| Age | Commit message (Collapse) | Author |
|---|
|
It was originally written before this interface existed.
|
|
|
|
|
|
By using binary comprehensions. Add string-valued addresses to codec
suite.
|
|
To accept any nested list of codepoints and binaries. A list containing
a binary was previously misinterpreted and the documentation was
incomplete.
Also, rework codec suite slightly to be able to specify values for which
decode o encode is the identity map, for which encode should succeed,
and for which encode should fail.
|
|
|
|
Commit f0a36c79 broke the handling of such configuration, resulting in a
function clause error in diameter_capx if the list was not of length 3,
and faulty extraction of application id's otherwise. Only record-valued
config was properly interpreted.
|
|
* anders/diameter/release/R16B01/OTP-11120:
vsn -> 1.4.2
Update appup for R16B01
Trailing whitespace and copyright fixes
Minor macro simplification
Move app/appsrc from src/base into src
|
|
* anders/diameter/request_spawn/OTP-11060:
Make spawn options for request processes configurable
|
|
That is, for the process that's spawned for each incoming Diameter
request message.
|
|
Option 'accept' allows remote addresses to be configured as tuples or
regular expressions. The remote addresses for any incoming (aka
accepted) connection/association are matched against the configured
values, any non-matching address causing the connection/association to
be aborted.
|
|
|
|
RFC 6733 says that certain 5xxx result codes must be accompanied by
Failed-AVP, and decode populates #diameter_packet.errors with
Result-Code/AVP pairs for errors it detects. However, Failed-AVP was not
set in the outgoing answer if the handle_request callback returned
{answer_message, 5xxx}. It is now set with the AVP from the first pair
with the specified Result-Code, if found.
Note that {answer_message, 5xxx} doesn't handle all cases in which a
5xxx answer is required, only that in which the setting above is
appropriate. If it isn't then handle_request should construct its answer
and return {reply, Ans}.
|
|
* anders/diameter/missed_5001/OTP-11087:
Remove redundant integer type specifiers from binaries
Fix recognition of 5001 on mandatory AVP's
|
|
* anders/diameter/avp_decode/OTP-11007:
Detect all 5005 (MISSING_AVP) errors and don't reverse errors
Adapt Failed-AVP setting to RFC 6733
Add spec to diameter_codec
Add spec to diameter_gen
Fix recognition of 5014 (INVALID_AVP_LENGTH) errors
Ensure setting Failed-AVP is appropriate
Correct AVP Length error testcases
|
|
* anders/diameter/avp_length_failure/OTP-11026:
Fix decode failure when AVP Length < 8
|
|
|
|
An AVP setting the M-bit was not regarded as erroneous if it was defined
in the dictionary in question and its container (message or Grouped AVP)
had an 'AVP' field. It's now regarded as a 5001 error (AVP_UNSUPPORTED),
as in the case that the AVP is not defined.
|
|
The previous commit ensures that only one will be reported in an answer
message when diameter itself sets Result-Code/Failed-AVP.
The order of errors in #diameter_packet.errors is that in which they're
detected, not the reverse as previously.
|
|
Invalid lengths come in two flavours: ones that correctly point at the
end of an AVP's payload but don't agree with its type, and ones that
point elsewhere. The former are relatively harmless but the latter leave
no way to recover AVP boundaries, which typically results in failure to
decode subsequent AVP's in the message in question.
In the case that AVP Length points past the end of the message, diameter
incorrectly regarded the error as 5009, INVALID_AVP_BITS: not right
since the error has nothing to do with AVP Flags. Ditto if the length
was less than 8, a minimal header length. Only in the remaining case was
the detected error 5014, INVALID_AVP_LENGTH. However, in this case it
slavishly followed RFC 3588 in suggesting the undecodable AVP as
Failed-AVP, thereby passing the woeful payload back to the sender to
have equal difficulty decoding. Now follow RFC 6733 and suggest an AVP
with a zero-filled payload.
|
|
To return what RFC 6733 says. 3588 says less so follow 6733, even
though the extra specification of 6733 means that it isn't strictly
backwards compatible. In particular, 6733 says to send a zero'd payload
or none at all while 3588 says to send the offending AVP, despite the
fact that the peer will likely have equal difficulty in decoding it.
The testcases now fail, which will be remedied in subsequent commits.
|
|
There are still enslave/1 failures on some hosts despite a 2 minute
timetrap.
|
|
Such a length caused decode of a message with valid (24-bit) length to
fail. Note that the error detected is wrong: it should be 5014
(INVALID_AVP_LENGTH), not 3009 (INVALID_AVP_BITS). This will be dealt
with by OTP-11007.
|
|
Point was to test that Session-Id was not undefined. Instead, test case
send_error just returned false.
|
|
This is initially to identify the source of some flakiness on Windows.
|
|
Due to sporadic timeouts one some (slow) hosts.
|
|
In particular, have the resulting badmatch contain the starting and
ending time. There are still sporadic failures on slow hosts.
|
|
* anders/diameter/watchdog_leak/OTP-11019:
Minor doc fix
Add testcase to exercise reconnect behaviour
Fix watchdog table leak
|
|
|
|
|
|
In particular, remove timing dependence by using diameter_reg:wait/1 to
wait on the term registered by diameter_{tcp,sctp} when opening a
listening socket.
|
|
{error, Reason} is now returned, instead of the options being ignored.
Note that diameter:add_transport/2 purposely ignores unknown options and
that the behaviour is documented. This is historic: some users depend on
it in order to store their own options for identifying transport config,
instead of using the reference returned by add_transport.
|
|
* anders/diameter/app_not_configured/OTP-10972:
Fix faulty sequence validation
Add config suite
Deal with config errors detected at transport start less brutally
Move most transport_opt() validation into diameter_config
Minor doc/spec fix
Minor diameter_lib cleanup
|
|
To verify return values from diameter:start_service/2 and
diameter:add_transport/2 when passing various config.
|
|
Remove unused functions, add dialyzer specs, make wait/1 less fallible.
|
|
|
|
Instead of from the installation.
|
|
From compiler suite.
|
|
That is, code installed under examples/code in an installation.
|
|
Fix a broken include in example code, remove an inappropriate ct:pal/2
outside of a testcase, echo more info from test/Makefile.
|
|
|
|
|
|
RFC 6733 has changed the arity of Vendor-Id in this Grouped AVP, from 1*
in RFC 3588 to 1 in RFC 6773. This impacts the generated dictionary
modules: Vendor-Id is expected to be list-valued in the 3588 dictionary,
integer-valued in the 6733 dictionary. This, in turn, breaks the
independence of capabilities configuration on a service or transport
from the dictionary that will be used to encode an outgoing CER or CEA.
This commit fixes this by massaging any Vendor-Specific-Application-Id
config as appropriate when constructing CER or CEA for a given
dictionary.
|
|
|
|
Allow both share_peers and use_shared_peers to be a list of nodes, or a
function that returns a list of nodes.
|
|
|
|
Make it just a number of timeouts, without a new DWR being sent.
|
|
|
|
Count watchdog messages instead when this is an alternative.
|
|
Counters read by diameter:service_info(SvcName, transport) can be
selected at the same time as the diameter_stats server is folding them
into another key, possibly resulting in inaccurate values. Have
diameter_stats select from the server process to avoid this and add
diameter_stats:sum/1 to sum values from all contributors on a given
term.
|
