Age | Commit message (Collapse) | Author |
|
* anders/diameter/caseless/OTP-12902:
Match allowable peer addresses case insensitively
Replace calls to module inet_parse to equivalents in inet
|
|
* anders/diameter/grouped_decode/OTP-12879:
Fix relay encode of decoded diameter_avp lists
|
|
Commit c74b593a fixed the problem that a decoded deep diameter_avp list
couldn't be encoded, but did so in the wrong way: there's no need to
reencode component AVPs since the Grouped AVP itself already contains
the encoded binary. The blunder caused diameter_codec:pack_avp/1 to fail
if the first element of the AVP list to be encoded was itself a list.
Thanks to Andrzej TrawiĆski for reporting the problem.
|
|
Both diameter_tcp and diameter_sctp can be configured with one or more
IP addresses from which connections should be accepted (an 'accept'
tuple), specified either as a tuple-valued address or as a regular
expression. In the latter case, peer addresses are mapped to string
using inet:ntoa/1 and the result matched against the regexp. Since
(ipv6) addresses are case insensitive, this should also be the case with
the match, but was not.
|
|
Commits b563c796 (R16B) and 0fad6449 (R16B02) added parse_address/1 and
ntoa/1 to module inet, providing documented alternatives to address/1
and ntoa/1 in the undocumented (save comments in inet(3)) inet_parse.
|
|
This has had a hugely negative impact on performance when decoding
messages containing many AVP: each decode of an AVP having variable
arity computed the length of the list of previously decoded AVPs when
checking that the allowed arity was not exceeded, even if the allowed
arity was infinite, making for O(n^2) cost. Here are some execution
times, for diameter_codec:decode/2 on a representative message with n
integer AVPs in the Common application (on the host at hand):
Before After
------- ---------
n = 1K 5 ms 2 ms
n = 10K 500 ms 25 ms
n = 100K 75 sec 225 ms
n = 1M 2.6 sec
Note the nearly linear increase following the change.
Remove the dire documentation warning for incoming_maxlen as a
consequence. It can still be useful to set, but not doing so won't have
the same consequences as previously.
|
|
Since the list can potentially be long.
|
|
The decode of an incoming Diameter message uses the record
representation to determine whether or not an AVP has been received with
the expected arity, the number of AVPs in each field following decode
being compared with the arity specified in the message grammar. The
problem with this is that decode failure isn't reflected in the record
representation, so that an AVP can be appended to the errors field of a
diameter_packet record despite an entry for the same AVP already
existing. This isn't a fault as much as a misleading error indication,
but now only append AVPs that aren't already represented.
|
|
The warning report was removed in commit 00584303.
|
|
Last visited in commit 00584303.
|
|
|
|
* anders/diameter/test/OTP-12767:
Replace config suite call to erlang:now/0
Fix incorrect suite usage of OTP 18 monotonic time
Make tls suite crash more verbosely
|
|
* anders/diameter/17.5.5/OTP-12757:
vsn -> 1.9.2
Update appup for 17.5.5
Fix mangled release note
|
|
* anders/diameter/sctp/OTP-12744:
Fix diameter_sctp listener race
Tweak transport suite failures
Run traffic suite over SCTP
|
|
Commit 4b691d8d made it possible for accepting transport processes to be
started concurrently, and commit 77c1b162 adapted diameter_sctp to this,
but missed that the publication of the listener process in diameter_reg
has to precede the return of its start function. As a result, concurrent
starts could result in multiple listener processes.
|
|
Make anything but a comm_up sctp_assoc_change crash. Make timeouts more
reasonable.
|
|
Previously it was only run over TCP.
Configure a pool of accepting processes since simultaneous connections
are otherwise prone to rejection, as discussed in commit 4b691d8d.
Tweak timeouts to more reasonable values.
|
|
To remove a compilation warning with OTP 18.
|
|
Value was used as strictly increasing when it's only non-decreasing,
causing testcases to fail.
|
|
To see why it's failing on at least one test machine.
|
|
|
|
- OTP-12741: disfunctional counters
- OTP-12744: diameter_sctp race
No load order requirements.
|
|
|
|
The message was regarded as unknown if the answer message in question
set the E-bit and the application dictionary was not the common
dictionary.
|
|
That is, outgoing answer messages received in response to a
handle_request callback having returned {relay, Opts}.
|
|
To clarify what it is that's being computed, which isn't entirely
obvious. No functional change, just renaming.
|
|
As the first step in starting to count outgoing, relayed answer
messages.
|
|
An incoming Diameter message is either a request, an answer to an
outstanding request, or an unexpected answer. The latter weren't
counted, but are now counted on keys of this form:
{pid(), {{unknown, 0}, recv, discarded}}
The form of the second element is similar to those of other counters,
like:
{{relay, 0|1}, send|recv, invalid_error_bit}
Compare this to the key used when counting known answers:
{{ApplicationId, CommandCode, 0}, recv}
The application id and command code aren't included so as not to count
on arbitrary keys, a topic last visited in commit 49e8b11c.
|
|
To differentiate between requests and answers, in analogy with relay
counters. This isn't backwards compatible, but these counters aren't yet
documented.
|
|
Commit 49e8b11c broke the counting of relayed message, causing them to
be accumulated as unknown messages.
|
|
Commit a1df50b3 broke result code counters in the case of answer
messages sent as a header/avp lists (unless the avps, untypically, set
the name field), and for answers sent/received in the relay application.
|
|
Which fails for a variety of reasons to be addressed in subsequent
commits.
|
|
|
|
* anders/diameter/17.5.3/OTP-12702:
Fix broken pre-17.4 appup
Update appup for 17.5.3
vsn -> 1.9.1
|
|
* anders/diameter/counters/OTP-12701:
Add counters testcase to 3xxx suite
Fix counting error with unknown application id
Add missing doc wording
|
|
* anders/diameter/result_codes/OTP-12654:
Fix broken traffic testcase
Match harder in traffic suite
Don't confuse Result-Code and Experimental-Result
|
|
The send_error testcase tested that Session-Id in an answer-message was
not undefined, but that's always the case since the AVP has arity 0 or
1. The correct test is that it's a list of length 1, to ensure that
diameter has inserted the session id as expected.
|
|
To ensure that the expected answer messages are received.
|
|
Decode of an answer message not setting the E-bit, and containing
Experiment-Result but not Result-Code, identified Result-Code as the
erroneous when Erroneous-Result-Code was 3xxx. Here's an example (from
trace) of a the errors field after decode:
[{5004,
{diameter_avp,undefined,undefined,false,false,undefined,'Result-Code',
3001,undefined,undefined}}],
The diameter_avp was just constructed from the AVP name and decoded
result, without regard for which result code AVP contained the value.
Fix by extracting the AVP from the incoming message.
|
|
Upgrade instructions have been added for each 17.X release without
adjusting the instructions for preceeding releases: the instructions
have only been sufficient to upgrading one release at a time: 17.0 to
17.1, 17.1 to 17.2, etc.
Conficting load order requirements make smooth upgrade from an
arbitrarily old release impossible. In this case, 17.3 looks to be as
far back as we can go, so require restart from 17.[0-2] or older.
Update the app suite to deal with binary regexps in appup, and to match
version numbers harder.
|
|
Required load order by ticket.
- OTP-12642, extra bit in diameter_avp.data
- OTP-12654, Result-Code/Experimental-Result confusion
- OTP-12701, counting error with unknown Application Id
none
|
|
To start checking that the counters are counting what's expected. The
parent commit fixes a case in which they weren't.
|
|
Statistics could be accumulated on a key like {{23,275,0}, recv} even
though 23 was not the application id of the dictionary in question.
Missed in commits df19c272 and 7816ab2f.
|
|
|
|
|
|
In the case of a faulty AVP Length (pointing past the end of a message
or not spanning the header), an extra bit is prepended to data bytes in
diameter_avp:collect_avps/1 in order to force a 5014 decode error. The
bit is supposed to be removed as part of the decode in diameter_gen.hrl
but this didn't happen in case of an AVP that unknown to the dictionary
in question.
|
|
|
|
The function is intended to be traced on, to see abnormalities (mostly)
without producing excessive output. In the case of decode failure, the
error reason can be things like {badmatch, HugeBinary}.
Missed in commit 0058430.
|
|
As for the port number in the parent commit, a FQDN can't be arbitrarily
long, at most 255 octets. Make decode fail if it's more.
|
|
A port number is a 16-bit integer, but the regexp used to parse it in
commit 1590920 slavishly followed the RFC 6733 grammar in matching an
arbitrary number of digits. Make decode fail if it's anything more than
5, to avoid doing erlang:list_to_integer/1 on arbitrarily large lists.
Also make it fail if the resulting integer is outside of the expected
range.
|