aboutsummaryrefslogtreecommitdiffstats
path: root/lib/hipe/sparc
AgeCommit message (Collapse)Author
2016-11-23Correct copyright on remaining hipe filesRichard Carlsson
2016-11-15hipe_sparc: move coalescingMagnus Lång
2016-11-15hipe_rtl: unify branch and alubMagnus Lång
branch and alub overlap in their use cases, but the backends rely on knowing that the result is unused in their lowering of branch. By extending alub so that the destination is optional, it can fully replace branch. This simplifies rtl by reducing code duplication and the number of instructions. Also, in the x86 and arm backends, we can now use 'test' and {'tst','mvn','teq'} to lower some alubs without destinations. This is particularly good for x86, as sequences such as 'is_boxed' type tests now get shorter (both from not needing a mov to copy the variable, but also from the fact that 'testb' encodes shorter than 'andq').
2016-09-05hipe: Refactor ra callbacks to accept context argMagnus Lång
This allows us to pass around the context data that hipe_regalloc_prepass needs cleanly, without using process dictionary or parameterised modules (like it was previous to this change).
2016-09-05hipe: Reuse liveness between regalloc iterationsMagnus Lång
This is sound because the liveness data structure only stores liveness info at basic block boundaries, and the rewrites that happen in TargetSpecific:check_and_rewrite/2 preserves all existing definitions and uses, and all new liveness intervals, belonging to newly introduced temporaries, are always local to a basic block, and thus do not show up in the liveout or livein sets for the basic block.
2016-09-02hipe_sparc: Add code rewrite RA callbacksMagnus Lång
These will not only be useful for hipe_regalloc_prepass, but also, after the introduction of a mk_move/2 (or similar) callback, for the purpose of range splitting. Since the substitution needed to case over all the instructions, a new module, hipe_sparc_subst, was introduced to the sparc backend.
2016-09-02hipe: Add hipe_regalloc_prepassMagnus Lång
hipe_regalloc_prepass speeds up register allocation by spilling any temp that is live over a call (which clobbers all register). In order to detect these, a new function was added to the target interface; defines_all_alloc/1, that takes an instruction and returns a boolean.
2016-09-02Merge branch 'sverker/hipe-performance-o1/PR-1154/OTP-13862'Sverker Eriksson
* sverker/hipe-performance-o1/PR-1154: hipe_sparc: Minimise CFG<->linear conversions hipe_ppc: Minimise CFG<->linear conversions hipe_arm: Minimise CFG<->linear conversions hipe_x86: Use lea instead of move+add hipe_arm: Improve peephole optimiser hipe_arm: Be resilient to crappy RTL hipe_ppc: Be resilient to crappy RTL hipe_sparc: Be resilient to crappy RTL hipe: Reuse liveness info for spillmin hipe_x86: Minimise CFG<->linear conversions hipe: Fix o0 and o1 hipe: Add o0 and o1 to tests hipe_rtl_binary:get_word_integer/4: Handle imms hipe_x86: Be resilient to crappy RTL hipe_x86: LSRA for SSE2
2016-09-02Merge branch 'sverker/hipe-sparc-19/PR-1148/OTP-13861' into maintSverker Eriksson
* sverker/hipe-sparc-19/PR-1148: Eliminate catch-all clause from two functions Increase the time limit used by the test suite
2016-08-30hipe_sparc: Minimise CFG<->linear conversionsMagnus Lång
Now, there will only ever be a single Linear->CFG conversion, just after lowering from RTL, and only ever a single CFG->Linear conversion, just before the finalise pass. Both of these now happen in hipe_sparc_main.
2016-08-30hipe_sparc: Be resilient to crappy RTLMagnus Lång
The SPARC backend crashes if certain RTL optimisations were omitted, preventing it from being usable at lower optimisation levels.
2016-08-30hipe: Reuse liveness info for spillminMagnus Lång
For x86, additionally reuse liveness from float LSRA for the GP LSRA.
2016-08-26Eliminate catch-all clause from two functionsKostis Sagonas
A stronger version of Dialyzer complained that some case clauses in functions xaluop_is_shift/1 and xaluop_normalise/1 are unreachable. These clauses are now commented out. While at it, I thought that it would be better to eliminate the catch-all clauses in order to be certain we properly handle all RTL instructions that are used as inputs to these functions. Note: The code will now crash if there are unhandled cases.
2016-08-22hipe: Fix tailcall stackarg clobber bugMagnus Lång
Since the link register/return address is restored before stack arguments are stored to the frame, we must not use it to store a stack argument. We do that by adding it to the registers clobbered by pseudo_tailcall_prepare.
2016-05-31Add compiler option -Werror to MakefilesKostis Sagonas
and correct the name of another, erroneously spelt, option in the process.
2016-03-15update copyright-yearHenrik Nord
2015-08-31erts,hipe,dialyzer: Fix hipe checkum of target runtime systemSverker Eriksson
Main problem: A faulty HIPE_LITERAL_CRC was not detected by the loader. Strangeness #1: Dialyzer should ask the hipe compiler about the target checksum, not an internal bif. Strangeness #2: The HIPE_SYSTEM_CRC checksum was based on the HIPE_LITERALS_CRC checksum. Solution: New HIPE_ERTS_CHECKSUM which is an bxor of the two (now independent) HIPE_LITERALS_CRC and HIPE_SYSTEM_CRC. HIPE_LITERALS_CRC represents values that are assumed to stay constant for different VM configurations of the same arch, and are therefor hard coded into the hipe compiler. HIPE_SYSTEM_CRC represents values that may differ between VM variants. By default the hipe compiler asks the running VM for this checksum, in order to create beam files for the same running VM. The hipe compiler can be configured (with "make XCOMP=yes ...") to create beam files for another VM variant, in which case HIPE_SYSTEM_CRC is also hard coded. ToDo: Treat all erts properties the same. Either ask the running VM or hard coded into hipe (if XCOMP=yes). This will simplify and reduce the risk of dangerous mismatches. One concern might be the added overhead from more frequent calls to hipe_bifs:get_rts_param.
2015-06-18Change license text to APLv2Bruce Yinhe
2015-01-11hipe: backends: correct #fconv{} translationMikael Pettersson
RTL can produce an #fconv{} instruction with an immediate operand, but the backends unconditionally access the operand as a temporary. This results in broken representation in the backends and eventually they crash.
2014-03-07Move some common code in hipe_pack_constantsYiannis Tsiouris
All backends (e.g. arm, ppc, sparc, x86) share the same code for the following functions: * find_const/2, * mk_data_relocs/2, and * slim_sorted_exportmap/3 This commit moves those definitions (along with some helper functions) in misc/hipe_pack_constants.erl and adds the appropriate specs. This is a structural change; no change in semantics intented.
2012-08-31Update copyright yearsBjörn-Egil Dahlberg
2012-08-24Comment out unused cases and some csmetic cleanups.Kostis Sagonas
2012-06-05Update to work with whitespace in exec pathLukas Larsson
OTP-10106 OTP-10107
2012-03-30Update copyright yearsBjörn-Egil Dahlberg
2012-02-28Make hipe hipe-compiled w/ --enable-native-libsPatrik Nyblom
2010-01-26OTP-8343 The documentation is now possible to build in an open sourceLars G Thorsen
environment after a number of bugs are fixed and some features are added in the documentation build process. - The arity calculation is updated. - The module prefix used in the function names for bif's are removed in the generated links so the links will look like http://www.erlang.org/doc/man/erlang.html#append_element-2 instead of http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2 - Enhanced the menu positioning in the html documentation when a new page is loaded. - A number of corrections in the generation of man pages (thanks to Sergei Golovan) - Moved some man pages to more apropriate sections, pages in section 4 moved to 5 and pages in 6 moved to 7. - The legal notice is taken from the xml book file so OTP's build process can be used for non OTP applications.
2009-11-20The R13B03 release.OTP_R13B03Erlang/OTP