, without regard for which result code AVP contained the value.
Fix by extracting the AVP from the incoming message.
|
|
To bound the length of incoming messages that will be decoded. A message
longer than the specified number of bytes is discarded. An
incoming_maxlen_exceeded counter is incremented to make note of the
occurrence.
The motivation is to prevent a sufficiently malicious peer from
generating significant load by sending long messages with many AVPs for
diameter to decode. The 24-bit message length header accomodates
(16#FFFFFF - 20) div 12 = 1398099
Unsigned32 AVPs for example, which the current record-valued decode is
too slow with in practice. A bound of 16#FFFF bytes allows for 5461
small AVPs, which is probably more than enough for the majority of
applications, but the default is the full 16#FFFFFF.
|
|
By adding string decode or not in the server or client as another
combination. Run all traffic cases in parallel: remove the sequential
tests. Common test seems unable to deal with {group, X, [parallel]}
within a group.
|
|
* anders/diameter/time/OTP-12439:
Use new time api in test suites
Use new time api in implementation
|
|
Clause matching error for specific test cases was harmless since the
subsequent clause also matched. Errors detected by the server result in
Failed-AVP being sent, which should not lead to a decode error in the
client.
|
|
Outgoing answers missing a Result-Code AVP or setting an E-bit
inappropriately were discarded, but there's no particular reason for
doing so if the answer can be encoded, and the sender has no way of
knowing that their answer has been discarded. It's also inappropriate
that the message be discarded in the relay case. Answers are now sent,
and an error counter incremented.
|
|
Where it's less important to do so, but it has to be done at some point
since erlang:now/0 is deprecated. As in the parent commit, continue to
use the old api if the new one is unavailable.
|
|
This isn't currently the case, but soon will be.
|
|
In particular, a length that points past the end of the message. This
goes undetected there is some other problem with the AVP (eg. M-bit),
which is a problem we're about to fix.
|
|
That is, for the process that's spawned for each incoming Diameter
request message.
|
|
* anders/diameter/missed_5001/OTP-11087:
Remove redundant integer type specifiers from binaries
Fix recognition of 5001 on mandatory AVP's
|
|
* anders/diameter/avp_decode/OTP-11007:
Detect all 5005 (MISSING_AVP) errors and don't reverse errors
Adapt Failed-AVP setting to RFC 6733
Add spec to diameter_codec
Add spec to diameter_gen
Fix recognition of 5014 (INVALID_AVP_LENGTH) errors
Ensure setting Failed-AVP is appropriate
Correct AVP Length error testcases
|
|
* anders/diameter/avp_length_failure/OTP-11026:
Fix decode failure when AVP Length < 8
|
|
|
|
An AVP setting the M-bit was not regarded as erroneous if it was defined
in the dictionary in question and its container (message or Grouped AVP)
had an 'AVP' field. It's now regarded as a 5001 error (AVP_UNSUPPORTED),
as in the case that the AVP is not defined.
|
|
To return what RFC 6733 says. 3588 says less so follow 6733, even
though the extra specification of 6733 means that it isn't strictly
backwards compatible. In particular, 6733 says to send a zero'd payload
or none at all while 3588 says to send the offending AVP, despite the
fact that the peer will likely have equal difficulty in decoding it.
The testcases now fail, which will be remedied in subsequent commits.
|
|
Such a length caused decode of a message with valid (24-bit) length to
fail. Note that the error detected is wrong: it should be 5014
(INVALID_AVP_LENGTH), not 3009 (INVALID_AVP_BITS). This will be dealt
with by OTP-11007.
|
|
Point was to test that Session-Id was not undefined. Instead, test case
send_error just returned false.
|
|
Due to sporadic timeouts one some (slow) hosts.
|
|
In particular, have the resulting badmatch contain the starting and
ending time. There are still sporadic failures on slow hosts.
|
|
|
|
|
|
|
|
That check for unexpected entries in the request table.
|
|
|
|
This and record/list encode more systematically.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* anders/diameter/avp_errors/OTP-10202:
Add a testcase
Fix answer-message blunder
|