| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Also fix a typo.
|
|
|
|
kernel: inet - fix invalid IPv4-mapped-address examples
|
|
|
|
* IPv6 address FFFF::192.168.42.2 is an invalid form as an IPv4-mapped address.
This should be fixed as ::FFFF:192.168.42.2.
The assigned address block is ::ffff:0:0/96.
See RFC6890 Table 20 in the Section 2.2.2 for the further details.
And for this IPv4-mapped address use *only*,
the 32bit LSB of the IPv6 address can be written
with the respective IPv4 address.
See RFC4291 Section 2.2 Form 3 for the further details.
|
|
bind to device is needed to properly support VRF-Lite under
Linux (see [1] for details).
[1]: https://www.kernel.org/doc/Documentation/networking/vrf.txt
|
|
* lukas/kernel/gen_tcp_close_docs:
kernel: Expand gen_tcp:close docs with send text
|
|
This commit attempts to clarify some of the guarantees given by
the TCP standard when issuing close. This is quite a complex
topic so there are probably corner cases still left, but this
at least tells the user that things can go wrong when doing
a close.
|
|
The documentation does not indicate this is the buffer responsible for the maximum bytes we can receive from a recv call.
|
|
|
|
|
|
Fix some older errors as well.
|
|
|
|
|
|
This makes the implementation text of inet:gethostbyname/1 identical to
that of inet_res:gethostbyname/1. I also copied over the doc note about
this resolver option.
|
|
|
|
Language cleaned up by technical writers from Combitech.
Proofreading and corrections by Björn Gustavsson and
Hans Bolinder.
|
|
Fix mistakes found by 'xmllint'.
|
|
A new {line_delimiter, byte()} option allows line-oriented TCP-based
protocols to use a custom line delimiting character. It is to be
used in conjunction with {packet, line}.
This option also works with erlang:decode_packet/3 when its first argument
is 'line'.
|
|
|
|
Up till now all send errors have been translated into a generic
{error, closed}. This patch allows {error, econnreset} to be
returned on send errors when it is detected that the TCP peer
has sent an RST.
|
|
An ECONNRESET is a socket error which tells us that a TCP peer has sent
an RST. The RST indicates that they have aborted the connection and
that the payload we have received should not be considered complete. Up
until now, the implementation of TCP in inet_drv.c has hidden the
receipt of the RST from the user, treating it as though it was just
a FIN terminating the read side of the socket.
There are many cases where user code needs to be able to distinguish
between a socket that was closed normally and one that was aborted.
Setting the option {show_econnreset, true} enables the user to receive
ECONNRESET errors on both active and passive sockets.
A connected socket returned from gen_tcp:accept/1 will inherit the
show_econnreset setting of the listening socket.
By default this option is set to {show_econnreset, false}.
Note that this patch only enables the reporting of ECONNRESET when
the socket is being read from. It does not report ECONNRESET (or
EPIPE) when the user tries to write to a connection when an RST
has already been received. Currently the TCP implementation in
inet_drv.c hides all such send errors from the user in favour
of returning {error, close}. A separate patch will be needed to
enable the reporting of such errors.
|
|
|
|
|
|
The word 'received' in 'send_dvi' option description seems to be
copy-pasted and not removed
|
|
Conflicts:
erts/preloaded/ebin/prim_inet.beam
lib/kernel/test/gen_sctp_SUITE.erl
|
|
|
|
|
|
Add the {active,N} socket option, where N is an integer in the range
-32768..32767, to allow a caller to specify the number of data messages to
be delivered to the controlling process. Once the socket's delivered
message count either reaches 0 or is explicitly set to 0 with
inet:setopts/2 or by including {active,0} as an option when the socket is
created, the socket transitions to passive ({active, false}) mode and the
socket's controlling process receives a message to inform it of the
transition. TCP sockets receive {tcp_passive,Socket}, UDP sockets receive
{udp_passive,Socket} and SCTP sockets receive {sctp_passive,Socket}.
The socket's delivered message counter defaults to 0, but it can be set
using {active,N} via any gen_tcp, gen_udp, or gen_sctp function that takes
socket options as arguments, or via inet:setopts/2. New N values are added
to the socket's current counter value, and negative numbers can be used to
reduce the counter value. Specifying a number that would cause the socket's
counter value to go above 32767 causes an einval error. If a negative
number is specified such that the counter value would become negative, the
socket's counter value is set to 0 and the socket transitions to passive
mode. If the counter value is already 0 and inet:setopts(Socket,
[{active,0}]) is specified, the counter value remains at 0 but the
appropriate passive mode transition message is generated for the socket.
This commit contains a modified preloaded prim_inet.beam due to changes in
prim_inet.erl.
Add tests for {active,N} mode for TCP, UDP, and SCTP sockets.
Add documentation for {active,N} mode for inet, gen_tcp, gen_udp, and
gen_sctp.
|
|
Conflicts:
erts/preloaded/ebin/prim_inet.beam
|
|
* raimo/linux-network-namespace-sockopt/OTP-11157:
Document socket option 'netns'
Rudimentary test
Make netns option value a string
Implement netns for SCTP + bugfixes
Implement netns option for TCP and UDP
Implement emulator netns support for TCP and UDP
|
|
|
|
|
|
|
|
|
|
* maint:
Only verify not busy for erlang:send(Port, Msg, [nosuspend]) until scheduled
Make high_msgq_watermark and low_msgq_watermark generic inet options
Do not treat port_set_data/port_get_data as signals
Add 'frmptr' emulator type
Conflicts:
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/prim_inet.beam
|
|
|
|
|
|
|
|
Examples overflowing the width of PDF pages have been fixed.
The remaining warnings are due to table cells, and require more
work.
|
|
rickard/r16/port-optimizations/OTP-10336
* rickard/port-optimizations/OTP-10336:
Change annotate level for emacs-22 in cerl
Update etp-commands
Add documentation on communication in Erlang
Add support for busy port message queue
Add driver callback epilogue
Implement true asynchronous signaling between processes and ports
Add erl_drv_[send|output]_term
Move busy port flag
Use rwlock for driver list
Optimize management of port tasks
Improve configuration of process and port tables
Remove R9 compatibility features
Use ptab functionality also for ports
Prepare for use of ptab functionality also for ports
Atomic port state
Generalize process table implementation
Implement functionality for delaying thread progress from unmanaged threads
Conflicts:
erts/doc/src/erl_driver.xml
erts/doc/src/erlang.xml
erts/emulator/beam/beam_bif_load.c
erts/emulator/beam/beam_bp.c
erts/emulator/beam/beam_emu.c
erts/emulator/beam/bif.c
erts/emulator/beam/copy.c
erts/emulator/beam/erl_alloc.c
erts/emulator/beam/erl_alloc.types
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_bif_port.c
erts/emulator/beam/erl_bif_trace.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_message.c
erts/emulator/beam/erl_port_task.c
erts/emulator/beam/erl_process.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_process_lock.c
erts/emulator/beam/erl_trace.c
erts/emulator/beam/export.h
erts/emulator/beam/global.h
erts/emulator/beam/io.c
erts/emulator/sys/unix/sys.c
erts/emulator/sys/vxworks/sys.c
erts/emulator/test/port_SUITE.erl
erts/etc/unix/cerl.src
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/prim_inet.beam
erts/preloaded/src/prim_inet.erl
lib/hipe/cerl/erl_bif_types.erl
lib/kernel/doc/src/inet.xml
lib/kernel/src/inet.erl
|
|
|
|
* fredrik/inet/export-ip-funcs/OTP-8067:
Inet doc clarifications
Documentation changes inet
Changes to function names, tests and docs of inet
Added specs and doc
Exported ipv4address and ipv6address functions to inet module, changed and made testcases
|
|
|
|
|
|
|
|
|
|
|
