| Age | Commit message (Collapse) | Author |
|---|
|
|
|
In commit b8c6a119.
|
|
|
|
|
|
|
|
* anders/diameter/17.5.6.8/OTP-13212:
vsn -> 1.9.2.3
Update appup for 17.5.6.8
|
|
|
|
|
|
Each service process maintains a dictionary of peers, mapping an
application alias to a {pid(), #diameter_caps{}} list of connected
peers. These lists are potentially large, peers were appended to the end
of the list for no particular reason, and these long lists were
constructed/deconstructed when filtering them for pick_peer callbacks.
Many simultaneous outgoing request could then slow the VM to a crawl,
with many scheduled processes mired in list manipulation.
The pseudo-dicts are now replaced by plain ets tables. The reason for
them was (once upon a time) to have an interface interchangeable with a
plain dict for debugging purposes, but strict swapablity hasn't been the
case for some time now, and in practice a swap has never taken place.
Additional tables mapping Origin-Host/Realm have also been introduced,
to minimize the size of the peers lists when peers are filtered on
host/realm. For example, a filter like
{any, [{all, [realm, host]}, realm]}
is probably a very common case: preferring a Destination-Realm/Host
match before falling back on Destination-Realm alone. This is now more
efficiently (but not equivalently) expressed as
{first, [{all, [realm, host]}, realm]}
to stop the search when the best match is made, and extracts peers from
host/realm tables instead of searching through the list of all peers
supporting the application in question. The code to try and start with a
lookup isn't exhaustive, and the 'any' filter is still as inefficient as
previously.
|
|
See commit 862af31d.
|
|
|
|
OTP-13164 more efficient peer lists
One module. Downgrade not supported.
|
|
|
|
* anders/diameter/17.5.6.7/OTP-13211:
vsn -> 1.9.2.2
Update/fix appup for 17.5.6.7
Be resilient to diameter_service state upgrades
|
|
* anders/diameter/request_leak/OTP-13137:
Fix request table leak at retransmission
Fix request table leak at exit signal
|
|
|
|
OTP-12947 strict_mbit
OTP-12969 watchdog function_clause
OTP-13137 request leak
diameter_config (that allows the new option) should be loaded after the
others.
Anchor was missing from one regexp. Patches did not accumulate through
older versions.
|
|
By not failing in code that looks up state: pick_peer and service_info.
|
|
=== OTP-18.2 ===
Changed Applications:
- asn1-4.0.1
- common_test-1.11.1
- compiler-6.0.2
- crypto-3.6.2
- dialyzer-2.8.2
- diameter-1.11.1
- erl_docgen-0.4.1
- erl_interface-3.8.1
- erts-7.2
- eunit-2.2.12
- hipe-3.14
- inets-6.1
- jinterface-1.6.1
- kernel-4.1.1
- observer-2.1.1
- parsetools-2.1.1
- public_key-1.1
- runtime_tools-1.9.2
- sasl-2.6.1
- snmp-5.2.1
- ssh-4.2
- ssl-7.2
- stdlib-2.7
- test_server-3.9.1
- tools-2.8.2
- typer-0.9.10
- wx-1.6
- xmerl-1.3.9
Unchanged Applications:
- cosEvent-2.2
- cosEventDomain-1.2
- cosFileTransfer-1.2
- cosNotification-1.2
- cosProperty-1.2
- cosTime-1.2
- cosTransactions-1.3
- debugger-4.1.1
- edoc-0.7.17
- eldap-1.2
- et-1.5.1
- gs-1.6
- ic-4.4
- megaco-3.18
- mnesia-4.13.2
- odbc-2.11.1
- orber-3.8
- os_mon-2.4
- ose-1.1
- otp_mibs-1.1
- percept-0.8.11
- reltool-0.7
- syntax_tools-1.7
- webtool-0.9
Conflicts:
OTP_VERSION
erts/vsn.mk
|
|
|
|
|
|
* anders/diameter/18.2/OTP-13180:
vsn -> 1.11.1
Update appup for 18.2
|
|
* anders/diameter/request_leak/OTP-13137:
Fix request table leak at retransmission
Fix request table leak at exit signal
|
|
In the case of retranmission, a prepare_retransmit callback could modify
End-to-End and/or Hop-by-Hop identifiers so that the resulting
diameter_request entry was not removed, since the removal was of entries
with the identifiers of the original request. The chances someone doing
this in practice are probably minimal.
|
|
The storing of request records in the ets table diameter_request was
wrapped in a try/after so that the latter would unconditionally remove
written entries. The problem is that it didn't deal with the process
exiting as a result of an exit signal, since this doesn't raise in an
exception. Since the process in question applies callbacks to user code,
we can potentially be linked to other process and exit as a result.
Trapping exits changes the current behaviour of the process, so spawn a
monitoring process that cleans up upon reception of 'DOWN'.
|
|
|
|
OTP-13137 request table leak
No load order requirements (one file).
|
|
Record field types have been modified due to commit 8ce35b2:
"Take out automatic insertion of 'undefined' from typed record fields".
|
|
|
|
* anders/diameter/18.1/OTP-12978:
Remove 1.11 release notes
|
|
These were added manually in merge commit 8c5d719a, but that was wrong:
the notes will be generated.
Note that OTP-12791 in the comment for commit 5a339bcb is wrong: it's
OTP-12891.
|
|
* anders/diameter/18.1/OTP-12978:
Update appup for 18.1
|
|
* anders/diameter/watchdog/OTP-12969:
Fix watchdog function_clause
|
|
* anders/diameter/M-bit/OTP-12947:
Add service_opt() strict_mbit
|
|
OTP-12947 strict_mbit service_opt()
OTP-12969 diameter_watchdog function_clause
No load order requirements.
|
|
Commit 4f365c07 introduced the error on set_watchdog/2, as a consequence
of timeout/1 returning stop, which only happens with accepting
transports with {restrict_connections, false}.
|
|
Commit 4f365c07 introduced the error on set_watchdog/2, as a consequence
of timeout/1 returning stop, which only happens with accepting
transports with {restrict_connections, false}.
|
|
There are differing opinions on whether or not reception of an arbitrary
AVP setting the M-bit is an error. 1.3.4 of RFC 6733 says this about
how an existing Diameter application may be modified:
o The M-bit allows the sender to indicate to the receiver whether or
not understanding the semantics of an AVP and its content is
mandatory. If the M-bit is set by the sender and the receiver
does not understand the AVP or the values carried within that AVP,
then a failure is generated (see Section 7).
It is the decision of the protocol designer when to develop a new
Diameter application rather than extending Diameter in other ways.
However, a new Diameter application MUST be created when one or more
of the following criteria are met:
M-bit Setting
An AVP with the M-bit in the MUST column of the AVP flag table is
added to an existing Command/Application. An AVP with the M-bit
in the MAY column of the AVP flag table is added to an existing
Command/Application.
The point here is presumably interoperability: that the command grammar
should specify explicitly what mandatory AVPs much be understood, and
that anything more is an error.
On the other hand, 3.2 says thus about command grammars:
avp-name = avp-spec / "AVP"
; The string "AVP" stands for *any* arbitrary AVP
; Name, not otherwise listed in that Command Code
; definition. The inclusion of this string
; is recommended for all CCFs to allow for
; extensibility.
This renders 1.3.4 pointless unless "*any* AVP" is qualified by "not
setting the M-bit", since the sender can effectively violate 1.3.4
without this necessitating an error at the receiver. If clients add
arbitrary AVPs setting the M-bit then request handling becomes more
implementation-dependent.
The current interpretation in diameter is strict: if a command grammar
doesn't explicitly allow an AVP setting the M-bit then reception of such
an AVP is regarded as an error. The strict_mbit option now allows this
behaviour to be changed, false turning all responsibility for the M-bit
over to the user.
|
|
Broken in the parent commit.
|
|
The diffs are all about adapting to the OTP 18 time interface. The code
was previously backwards compatible, falling back on the erlang:now/0 if
erlang:monotonic_time/0 is unavailable, but this was seen to be a bad
thing in commit 9c0f2f2c. Use of erlang:now/0 is now removed.
|
|
|
|
* anders/diameter/17.5.6.3/OTP-12927:
vsn -> 1.9.2.1
Update appup for 17.5.6.3
|
|
* anders/diameter/17/time/OTP-12926:
Simplify time manipulation
Remove use of monotonic time in pre-18 code
Remove unnecessary redefinition of erlang:max/2
|
|
* anders/diameter/grouped_errors/OTP-12930:
Fix decode of Grouped AVPs containing errors
Simplify logic
Simplify logic
|
|
* anders/diameter/transport/OTP-12929:
Fix start order of alternate transports
Log discarded answers
|
|
* anders/diameter/lcnt/OTP-12912:
Make ets diameter_stats a set
Remove unnecessary sorting in stats suite
Set ets {write_concurrency, true} on diameter_stats
Don't start watchdog timers unnecessarily
Remove unnecessary erlang:monitor/2 qualification
Add missing watchdog suite clause
|
|
* anders/diameter/caseless/OTP-12902:
Match allowable peer addresses case insensitively
Replace calls to module inet_parse to equivalents in inet
|
|
* anders/diameter/grouped_decode/OTP-12879:
Fix relay encode of decoded diameter_avp lists
|
|
There's no need for it to be ordered, and the ordering has been seen to
have an unexpectedly negative impact on performance in some cases. Order
when retrieving statistics instead, so as not to change the
presentation in diameter:service_info/2.
|
|
The ordering of (ets) diameter_stats (also unnecessary) ensures the
sorting.
|
