| Age | Commit message (Collapse) | Author |
|---|
|
Make anything but a comm_up sctp_assoc_change crash. Make timeouts more
reasonable.
|
|
Previously it was only run over TCP.
Configure a pool of accepting processes since simultaneous connections
are otherwise prone to rejection, as discussed in commit 4b691d8d.
Tweak timeouts to more reasonable values.
|
|
* anders/diameter/17.5.3/OTP-12702:
Fix broken pre-17.4 appup
Update appup for 17.5.3
vsn -> 1.9.1
|
|
* anders/diameter/counters/OTP-12701:
Add counters testcase to 3xxx suite
Fix counting error with unknown application id
Add missing doc wording
|
|
The send_error testcase tested that Session-Id in an answer-message was
not undefined, but that's always the case since the AVP has arity 0 or
1. The correct test is that it's a list of length 1, to ensure that
diameter has inserted the session id as expected.
|
|
To ensure that the expected answer messages are received.
|
|
Decode of an answer message not setting the E-bit, and containing
Experiment-Result but not Result-Code, identified Result-Code as the
erroneous when Erroneous-Result-Code was 3xxx. Here's an example (from
trace) of a the errors field after decode:
[{5004,
{diameter_avp,undefined,undefined,false,false,undefined,'Result-Code',
3001,undefined,undefined}}],
The diameter_avp was just constructed from the AVP name and decoded
result, without regard for which result code AVP contained the value.
Fix by extracting the AVP from the incoming message.
|
|
Upgrade instructions have been added for each 17.X release without
adjusting the instructions for preceeding releases: the instructions
have only been sufficient to upgrading one release at a time: 17.0 to
17.1, 17.1 to 17.2, etc.
Conficting load order requirements make smooth upgrade from an
arbitrarily old release impossible. In this case, 17.3 looks to be as
far back as we can go, so require restart from 17.[0-2] or older.
Update the app suite to deal with binary regexps in appup, and to match
version numbers harder.
|
|
To start checking that the counters are counting what's expected. The
parent commit fixes a case in which they weren't.
|
|
As for the port number in the parent commit, a FQDN can't be arbitrarily
long, at most 255 octets. Make decode fail if it's more.
|
|
A port number is a 16-bit integer, but the regexp used to parse it in
commit 1590920 slavishly followed the RFC 6733 grammar in matching an
arbitrary number of digits. Make decode fail if it's anything more than
5, to avoid doing erlang:list_to_integer/1 on arbitrarily large lists.
Also make it fail if the resulting integer is outside of the expected
range.
|
|
To bound the length of incoming messages that will be decoded. A message
longer than the specified number of bytes is discarded. An
incoming_maxlen_exceeded counter is incremented to make note of the
occurrence.
The motivation is to prevent a sufficiently malicious peer from
generating significant load by sending long messages with many AVPs for
diameter to decode. The 24-bit message length header accomodates
(16#FFFFFF - 20) div 12 = 1398099
Unsigned32 AVPs for example, which the current record-valued decode is
too slow with in practice. A bound of 16#FFFF bytes allows for 5461
small AVPs, which is probably more than enough for the majority of
applications, but the default is the full 16#FFFFFF.
|
|
It was possible to configure the option, but doing so caused the service
to fail when starting a watchdog process:
{function_clause,
[{diameter_service,'-spawn_opts/1-lc$^0/1-0-',
[false],
[{file,"base/diameter_service.erl"},{line,846}]},
{diameter_service,start,5,
[{file,"base/diameter_service.erl"},{line,820}]},
{diameter_service,start,3,
[{file,"base/diameter_service.erl"},{line,782}]},
{diameter_service,handle_call,3,
[{file,"base/diameter_service.erl"},{line,385}]},
{gen_server,try_handle_call,4,[{file,"gen_server.erl"},{line,607}]},
{gen_server,handle_msg,5,[{file,"gen_server.erl"},{line,639}]},
{proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,237}]}]}
Tests for the option in the config suite were also missing.
Bungled in commit 78b3dc6.
|
|
* anders/diameter/dpr/OTP-12609:
Discard incoming/outgoing requests after incoming DPR
Add transport_opt() dpr_timeout
Be lenient with errors in incoming DPR
|
|
Both RFC 3588 and 6733 disallow the combination. Make its encode fail.
|
|
* anders/diameter/string_decode/OTP-11952:
Let examples override default service options
Set {restrict_connections, false} in example server
Set {string_decode, false} in examples
Test {string_decode, false} in traffic suite
Add service_opt() string_decode
Strip potentially large terms when sending outgoing Diameter messages
Improve language consistency in diameter(1)
|
|
By adding string decode or not in the server or client as another
combination. Run all traffic cases in parallel: remove the sequential
tests. Common test seems unable to deal with {group, X, [parallel]}
within a group.
|
|
To control whether stringish Diameter types are decoded to string or
left as binary. The motivation is the same as in the parent commit: to
avoid large strings being copied when incoming Diameter messages are
passed between processes; or *if* in the case of messages destined for
handle_request and handle_answer callbacks, since these are decoded in
the dedicated processes that the callbacks take place in. It would be
possible to do something about other messages without requiring an
option, but disabling the decode is the most effective.
The value is a boolean(), true being the default for backwards
compatibility. Setting false causes both diameter_caps records and
decoded messages to contain binary() in relevant places that previously
had string(): diameter_app(3) callbacks need to be prepared for the
change.
The Diameter types affected are OctetString and the derived types that
can contain arbitrarily large values: OctetString, UTF8String,
DiameterIdentity, DiameterURI, IPFilterRule, and QoSFilterRule. Time and
Address are unaffected.
The DiameterURI decode has been redone using re(3), which both
simplifies and does away with a vulnerability resulting from the
conversion of arbitrary strings to atom.
The solution continues the use and abuse of the process dictionary for
encode/decode purposes, last seen in commit 0f9cdba.
|
|
To cause a peer connection to be closed following an outgoing DPA, in
case the peer fails to do so. It is the recipient of DPA that should
close the connection according to RFC 6733.
|
|
* anders/diameter/dpr/OTP-12542:
Discard CER or DWR sent with diameter:call/4
Allow DPR to be sent with diameter:call/4
Add transport_opt() dpa_timeout
Add testcase for sending DPR with diameter:call/4
|
|
To make the default DPA timeout configurable. The timeout say how many
milliseconds to wait for DPA in response to an outgoing DPR before
terminating the transport process regardless.
|
|
That currently fails when the resulting DPA is regarded as unsolicited
in diameter_peer_fsm, causing the request to timeout at the caller.
|
|
* anders/diameter/17/time/OTP-12439:
Adapt app suite to changes in time api
|
|
* anders/diameter/pool/OTP-12428:
Add pool_size test to config suite
|
|
Overlooked in commit 4b691d8d.
|
|
erlang:time_resolution/0 has been removed,
erlang:convert_time_resolution/3 has been renamed convert_time_unit, and
{os,erlang}:system_time/0,1 have been added. Modify the list of ignored
undefined function calls accordingly.
|
|
* anders/diameter/grouped_decode/OTP-12475:
Allow encode of decoded diameter_avp list
Add testcases for diameter_avp decode
Fix handling of length errors on Grouped AVPs
Don't discard component diameter_avp list on Grouped AVP decode error
Fix process dictionary manipulation during message decode
|
|
* anders/diameter/17/time/OTP-12439:
Ignore undefined calls to OTP 18 time api in app suite
|
|
* anders/diameter/time/OTP-12439:
Use new time api in test suites
Use new time api in implementation
|
|
* anders/diameter/pool/OTP-12428:
Fix SCTP match blunder in suites
Be backwards compatible with diameter_sctp listener state
Add gen_tcp testcase that fails sporadically
Simplify transport suite
Remove (ancient) dead code
Don't orphan slave nodes in example suite
Refresh example code
Improve language consistency in diameter(1)
Add pool suite to test transport_opt() pool_size
Adapt tcp/sctp transport modules for pool_size > 1
Add transport_opt() pool_size
|
|
|
|
So that the xref testcase is independent of the release it's run on. The
code uses the new time api if available, so as to be forward compatible.
|
|
Clause matching error for specific test cases was harmless since the
subsequent clause also matched. Errors detected by the server result in
Failed-AVP being sent, which should not lead to a decode error in the
client.
|
|
Outgoing answers missing a Result-Code AVP or setting an E-bit
inappropriately were discarded, but there's no particular reason for
doing so if the answer can be encoded, and the sender has no way of
knowing that their answer has been discarded. It's also inappropriate
that the message be discarded in the relay case. Answers are now sent,
and an error counter incremented.
|
|
More than an incoming message can contain ancillary data, which the
gen_sctp and transport suites did not expect. On FreeBSD 10, an
sctp_assoc_change event appears always to contain ancillary data.
|
|
Where it's less important to do so, but it has to be done at some point
since erlang:now/0 is deprecated. As in the parent commit, continue to
use the old api if the new one is unavailable.
|
|
On OS X at least. The testcase opens a listening socket, spawns 8
processes that call gen_tcp:accept/1, waits a couple of seconds, and
then spawns 8 processes that call gen_tcp:connect/3. Some of these
occasionally return {error, econnreset}.
|
|
Using the fact that transport processes can now be started concurrently.
The suite serialized starts itself when pretending to be diameter
starting a transport process.
|
|
Stops were aborted at the first failure.
|
|
With testcases that uses restrict_connections and pool_size config to
establish multiple connections between two Diameter nodes, checking for
the expected number of transport processes using
diameter:service_info/2.
|
|
The connect timer is currently ignored by a connecting transport,
so the check causes one testcase to fail.
|
|
The timer was renamed in commit abea7186.
|
|
* anders/diameter/dictionaries/OTP-11958:
Fix broken check for undefined AVPs in @codec and @custom_types
Add @codecs and @custom_types tests to compiler suite
|
|
Dictionary compilation fails to detect undefined AVPs in these sections.
|
|
* anders/diameter/Failed-AVP/OTP-11936:
Do best-effort decode of Failed-AVP
Add a testcase that expects a decoded value in Failed-AVP
|
|
* anders/diameter/5014/OTP-11946:
Fix handling of AVP length errors (5014) in unknown AVPs
Add testcases that send unknown AVPs with a bad AVP Length
|
|
This isn't currently the case, but soon will be.
|
|
In particular, a length that points past the end of the message. This
goes undetected there is some other problem with the AVP (eg. M-bit),
which is a problem we're about to fix.
|
|
* anders/diameter/sctp/OTP-11901:
Fix diameter_sctp function_clause
Anchor path regexps in examples suite
Run examples suite over both TCP and SCTP
|
|
* anders/diameter/request_leak/OTP-11893:
Fix leaking request table
Add check that request table is empty to failover suite
Comment fix
|
