aboutsummaryrefslogtreecommitdiffstats
path: root/lib/hipe/rtl
AgeCommit message (Collapse)Author
2017-04-21erts: Deprecate the non-smp emulatorsLukas Larsson
2017-03-06hipe_tagscheme: Small codegen improvementsMagnus Lång
2017-03-06hipe: Improve code generation for element/2Magnus Lång
* Omit bounds check in more cases. A test case that needs this change to omit bounds check is added. * Improve code generation by reformulating bounds check to decrease register pressure.
2017-03-02hipe_rtl_binary_construct: Refactor copy-pasteMagnus Lång
2017-03-02hipe_rtl: Inline more of match eq testMagnus Lång
With this change, both the matches and does not match cases have fastpaths that does not need to call primops.
2016-11-23Remove Emacs timestamp markersRichard Carlsson
2016-11-23Remove obsolete CVS keyword markupRichard Carlsson
2016-11-23Correct copyright on remaining hipe filesRichard Carlsson
2016-11-16hipe_tagscheme: Simplify test_two_fixnums with immMagnus Lång
test_two_fixnums would previously only check its right-hand argument for immediates, but not it's left. Now, test_two_fixnums reduces to test_fixnum if either argument is an immediate.
2016-11-16hipe_tagscheme: x86 lea+test for mask_and_compareMagnus Lång
By changing mask_and_compare from and,sub to sub,and, x86 can use a 3-address LEA immediate add, saving a mov. The RISC backends should see no change in sequence length. We make test_(heap_|sub)binary use mask_and_compare so they will benefit too.
2016-11-16hipe_tagscheme: Improve fixnum_addsub with immMagnus Lång
The addsub sequence was suboptimal when one of the arguments was immediate, because it became an immediate alu followed by an immediate alub, and the optimisers would not combine them due to the risk of altering the branch. However, in this case we know that such a rewrite is safe, and do it directly in hipe_tagscheme:fixnum_addsub/5 instead.
2016-11-16hipe: Make realloc_binary fast case true branchMagnus Lång
This makes the fast case a fallthrough and the slow case a branch, hopefully improving cache locality.
2016-11-16hipe_tagscheme: Improve fixnum add on x86Magnus Lång
With the introduction of immediate adds encoded as 'LEA' on x86, it is now possible to do a fixnum add in two instructions and one branch by commuting the addition and reusing the result register as a temporary, which makes the 'alub' a 2-address add, saving a move instruction.
2016-11-15hipe_rtl: drop alub dest when unusedMagnus Lång
2016-11-15hipe_rtl: unify branch and alubMagnus Lång
branch and alub overlap in their use cases, but the backends rely on knowing that the result is unused in their lowering of branch. By extending alub so that the destination is optional, it can fully replace branch. This simplifies rtl by reducing code duplication and the number of instructions. Also, in the x86 and arm backends, we can now use 'test' and {'tst','mvn','teq'} to lower some alubs without destinations. This is particularly good for x86, as sequences such as 'is_boxed' type tests now get shorter (both from not needing a mov to copy the variable, but also from the fact that 'testb' encodes shorter than 'andq').
2016-11-07Merge branch 'maint'Sverker Eriksson
2016-11-03Fix the native code translation of bs_match_stringKostis Sagonas
This fixes a HiPE bug reported on erlang-questions on 2/11/2016. The BEAM to ICode tranaslation of the bs_match_string instruction, written long ago for binaries (i.e., with byte-sized strings), tried to do a `clever' translation of even bit-sized strings using a HiPE primop that took a `Size' argument expressed in *bytes*. ICode is not really the place to do such a thing, and moreover there is really no reason for the HiPE primop not to take a Size argument expressed in *bits* instead. This commit changes the `Size' argument to be in bits, postpones the translation of the bs_match_string primop Fixed in a pair-programming/debugging session with @margnus1. until RTL and does a proper translation using bit-sized quantities there.
2016-10-14hipe,erts: Remove cached fun 'native_address'Sverker Eriksson
Did not work with purge and made worse by new purge strategy. Did yield terrible performance when fun thing is created *before* fun code is loaded. Like when receiving not yet loaded fun from other node. The cached 'native_address' in ErlFunThing will not be updated leading to mode switch and error_handler being called for every call to the fun from native code.
2016-09-02hipe: Remove temp reuse from call_funMagnus Lång
2016-08-30hipe_rtl_binary:get_word_integer/4: Handle immsMagnus Lång
Immediate arguments to get_word_integer/4 would lead to bad but unreachable RTL being generated. We omit its generation by testing for immediates and performing the logic at compile time.
2016-05-31Code rewrites to avoid exported vars compiler warningsKostis Sagonas
2016-05-31Cleanups in hipe/main and hipe/rtlKostis Sagonas
* Rewrite matching statements in ?when_option macro to form that silences dialyzer's unmatched_return warnings * Treat compiler warnings as errors when compiling files in main
2016-05-31Various cleanups and simplificationsKostis Sagonas
2016-05-31Cosmetic cleanupsKostis Sagonas
2016-03-15update copyright-yearHenrik Nord
2016-02-02Merge branch 'margnus1/bs_unit_fix' into maintZandra
* margnus1/bs_unit_fix: hipe: Fix signed compares of unsigned sizes beam: Fix overflow bug in i_bs_add_jId hipe: Add tests for bad bit syntax float sizes Add a case testing the handling of guards involving binaries Add some more binary syntax construction tests hipe: Guard against enormous numbers in ranges hipe: Fix constructing huge binaries hipe: Fix binary constructions failing with badarith Add missing corner-case to bs_construct_SUITE hipe: Allow unsigned args in hipe_rtl_arith hipe: test unit size match in bs_put_binary_all hipe: test unit size match in bs_append Fix hipe_rtl_binary_construct:floorlog2/1 OTP-13272
2015-12-16Fix compilation of matching with UTF binariesKostis Sagonas
The code generated by the HiPE compiler for pattern matching with UTF binaries was such that sometimes THE_NON_VALUE was stored in the roots followed by the garbage collector. This was not an issue for the vanilla native code compiler, but was problematic for the ErLLVM back-end. Fix the issue by not storing THE_NON_VALUE in the live roots. An alternative fix would be to change the code of the garbage collector. With this fix, there are no more (known) failing test cases for the ErLLVM back-end (at least on x86_64 with LLVM 3.5, which is the configuation regularly tested). Thanks to @margnus1 for the fix.
2015-12-02hipe: Fix signed compares of unsigned sizesMagnus Lång
Also, some of the branches were testing sizes in bits against a constant ?MAX_BINSIZE, which was in bytes. The signed comparisons masked this mistake. These branches have been removed since all sizes in bits that fit in a machine word are valid binary sizes. Finally, a test that reproduces the issue was added to bs_construct, along with a test for one of the cases (bs_init<0>(...)) when the test against ?MAX_BINSIZE must be changed to unsigned rather than removed.
2015-11-27hipe: Fix constructing huge binariesMagnus Lång
Bugs were fixed in hipe_rtl_binary_match:{first_part/3,make_size/3,set_high/1} in commit 5aea81c49, but it turns out these had been copy-pasted verbatim into hipe_rtl_binary_construct, where they were causing further bugs. They have now moved to hipe_rtl_binary, from where they are included by the other two modules. Furthermore, first_part/3 (reamed get_word_integer/3, since it loads integers that fits into an unsigned word), and make_size/3 now accepts a fourth argument to distinguish too large arguments (which should cause a system_limit exception) from negative or non-integral arguments. The use of first_part/3 (get_word_integer/3) from 5aea81c49 in hipe_rtl_binary_construct now allows several binary construction instructions to accept bignum sizes, as they were supposed to. Additionally, calls to hipe_rtl_binary_construct:check_and_untag_fixnum/3 were replaced with get_word_integer/4 since all of them were also supposed to accept sufficiently small bignums, but didn't, and check_and_untag_fixnum/3 was essentially identical to first_part/3 anyway. HiPE is now capable of passing bs_construct_SUITE completely unmodified.
2015-11-27hipe: Allow unsigned args in hipe_rtl_arithMagnus Lång
hipe_rtl_arith is only used by hipe_rtl_ssa_const_prop, which applies it to any RTL, including RTL where the intent is to do unsigned math. Since signed and unsigned operations produce the same 2's complement result, this change is harmless. On 32-bit architectures it caused HiPE crashes when compiling code like <<0:((1 bsl 32)-1)>>, because the size of the field is too large to fit in a signed integer.
2015-11-27hipe: test unit size match in bs_put_binary_allMagnus Lång
The unit size field was previously completely discarded when lowering this instruction from BEAM to Icode. This feature was previously missing and expressions such as <<0, <<1:1>>/binary>> would succeed construction when compiled with HiPE.
2015-11-27hipe: test unit size match in bs_appendMagnus Lång
This feature was previously missing and expressions such as <<<<1:1>>/binary>> would succeed construction when compiled with HiPE. A primop is_divisible is introduced to handle the case when the unit size is not a power of two.
2015-11-27Fix hipe_rtl_binary_construct:floorlog2/1Magnus Lång
Relying on double-precision floating-point arithmetic to compute the log2 of an integer up to 64 bits long leads to rounding errors.
2015-11-09Merge branch 'kostis/hipe-bs-match-huge-bin' into maintHenrik Nord
* kostis/hipe-bs-match-huge-bin: Fix matching with huge binaries Compile without errors for exported variables OTP-13092
2015-10-12Fix edge case of Size = 0 in bs_put_integerKostis Sagonas
copy_offset_int_big was assuming (Offset + Size - 1) (Tmp9 in the first BB) would not underflow. It was also unconditionally reading and writing the binary even when Size was zero, unlike copy_int_little, which is the only other case of bs_put_integer that does not have a short-circuit on Size = 0. This was causing segfaults when constructing binaries starting with a zero-length integer field, because a logical right shift was used to compute an offset in bytes (which became 0x1fffffffffffffff) to read in the binary. Tests, taken from the emulator bs_construct_SUITE, were also added. The complete credit for the report and the fix goes to Magnus Lång.
2015-10-02Fix matching with huge binariesKostis Sagonas
In certain cases of matching with very big binaries, the HiPE compiler generated code that would fail the match, even in cases that the matching was successful. The problem was more quite noticeable on 32-bit platforms where certain integer quantities would be represented as bignums. Brief summary of changes: * gen_rtl({bs_skip_bits, ...}, ...) could not handle too large constants. Previously the constants were truncated to word size. * hipe_rtl_binary_match:make_size/3 erroneously assumed that the output of first_part/3 would not overflow when multiplied by 8, which is no longer true. To maintain full performance, the overflow test is only performed when BitsVar was a bignum. Thus, the fast path is identical to before. * hipe_rtl_binary_match:set_high/2 was assuming that only bits below bit 27 were ever set in arguments to bs_skip_bits, which is not only false when the arguments are bignums, but also on 64-bit platforms. The commit includes a test taken from the bs_match_bin_SUITE. Most of the credit for finding these HiPE compiler errors and for creating appropriate fixes for them should go to Magnus Lång.
2015-10-02Compile without errors for exported variablesKostis Sagonas
2015-06-22Merge branch 'bruce/change-license'Bruce Yinhe
OTP-12845 * bruce/change-license: fix errors caused by changed line numbers Change license text to APLv2
2015-06-18Change license text to APLv2Bruce Yinhe
2015-06-13Eliminate a dialyzer warningKostis Sagonas
For quite some time now, this module generated a (quite harmless) dialyzer warning. Comment out a clause which was actually unreachable. While at it, do some small code refactorings here and there.
2015-04-21erts,hipe: Optimize away calls to emasculate_binarySverker Eriksson
Only call emasculate_binary if ProcBin.flags is set, which means it's a writable binary.
2015-04-20erts,hipe: Fix bug in binary matching of writable binarySverker Eriksson
Seen symptom: Hipe compiled code with <<C/utf8, ...>> = Bin does sometimes not match even though Bin contains a valid utf8 character. There might be other possible binary matching symptoms, as the problem is not utf8 specific. Problem: A writable binary was not "emasculated" when the matching started (as it should) by the hipe compiled code. Fix: Add a new primop emasculate_binary(Bin) that is called when a matchstate is created. ToDo: There are probably room for optimization. For example only call emasculate_binary if ProcBin.flags is set.
2015-01-11hipe: rtl: fix phi_remove_pred/2 FP movesMikael Pettersson
hipe_rtl:phi_remove_pred/2 can produce a #move{} instruction with floating-point temporaries as operands, even though such moves MUST be #fmove{} instructions. Added type checks to the #move{} and #fmove{} constructor and setter functions to ensure that similar mishaps cannot happen again.
2014-12-02Replaced "Endianess" with "Endianness" everywhereDavid Haguenauer
2014-03-28Add support for the compilation of the is_map/1 guard to native codeKostis Sagonas
Namely, extend the HiPE tagging scheme info, properly handle the translation of the (is_)map type test to Icode and RTL and support handling of the map() type in the type system. While at it, also performed some clean up of things that needed small fixes.
2014-03-25Merge branch 'ks/hipe-rtl-remove-constant/OTP-11822'Björn-Egil Dahlberg
* ks/hipe-rtl-remove-constant/OTP-11822: Remove RTL code that handled the (is_)constant guard
2014-03-19Remove RTL code that handled the (is_)constant guardKostis Sagonas
The (is_)constant/1 guard is removed from Erlang long ago and thus there is no need to handle it in RTL. While editing these files, also performed some minor cleanup.
2014-03-07Extend RTL API to support the LLVM backendYiannis Tsiouris
Extend the 'rtl_var' definition to host liveness information needed for a simple liveness analysis performed by the LLVM backend. Also, uncomment some function definitions (mostly simple accessors) that are already there and are useful for the translation of RTL code to LLVM assembly. Finally, extend the RTL 'call' instruction with the 'normalcontinuation' field which is required for translating calls that are in the scope of an exception handler. This extra field is required in order to point to a new basic block which will hold the 'unwind label' of LLVM's invoke instruction. While the 'unwind label' is semantically equivalent with the 'failcontinuation', in LLVM this block must have a 'landingpad' instruction. The problem arises by the fact that an RTL 'continuation' block can also be accessible by other paths in the RTL CFG, and so cannot be marked as a landing pad. To overcome this issue we create a new block (the 'normalcontinuation') which is used as the 'unwind label' of LLVM's invoke instruction and which will eventually transfer control to the 'continuation' block.
2013-06-12Merge branch 'maint'Björn-Egil Dahlberg
2013-06-12Update copyright yearsBjörn-Egil Dahlberg