| Age | Commit message (Collapse) | Author |
|---|
|
* anders/diameter/17.3_release/OTP-12093:
Add recompilation admonition to 17.2 release notes
|
|
* anders/diameter/Failed-AVP/OTP-12094:
Fix ?MODULE in preprocessed dictionary forms
|
|
That dictionaries need to be recompiled, which is the case whenever
diameter_gen.hrl is modified.
|
|
By replacing literal diameter_gen_relay atoms in forms extracted from
that module by the name of the module in question. This has been wrong
for some time, but only became noticable when the parent commit started
using ?MODULE as more than a process dictionary key or tag to match on.
In particular, the function dict/1 in diameter_gen.hrl (included by
every dictionary module) can now return ?MODULE, which is (not
surprisingly) expected to be the name of the dictionary module in
question. It wasn't in the case of a module compiled from forms: it was
diameter_gen_relay, since that's the module the forms were extracted
from.
The fix only affects dictionaries compiled from forms, as returned by
diameter_make:codec/2. In particular, dictionaries compiled from Erlang
source returned by this function, or by diameterc(1), are unaffected.
|
|
* anders/diameter/17.3_release/OTP-12093:
vsn -> 1.7.1
Update appup for OTP-12094
Update appup for OTP-12080
Update appup for OTP-12069
|
|
* anders/diameter/5014/OTP-12074:
Don't leave extra bit in decoded AVP data
|
|
* anders/diameter/Failed-AVP/OTP-12094:
Fix best effort decode of Failed-AVP
Fix decode of Failed-AVP in RFC 3588 answer-message
|
|
* anders/diameter/counters/OTP-12080:
Fix counters for answer-message
Count relayed messages on {relay, Rbit}
Count request retransmissions
Fix counting of outgoing requests
|
|
The bit is added in diameter_codec to induce a decode error in the case
of 5014 errors, but was not removed before returning the decoded result.
Code examining the binary data in a diameter_avp record would then see
the extra bit.
|
|
|
|
diameter_codec must be loaded before diameter_traffic.
|
|
|
|
|
|
Commit c2c00fdd didn't get it quite right: it only decoded failed AVPs
in the common dictionary since it's this dictionary an answer-message is
decoded in. An extra dictionary isn't something that's easily passed
through the decode without rewriting dictionary compilation however, and
that's no small job, so continue with the use/abuse of the process
dictionary by storing the dictionary module for the decode to retrieve.
This is one step worse than previous uses since the dictionary is put in
one module (diameter_codec) and got in another (the dictionary module),
but it's the lesser of two evils.
|
|
Commit 066544fa had the unintended consequence of breaking the decode of
Failed-AVP in answer-message as defined in the RFC 3588, since the
grammar doesn't list Failed-AVP as an explicit component AVP, in
contrast to the RFC 6733 grammar, which does. Handle this case
explicitly, as an exception, just as with Failed-AVP as parent AVP.
|
|
An answer message that sets the E-bit is encoded/decoded with Diameter
common dictionary, using the answer-message grammar specified in the
RFC. However, the dictionary of the application in question is the one
that knows the command code of the message. Commit df19c272 didn't make
this distinction when incrementing counters for an answer-message, using
the common dictionary for both purposes, causing the message to be
counted as unknown. This commit remedies that.
|
|
That is, instead of including the list in a diameter:service_info/2 info
tuple, only include the number of references and the number of bytes
referenced. The list itself can be quite large and typically isn't that
interesting, at least not to a diameter user.
|
|
Instead of grouping them with 'unknown'. These messages were keyed on
{ApplicationId, CommandCode, Rbit} prior to commit df19c272, but
distinguishing between the relay application and others is probably more
useful.
The only reason for not including the R-bit in the unknown key is that
the key is also used elsewhere, and relay is an expected case while
unknown isn't.
|
|
As mentioned in the parent commit. The {Id, send, retransmission}
key is of the same form as the {Id, send|recv, error} key used for
encode/decode errors.
|
|
Commit df19c272 broke this in avoiding counting on arbitrary keys.
It didn't break it sufficiently for the only counters usage in the test
suites to fail however: watchdog counters worked as intended, but no
others, not even CER and DPR. More testcases are needed.
This commit does change/fix the previous semantics somewhat:
- Retransmissions are no longer counted. This previously made it
impossible to distinguish between these and unanswered requests, since
both counted as an outgoing request. There should probably be a
retransmission counter but it should be distinct from the sent request
counter.
- The counting is always on the node from which diameter:call/4 is
invoked, not the node on which the transport resides, as was previously
the case. (Although they're typically one and the same.)
Note that none of these semantics are documented as yet, so we're not
changing a documented interface.
|
|
To extract only process info from connections info, which can be useful
to reduce the amount of information returned.
Choose 'info' for the item since process_info is more than one word: all
others are one. Don't choose memory since it's too specific: might want
to use it for more.
|
|
To show process_info of interest. This is not yet documented since it
may well change.
|
|
To return sizes of named ets tables.
|
|
|
|
|
|
|
|
* anders/diameter/dictionaries/OTP-11958:
Fix broken check for undefined AVPs in @codec and @custom_types
Add @codecs and @custom_types tests to compiler suite
|
|
Instead of detecting the error, code generation failed when attempting
to lookup the type of an undefined AVP.
|
|
Dictionary compilation fails to detect undefined AVPs in these sections.
|
|
* anders/diameter/17.1/OTP-11943:
Update appup for OTP-11946, OTP-11936: 5014, Failed-AVP decode
Update appup for OTP-11938: terminate watchdog after DPR reception
Update appup for OTP-11721: log and counter hardening
Update appup for OTP-11937: counters
Update appup for OTP-11901: diameter_sctp function_clause
Update appup for OTP-11934: watchdog process leak
Update appup for OTP-11893: request table leak
Update appup for OTP-11891: result code counters for CEA/DWA/DPA
vsn -> 1.7
Fix broken release note for diameter-1.4.4
|
|
* anders/diameter/hardening/OTP-11721:
Change answer_errors default from report to discard
|
|
Modules: diameter_watchdog, diameter_peer_fsm
diameter_watchdog must be loaded first.
|
|
Modules: diameter_codec, diameter_peer_fsm, diameter_watchdog,
diameter_traffic, diameter_service, diameter_lib,
dictionary modules
diameter_lib and diameter_traffic (in that order) must be loaded first.
diameter_codec last must be loaded before diameter_peer_fsm and
diameter_watchdog.
|
|
Modules: diameter_peer_fsm, diameter_watchdog, diameter_codec,
diameter_traffic
diameter_traffic must be loaded first.
|
|
|
|
Modules: diameter_service
|
|
Modules: diameter_traffic, diameter_peer_fsm, diameter_watchdog
diameter_traffic must be loaded first.
|
|
|
|
Those were bug fixes, not known issues.
|
|
In the same vein as commit 00584303, to avoid logging traffic-related
happenings.
Not that the value in diameter.hrl is just documentation: the value is
set explicitly when diameter:start_service/2 creates diameter_app
records.
|
|
* anders/diameter/Failed-AVP/OTP-11936:
Do best-effort decode of Failed-AVP
Add a testcase that expects a decoded value in Failed-AVP
|
|
* anders/diameter/5014/OTP-11946:
Fix handling of AVP length errors (5014) in unknown AVPs
Add testcases that send unknown AVPs with a bad AVP Length
|
|
* anders/diameter/hardening/OTP-11721:
Simplify example server
Make example server answer unsupported requests with 3001
Make example code quiet
Don't count messages on arbitrary keys
Replace traffic-related log reports with no-op function calls
|
|
Commit 4ce2d3a6 (diameter-1.4.2, OTP-11007) disabled the decode of
values in Failed-AVP components since any error caused the decode of
Failed-AVP itself to fail. This is less than useful since (1) we should
be able to decode it given that we've sent it (modulo mangling on the
way to the peer and back), and (2) it's not unheard of to examine
Failed-AVP to see what the peer objected to.
This commits adds a best-effort decode: decode if possible, otherwise
not, using the same abuse of the process dictionary as commit bbdb027c.
|
|
This isn't currently the case, but soon will be.
|
|
Commit 4ce2d3a6 added the insertion of a single bit into binary AVP data
to induce an encode error in the case of a header length that pointed
past the available bytes: a 5014 = DIAMETER_INVALID_AVP_LENGTH error.
Commit 838856b fixed this for stringish Diameter types, but both commits
neglected the case in which the offending AVP isn't known to the
dictionary in question. Unless the AVP was regarded as erroneous for
other reasons (eg. an M-bit resulting in 5001) it would be happily be
packed into an 'AVP' field. If it was regarded as an error, the record
could be passed back to diameter_codec:pack_avp/1, and if the record
contained header data then there was no clause to deal with the
unpleasantry.
Deal with it by having the dictionary module strip the extra bit and
flag the AVP as 5014, and by having diameter_codec handle any extra bit
coming from an dictionary compiled against an old diameter_gen. An old
dictionary won't detect 5014 however, so dictionaries should be
recompiled.
Change most of the guards in diameter_codec from is_bitstring/1 to
is_binary/1. What's being passed to the decode functions are binaries
received other the network. The only case in which a non-binary
bitstring is when we've placed an extra bit there ourselves. (Modulo
someone doing something they shouldn't.)
|
|
In particular, a length that points past the end of the message. This
goes undetected there is some other problem with the AVP (eg. M-bit),
which is a problem we're about to fix.
|
|
In particular, remove the unnecessary list-or-record answer.
|
|
As it should. The previous discard (surely) pre-dated being able to
return {answer_message, 3001} from a handle_request callback.
|
|
The output could make it impossible to use the shell. Counters returned
diameter:service_info/2 can be used to check for expected happenings.
|
