aboutsummaryrefslogtreecommitdiffstats
path: root/lib/hipe/main
AgeCommit message (Collapse)Author
2018-01-03Fix bug in hipe primop bs_put_utf8Sverker Eriksson
by preventing it from doing GC, which generated code relies on.
2017-11-03Fix bug in hipe for <<X/utf32>>Sverker Eriksson
by introducing new primop 'is_unicode' with no exception (ab)use and no GC. Replaces bs_validate_unicode which is kept for backward compat for now.
2017-09-19Update runtime deps to depend on new stdlib functionalityDan Gudmundsson
~tw and new string functions are new since OTP-20 (stdlib-3.4)
2017-05-04Update copyright yearRaimo Niskanen
2017-03-16hipe: Add range splitter range_splitMagnus Lång
hipe_range_split is a complex live range splitter, more sophisticated thatn hipe_restore_reuse, but still targeted specifically at temporaries forced onto stack by being live over call instructions. hipe_range_split partitions the control flow graph at call instructions, like hipe_regalloc_prepass. Splitting decisions are made on a per partition and per temporary basis. There are three different ways in which hipe_range_split may choose to split a temporary in a program partition: * Mode1: Spill the temp before calls, and restore it after them * Mode2: Spill the temp after definitions, restore it after calls * Mode3: Spill the temp after definitions, restore it before uses To pick which of these should be used for each temp×partiton pair, hipe_range_split uses a cost function. The cost is simply the sum of the cost of all expected stack accesses, and the cost for an individual stack access is based on the probability weight of the basic block that it resides in. This biases the range splitter so that it attempts moving stack accesses from a functions hot path to the cold path. hipe_bb_weights is used to compute the probability weights. mode3 is effectively the same as what hipe_restore_reuse does. Because of this, hipe_restore_reuse reuses the analysis pass of hipe_restore_reuse in order to compute the minimal needed set of spills and restores. The reason mode3 was introduced to hipe_range_split rather than simply composing it with hipe_restore_reuse (by running both) is that such a composition resulted in poor register allocation results due to insufficiently strong move coalescing in the register allocator. The cost function heuristic has a couple of tuning knobs: * {range_split_min_gain, Gain} (default: 1.1, range: [0.0, inf)) The minimum proportional improvement that the cost of all stack accesses to a temp must display in order for that temp to be split. * {range_split_mode1_fudge, Factor} (default: 1.1, range: [0.0, inf)) Costs for mode1 are multiplied by this factor in order to discourage it when it provides marginal benefits. The justification is that mode1 causes temps to be live for longest, thus leading to higher register pressure. * {range_split_weight_power, Factor} (default: 2, range: (0.0, inf)) Adjusts how much effect the basic block weights have on the cost of a stack access. A stack access in a block with weight 1.0 has cost 1.0, a stack access in a block with weight 0.01 has cost 1/Factor. Additionally, the option range_split_weights chooses whether the basic block weights are used at all. In the case that the input is very big, hipe_range_split automatically falls back to hipe_restore_reuse only in order to keep compile times under control. Note that this is not only because of hipe_range_split being slow, but also due to the resulting program being slow to register allocate, and is not as partitionable by hipe_regalloc_prepass. hipe_restore_reuse, on the other hand, does not affect the programs partitionability. The hipe_range_split pass is controlled by a new option ra_range_split. ra_range_split is added to o2, and ra_restore_reuse is disabled in o2.
2017-03-16hipe: Add module computing basic blocks weightsMagnus Lång
hipe_bb_weights computes basic block weights by using the branch probability predictions as the coefficients in a linear equation system. This linear equation system is then solved using Gauss-Jordan Elimination. The equation system representation is picked to be efficient with highly sparse data. During triangelisation, the remaining equations are dynamically reordered in order to prevent the equations from growing in the common case, preserving the benefit of the sparse equation representation. In the case that the input is very big, hipe_bb_weights automatically falls back to a rough approximation in order to keep compile times under control.
2017-03-16hipe: Add range splitter restore_reuseMagnus Lång
hipe_restore_reuse is a simplistic range splitter that splits temps that are forced onto the stack by being live over call instructions. In particular, it attempts to avoid cases where there are several accesses to such stack allocated temps in straight-line code, uninterrupted by any calls. In order to achieve this it splits temps between just before the first access(es) and just after the last access(es) in such straight-line code groups. The hipe_restore_reuse pass is controlled by a new option ra_restore_reuse. ra_restore_reuse is added to o1.
2017-03-16hipe: Extract disjoint sets to its own moduleMagnus Lång
2017-02-19ErLLVM: Demand LLVM 3.9 or greaterMagnus Lång
2017-02-06Update use of filename:find_src/1 in hipe.erlRichard Carlsson
2016-11-25Merge branch 'richarl/fix-license-headers/PR-788'Björn Gustavsson
* richarl/fix-license-headers/PR-788: Make use of the Header feature in yecc Remove Emacs timestamp markers Remove obsolete CVS keyword markup Update obsolete author e-mails Replace broken example URL Add missing entries to COPYRIGHT file Correct copyright on stdlib files Add license headers to hipe files in kernel Correct copyright info on typer files Correct copyright and license on dialyzer files Correct copyright on remaining hipe files Correct copyright info on hipe cerl files Correct copyright info on cerl-related files Correct the copyright info in docgen_edoc_xml_cb Update Syntax Tools license headers Remove some obsolete files Update EDoc license headers to dual Apache2/LGPL Update EUnit license headers to dual Apache2/LGPL
2016-11-23Correct copyright on remaining hipe filesRichard Carlsson
2016-11-23Merge branch 'maint'Sverker Eriksson
2016-11-19hipe: Improve error message on internal crashesMagnus Lång
Print the MFA/module being compiled, and pretty-print the backtrace with lib:format_stacktrace/4. Additionally, make the error_msg/2 macro in hipe.hrl respect the HIPE_LOGGING define, since messages produced by this macro just before runtime shutdown were sometimes lost (since code_server:error_msg/2 is asynchronous).
2016-09-29Merge branch 'rickard/time-unit/OTP-13831'Rickard Green
* rickard/time-unit/OTP-13831: Replace usage of deprecated time units
2016-09-05hipe: Add ra_partitioned to o1 and upMagnus Lång
ra_partitioned significantly speeds up register allocation of larger functions without affecting allocation quality negatively. This is the final change needed to make o1 suitable for compiling really large functions without choking.
2016-09-02hipe_ppc: Add code rewrite RA callbacksMagnus Lång
These will not only be useful for hipe_regalloc_prepass, but also, after the introduction of a mk_move/2 (or similar) callback, for the purpose of range splitting. Since the substitution needed to case over all the instructions, a new module, hipe_ppc_subst, was introduced to the ppc backend.
2016-09-02hipe_sparc: Add code rewrite RA callbacksMagnus Lång
These will not only be useful for hipe_regalloc_prepass, but also, after the introduction of a mk_move/2 (or similar) callback, for the purpose of range splitting. Since the substitution needed to case over all the instructions, a new module, hipe_sparc_subst, was introduced to the sparc backend.
2016-09-02hipe_arm: Add code rewrite RA callbacksMagnus Lång
These will not only be useful for hipe_regalloc_prepass, but also, after the introduction of a mk_move/2 (or similar) callback, for the purpose of range splitting. Since the substitution needed to case over all the instructions, a new module, hipe_arm_subst, was introduced to the arm backend.
2016-09-02hipe_x86: Add code rewrite RA callbacksMagnus Lång
These will not only be useful for hipe_regalloc_prepass, but also, after the introduction of a mk_move/2 (or similar) callback, for the purpose of range splitting. Since the substitution needed to case over all the instructions, a new module, hipe_x86_subst, was introduced to the x86 backend. Due to differences in the 'jtab' field of a #jmp_switch{} between x86 and amd64, it regrettably needed to be duplicated to hipe_amd64_subst.
2016-09-02hipe: Add IG partitioning to hipe_regalloc_prepassMagnus Lång
2016-09-02hipe: Add hipe_regalloc_prepassMagnus Lång
hipe_regalloc_prepass speeds up register allocation by spilling any temp that is live over a call (which clobbers all register). In order to detect these, a new function was added to the target interface; defines_all_alloc/1, that takes an instruction and returns a boolean.
2016-08-30hipe: Fix o0 and o1Magnus Lång
These options would not do anything, because they would not supress the 'o2' in ?COMPILE_DEFAULTS. Such behaviour is added to expand_options/2.
2016-08-30hipe: Add o0 and o1 to testsMagnus Lång
Now that x86 is no longer broken with these optimisation levels, we add them to the test suite to ensure they do not break again. Bump timeout to 6min since tests are run twice as many times. The option set of o1 was changed to all optimisations that run fast on both big and small programs, incurring only a slight compile time increase compared to the old set, but with a, presumably, significant improvement to speed of compiled code. Change o0 register allocator to linear_scan.
2016-08-30hipe_x86: LSRA for SSE2Magnus Lång
There is little point offering LSRA for x86 if we're still going to call hipe_graph_coloring_regalloc for the floats. In particular, all allocators except LSRA allocates an N^2 interference matrix, making them unusable for really large functions.
2016-08-25Replace usage of deprecated time unitsRickard Green
2016-07-11hipe_sdi: Use segment trees to represent PARENTSMagnus Lång
This speeds up parentsOfChild/2 from O(n) to O(lg n + k). A new module misc/hipe_segment_trees.erl is introduced.
2016-05-31Cleanups in hipe/main and hipe/rtlKostis Sagonas
* Rewrite matching statements in ?when_option macro to form that silences dialyzer's unmatched_return warnings * Treat compiler warnings as errors when compiling files in main
2016-05-31Eliminate stupid if constructKostis Sagonas
2016-05-31Cosmetic cleanupsKostis Sagonas
2016-05-26Merge branch 'margnus1/llvm-compatibility/PR-1057/OTP-13626'Sverker Eriksson
2016-05-23Added elimination of maps:is_key/2 calls to HiPEMagnus Lång
* Implemented removal of maps:is_key/2 calls of which the result is known in a new pass during the typed phase, called hipe_icode_call_elim. * Added the option icode_call_elim that enables the hipe_icode_call_elim pass, and made it default for o2.
2016-05-11hipe_llvm: Disable floats for x86Magnus Lång
A bug in LLVM miscompiles x86 functions that have floats are spilled to stack. We work around it by disabling (inlined) floats when using llvm on x86. Once a LLVM version in which the bug is fixed is released, we can make the workaround conditional depending on the version.
2016-05-04hipe_llvm: Syntax compatibility with 3.7-3.8Magnus Lång
2016-03-15update copyright-yearHenrik Nord
2015-10-09Update and cleanup HiPE recordsKostis Sagonas
The bulk of the changes concerns cleanups and code refactorings concerning record constructions that assigned 'undefined' to record fields whose type did not contain this value. See commit 8ce35b2. While at it, some new type definitions were introduced and type names were used instead of record type notation. Minor code cleaups were also done.
2015-08-31erts,hipe,dialyzer: Fix hipe checkum of target runtime systemSverker Eriksson
Main problem: A faulty HIPE_LITERAL_CRC was not detected by the loader. Strangeness #1: Dialyzer should ask the hipe compiler about the target checksum, not an internal bif. Strangeness #2: The HIPE_SYSTEM_CRC checksum was based on the HIPE_LITERALS_CRC checksum. Solution: New HIPE_ERTS_CHECKSUM which is an bxor of the two (now independent) HIPE_LITERALS_CRC and HIPE_SYSTEM_CRC. HIPE_LITERALS_CRC represents values that are assumed to stay constant for different VM configurations of the same arch, and are therefor hard coded into the hipe compiler. HIPE_SYSTEM_CRC represents values that may differ between VM variants. By default the hipe compiler asks the running VM for this checksum, in order to create beam files for the same running VM. The hipe compiler can be configured (with "make XCOMP=yes ...") to create beam files for another VM variant, in which case HIPE_SYSTEM_CRC is also hard coded. ToDo: Treat all erts properties the same. Either ask the running VM or hard coded into hipe (if XCOMP=yes). This will simplify and reduce the risk of dangerous mismatches. One concern might be the added overhead from more frequent calls to hipe_bifs:get_rts_param.
2015-08-24erts: Change THE_NON_VALUE to not be hard coded in hipe compilerSverker Eriksson
Instead ask running VM for the value of THE_NON_VALUE, which is different between opt and debug VM. Same hipe compiler can now compile for both opt and debug VM.
2015-06-22Merge branch 'bruce/change-license'Bruce Yinhe
OTP-12845 * bruce/change-license: fix errors caused by changed line numbers Change license text to APLv2
2015-06-18Change license text to APLv2Bruce Yinhe
2015-06-13Simplify handling of o2 and o3 option expansionKostis Sagonas
A recent rewrite of some code in this file (commit 355f4b5) exposed some dialyzer warnings of some code which is unreachable. Indeed, checking whether one executes on an unsupported architecture when expanding the 'o2' and 'o3' hipe compiler options is unnecessary because that check is performed in the expansion of the 'o1' option anyway. While at it, simplified the code a bit not to have a very long case clause.
2015-06-04HiPE help shouldn't modify the calling processRichard Carlsson
2015-05-25Update runtime_dependencies in application resource filesHans Bolinder
Applications that use the new erl_anno module are depending on STDLIB 2.5. Note that CosNotification, Megaco, SNMP, Xmerl, and Parsetools use the erl_anno module via the Yecc parsers only (the header file in lib/parsetools/include/yeccpre.hrl calls the erl_anno module). HiPE does not call the erl_anno module, but uses an exported type. We have chosen to make HiPE dependent on the erl_anno module.
2015-03-20Replace usage of erlang:now() with usage of new APIRickard Green
2014-03-30Check for required LLVM version or issue errorYiannis Tsiouris
This checks that a required LLVM version (i.e. 3.4 or greater) appears in $PATH when 'to_llvm' flag is used; in case of failure, abort compilation with an error.
2014-03-21Merge branch 'yiannist/hipe-llvm-backend'Henrik Nord
* yiannist/hipe-llvm-backend: Support the LLVM backend in HiPE Implement the LLVM backend Extend RTL API to support the LLVM backend Add support for llvm unique symbols in hipe_gensym Add a BIF that only returns the atom ok Move some common code in hipe_pack_constants Add better specs in hipe_pack_constants and cleanup OTP-11801
2014-03-20Introduce runtime_dependencies in .app filesRickard Green
Most dependencies introduced are exactly the dependencies to other applications found by xref. That is, there might be real dependencies missing. There might also be pure debug dependencies listed that probably should be removed. Each application has to be manually inspected in order to ensure that all real dependencies are listed. All dependencies introduced are to application versions used in OTP 17.0. This since the previously used version scheme wasn't designed for this, and in order to minimize the work of introducing the dependencies.
2014-03-07Support the LLVM backend in HiPEYiannis Tsiouris
Add flags to enable and use the LLVM backend: * to_llvm: use the LLVM pipeline for compilation (default optimization level is O3), * llvm_save_temps: save the intermediate files in current directory in order to be able to debug or optimize the LLVM assembly, * {to_llvm, O}: set the optimization level of LLVM opt and llc tools. Add some debug support to the loader; no semantic change intented.
2014-02-24Make hipe non-upgradable by setting appup file emptyTobias Schlager
The reason for this is that if you are running a system with native compiled code, then you will have major problems with soft upgrade and the only reasonable way to go is to restart your emulator. Currently there is no instruction that will force ONLY a restart of the emulator, so the solution would be to hand write a relup with only a restart_emulator instruction. By letting hipe.appup be empty, systools will complain and not generate a relup - which should indicate that you might have to write your relup by hand.
2014-02-24Fix missing module on hipe app file templateTobias Schlager