aboutsummaryrefslogtreecommitdiffstats
path: root/lib/hipe
AgeCommit message (Collapse)Author
2017-04-21erts: Deprecate the non-smp emulatorsLukas Larsson
2017-03-30Fix ErLLVM in --enable-m32-build buildsMagnus Lång
By having ErLLVM explicitly tell LLVM which architecture we're expecting it to compile for we remove the risk of having LLVM generate amd64 code for a x86 VM.
2017-03-28Merge PR-1392 from margnus1/hipe-range-fixpoint-bug OTP-14306Sverker Eriksson
HiPE: Fix ERL-278: Fix range analysis miscompilation bug
2017-03-28hipe_icode_range: Add comment about side-effectsMagnus Lång
2017-03-27Merge PR-1386 from kostis/hipe-const-alignment OTP-14302Sverker Eriksson
hipe: Fix alignment of byte-sized constants
2017-03-27Merge pull request #1387 from margnus1/hipe-spilllimit-fixSverker Eriksson
HiPE: Fix off-by-one bug in register allocators Fix for PR-1380
2017-03-27hipe: Fix range analysis of calls with ignored resMagnus Lång
HiPE's range analysis would not update the arguments of a callee when the result of the call was ignored. Fixes ERL-278.
2017-03-27hipe: Fix range analysis of 'rem' operatorMagnus Lång
erl_bif_types contains a fixed and improved copy-paste (obvious from the dead Max_range2_leq_zero if branches) of hipe_icode_range:range_rem/2. For now, delete the dead code and propagate back fixes and improvements to hipe_icode_range.
2017-03-24hipe: Transform is_tagged_tuple instructionBjörn-Egil Dahlberg
2017-03-23HiPE: Fix off-by-one in register allocatorsMagnus Lång
hipe_regalloc_loop considers SpillLimit to be an inclusive lower bound, the allocators considered it to be an exclusive lower bound. The allocators are changed to also consider it an inclusive lower bound. This caused the register allocators to occasionally spill the first "unspillable" temporary. This caused a failure in a newly added assertion when hipe-compiling dets_v9 on x86.
2017-03-23Remove ctab_array since apparently is not usedKostis Sagonas
2017-03-23Remove (now) unnecessary argument of pack_constantsKostis Sagonas
2017-03-21Fix alignment of byte-sized constantsKostis Sagonas
2017-03-16hipe_spillmin_color: cleanup exit callsMagnus Lång
2017-03-16hipe_spillmin_color: Move coalescingMagnus Lång
2017-03-16hipe: Add pseudo_spill_f?move instructionsMagnus Lång
These pseudo instructions are added to all backends and allow spill slot to spill slot move coalescing in a clean way. They have regular move semantics, but contain an additional scratch register to be used if both source and destination are spilled, and can not be move coalesced. Additionally, a register allocator callback Target:is_spill_move(Instr, Context) is added which allows the spill slot allocators to check for these instructions and try to coalesce the spill slots the two temporaries are allocated to.
2017-03-16hipe: Add range splitter range_splitMagnus Lång
hipe_range_split is a complex live range splitter, more sophisticated thatn hipe_restore_reuse, but still targeted specifically at temporaries forced onto stack by being live over call instructions. hipe_range_split partitions the control flow graph at call instructions, like hipe_regalloc_prepass. Splitting decisions are made on a per partition and per temporary basis. There are three different ways in which hipe_range_split may choose to split a temporary in a program partition: * Mode1: Spill the temp before calls, and restore it after them * Mode2: Spill the temp after definitions, restore it after calls * Mode3: Spill the temp after definitions, restore it before uses To pick which of these should be used for each temp×partiton pair, hipe_range_split uses a cost function. The cost is simply the sum of the cost of all expected stack accesses, and the cost for an individual stack access is based on the probability weight of the basic block that it resides in. This biases the range splitter so that it attempts moving stack accesses from a functions hot path to the cold path. hipe_bb_weights is used to compute the probability weights. mode3 is effectively the same as what hipe_restore_reuse does. Because of this, hipe_restore_reuse reuses the analysis pass of hipe_restore_reuse in order to compute the minimal needed set of spills and restores. The reason mode3 was introduced to hipe_range_split rather than simply composing it with hipe_restore_reuse (by running both) is that such a composition resulted in poor register allocation results due to insufficiently strong move coalescing in the register allocator. The cost function heuristic has a couple of tuning knobs: * {range_split_min_gain, Gain} (default: 1.1, range: [0.0, inf)) The minimum proportional improvement that the cost of all stack accesses to a temp must display in order for that temp to be split. * {range_split_mode1_fudge, Factor} (default: 1.1, range: [0.0, inf)) Costs for mode1 are multiplied by this factor in order to discourage it when it provides marginal benefits. The justification is that mode1 causes temps to be live for longest, thus leading to higher register pressure. * {range_split_weight_power, Factor} (default: 2, range: (0.0, inf)) Adjusts how much effect the basic block weights have on the cost of a stack access. A stack access in a block with weight 1.0 has cost 1.0, a stack access in a block with weight 0.01 has cost 1/Factor. Additionally, the option range_split_weights chooses whether the basic block weights are used at all. In the case that the input is very big, hipe_range_split automatically falls back to hipe_restore_reuse only in order to keep compile times under control. Note that this is not only because of hipe_range_split being slow, but also due to the resulting program being slow to register allocate, and is not as partitionable by hipe_regalloc_prepass. hipe_restore_reuse, on the other hand, does not affect the programs partitionability. The hipe_range_split pass is controlled by a new option ra_range_split. ra_range_split is added to o2, and ra_restore_reuse is disabled in o2.
2017-03-16hipe: Add module computing basic blocks weightsMagnus Lång
hipe_bb_weights computes basic block weights by using the branch probability predictions as the coefficients in a linear equation system. This linear equation system is then solved using Gauss-Jordan Elimination. The equation system representation is picked to be efficient with highly sparse data. During triangelisation, the remaining equations are dynamically reordered in order to prevent the equations from growing in the common case, preserving the benefit of the sparse equation representation. In the case that the input is very big, hipe_bb_weights automatically falls back to a rough approximation in order to keep compile times under control.
2017-03-16hipe: Add branch prediction accessor ra callbacksMagnus Lång
Adds a new register allocator callback Target:branch_preds(Instr, Context) which, for a control flow instruction Instr, returns a list of tuples {Target, Probability} for each label name Target that Instr may branch to. Probability is a float between 0.0 and 1.0 and corresponds to the predicted probability that control flow branches to the corresponding target. The probabilities may sum to at most 1.0 (rounding errors aside). Note that a sum less than 1.0 is valid.
2017-03-16hipe: Add range splitter restore_reuseMagnus Lång
hipe_restore_reuse is a simplistic range splitter that splits temps that are forced onto the stack by being live over call instructions. In particular, it attempts to avoid cases where there are several accesses to such stack allocated temps in straight-line code, uninterrupted by any calls. In order to achieve this it splits temps between just before the first access(es) and just after the last access(es) in such straight-line code groups. The hipe_restore_reuse pass is controlled by a new option ra_restore_reuse. ra_restore_reuse is added to o1.
2017-03-16hipe: Add basic range splitting ra callbacksMagnus Lång
In addition to the temporary name rewriting that hipe_regalloc_prepass does, range splitters also need to be able to insert move instructions, as well as inserting new basic blocks in the control flow graph. The following four callbacks are added for that purpose: * Target:mk_move(Src, Dst, Context) Returns a move instruction from the temporary (not just register number) Src to Dst. * Target:mk_goto(Label, Context) Returns a unconditional control flow instruction that branches to the label with name Label. * Target:redirect_jmp(Instr, ToOld, ToNew, Context) Modifies the control flow instruction Instr so that any control flow that would go to a label with name ToOld instead goes to the label with name ToNew. * Target:new_label(Context) Returns a fresh label name that does not belong to any existing block in the current function, and is to be used to create a new basic block in the control flow graph by calling Target:update_bb/4 with this new name.
2017-03-16hipe: Add basic_edge_cases test caseMagnus Lång
Two tests are added, primarily aimed at the range splitters. * test_float_spills, which exercises the rare case of high floating point register pressure, including spill slot move coalescing. * test_infinite_loops, which tests that various infinite loops are properly compiled and do contain reduction tests (otherwise they would permanently hog their scheduler and not notice being sent an exit signal).
2017-03-16hipe: Extract disjoint sets to its own moduleMagnus Lång
2017-03-16hipe_x86_subst: Fix bug with zero-arity #fp_unop{}Magnus Lång
2017-03-14Merge branch 'maint'Rickard Green
* maint: Updated OTP version Prepare release Conflicts: OTP_VERSION lib/typer/doc/src/notes.xml lib/typer/vsn.mk
2017-03-14Prepare releaseErlang/OTP
2017-03-14Merge branch 'hasse/hipe/remove_work_around'Hans Bolinder
* hasse/hipe/remove_work_around: hipe: Remove work around for Dialyzer bug
2017-03-13Merge branch 'maint'Rickard Green
* maint: Fix xml warnings in old release notes
2017-03-13Fix xml warnings in old release notesRickard Green
2017-03-13hipe: Remove work around for Dialyzer bugHans Bolinder
The bug in Dialyzer is fixed in commit 5ac2943.
2017-03-09Merge PR-1360 from margnus1/hipe-codegen/OTP-14261Sverker Eriksson
HiPE: Various small code cleanups and codegen improvements
2017-03-06hipe_amd64: Add missing makefile dependencyMagnus Lång
2017-03-06hipe_x86_assemble: 32-bit forms for movzx and xor-selfMagnus Lång
2017-03-06hipe_x86_postpass: Enable ElimSet0 ruleMagnus Lång
2017-03-06hipe_tagscheme: Small codegen improvementsMagnus Lång
2017-03-06hipe_x86: CleanupMagnus Lång
2017-03-06hipe_rtl_to_llvm: CleanupMagnus Lång
2017-03-06hipe: Improve code generation for element/2Magnus Lång
* Omit bounds check in more cases. A test case that needs this change to omit bounds check is added. * Improve code generation by reformulating bounds check to decrease register pressure.
2017-03-06hipe/ebb.inc: Cleanup recursive type workaroundMagnus Lång
2017-03-06hipe_amd64_encode: Add test for 16-bit 'test' with REXMagnus Lång
2017-03-06hipe_amd64_registers: Cleanup exit/1 callsMagnus Lång
2017-03-06hipe_beam_to_icode: Omit redtest in some closuresMagnus Lång
This is useful to generate shorter code for closures generated by (fun F/A).
2017-03-06Merge branch 'maint'Hans Bolinder
* maint: dialyzer: Improve a warning dialyzer: Fix a weird warning dialyzer: Fix an opaque bug dialyzer: Minor fix Conflicts: lib/dialyzer/src/dialyzer_dataflow.erl
2017-03-02hipe_rtl_binary_construct: Refactor copy-pasteMagnus Lång
2017-03-02hipe_rtl: Inline more of match eq testMagnus Lång
With this change, both the matches and does not match cases have fastpaths that does not need to call primops.
2017-02-28dialyzer: Improve a warningHans Bolinder
When a pattern a type do not match, opaque warnings were given precedence before structure mismatches. This is no longer always the case. Mentioned by Nick Marino on erlang-questions.
2017-02-28dialyzer: Fix a weird warningHans Bolinder
2017-02-19ErLLVM: Drop code printing assembly for LLVM < 3.9Magnus Lång
2017-02-19ErLLVM: Demand LLVM 3.9 or greaterMagnus Lång
2017-02-14Fixed typos in lib/hipeAndrew Dryga