| Age | Commit message (Collapse) | Author |
|---|
|
Extend file_SUITE:read_write_file/1 to test file:write_file/3
which was not tested at all.
While we are it, remove the superfluous roundtrips tests of
term_to_binary/1 and binary_to_term/1. Those BIFs are tested
in detail in other test suites (for example, binary_SUITE in
emulator_test).
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
In 9870d22b2401b, the timetrap for large_write/1 was accidentally
reduced from the default 30 minutes to only 1 minute. That is not
enough for some older computers.
|
|
|
|
While we are it, also re-ident the files.
|
|
Remove out-commented code. Make sure that comments that are not
at the end of a line starts with two '%' characters and not just
one. That will become important later when we'll remove all
?line macros and ask Emacs to re-indent the files.
|
|
Those clause are obsolete and never used by common_test.
|
|
Replace with io:format/2 or ct:pal/3.
|
|
|
|
|
|
?config is ugly and not recommended. Use proplists:get_value/2
instead.
|
|
|
|
As a first step to removing the test_server application as
as its own separate application, change the inclusion of
test_server.hrl to an inclusion of ct.hrl and remove the
inclusion of test_server_line.hrl.
|
|
|
|
* soranoba/fix-file-position/PR-646:
Unify internal error handling
Fix file:pread and :pwrite to use character encoding
Clean up code for file:position/2
Fix file:position (not raw mode)
OTP-13155
|
|
|
|
|
|
The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.
|
|
|
|
|
|
When it called the "file:position", it subtract the size that was
read into the buffer, and returns the value.
However, it has been discarded buffer and correct position is lost,
if "file:postion" returns error.
|
|
|
|
|
|
|
|
This option allows the caller not to go through the file server for information
about files guaranteed to be local.
|
|
* sverk/win-long-filenames/OTP-11813:
erts: Cleanup debug tracing in win_efile.c
erts: Fix file:list_dir for windows paths 258 or 259 chars long
erts: Increase MAXPATHLEN to 4096 for windows
erts: Fix bug in efile_readlink for long win paths
kernel: Fix failed tests in prim_file_SUITE for windows
erts: Fix compiler warning in win_efile.c
erts: Skip tests of paths longer than 255 characters as atoms
erts: Skip tests of file:set_cwd for too long path on Windows
erts: Make file:make_symlink/2 return {error,eperm} on Windows
erts: Revert file:set_cwd impl for windows
erts: Ignore reduntant slashes in windows paths
fix file_SUITE:cur_dir_0 for long windows paths
erts: Fix file_SUITE:make_del_dir for long paths
erts: Fix long windows paths for compressed files
erts: Use GetFullPathNameW to construct abs paths from relative ones
erts: Fix file driver to handle long paths on windows
Conflicts:
erts/emulator/drivers/win32/win_efile.c
|
|
|
|
|
|
if the user has not the privilege SE_CREATE_SYMBOLIC_LINK_NAME
|
|
|
|
Windows do not accept long UNC paths for current working directory.
|
|
|
|
|
|
The sync option adds the POSIX O_SYNC flag to the open system call on
platforms that support the flag or its equivalent, e.g.,
FILE_FLAG_WRITE_THROUGH on Windows. For platforms that don't support it,
file:open/2 returns {error, enotsup} if the sync option is passed in.
The semantics of O_SYNC are platform-specific. For example, not all
platforms guarantee that all file metadata are written to the disk along
with the file data when the flag is in effect. This issue is noted in the
documentation this commit adds for the sync option.
Add a test for the sync option. Note however that the underlying OS
semantics for O_SYNC can't be tested automatically in any practical way, so
the test assumes the OS does the right thing with the flag when
present. For manual verification, dtruss on OS X and strace on Linux were
both run against beam processes to watch calls to open(), and file:open/2
was called in Erlang shells to open files for writing, both with and
without the sync option. Both the dtruss output and the strace output
showed that the O_SYNC flag was present in the open() calls when sync was
specified and was clear when sync was not specified.
|
|
This is to avoid lingering files on windows.
|
|
The file module communicates with a file io server with the following
protocol for file operations:
> {file_request,From,ReplyAs,Request}
< {file_reply,ReplyAs,Reply}
The ReplyAs value is sent by the client side to match against when
receiving the reply and is otherwise left untouched and passed as is by
the server.
This commit enables receive optimizations by using the reference of the
server monitor, changing the protocol to:
> {file_request,From,MonitorRef,Request}
< {file_reply,MonitorRef,Reply}
As the shape of the messages is not changed, backwards compatibility is
not a concern.
|
|
* hb/file_name_type/OTP-10852:
Introduce new type file:name_all()
|
|
|
|
When the run-time system was started with +fnue, the error tuple
indicating a non-translatable filename was added as a non-proper
list tail inside an {ok,Files} term.
|
|
6d516de001dde82c02fe050db8e3aab47914fa90 added prim_file:list_dir_all/1.
Unfortunately, only the first element in the list would be handled
as intended.
|
|
|
|
|
|
When using the async thread pool and compressed files, when
an efile driver port instance is shutdown, the efile_drv
stop callback closes the file descriptor (a gzFile instance
actually) - this is dangerous if at the same time there's
an async thread performing an operation against the file,
for example calling invoke_read(), which can result in a
segmentation fault, or calling invoke_close() which double
closes the gzFile and this in turn causes 2 consecutive calls
to driver_free() against same gzFile instance (resulting in
later unexpected crashes in erl_bestfit_alloc.c for example).
The following test program makes the emulator crash when using
the async thread pool:
-module(t2).
-export([t/1]).
t(N) ->
file:delete("foo.bar"),
% Use of 'compressed' option, for creating/writing the file,
% is irrelevant. It only matters when opening it later for
% reads - a non-compressed file open with the 'compressed'
% option goes through an internal gzFile handle (instead of
% a plain integer fd), just like a compressed file.
%{ok, Fd} = file:open("foo.bar", [raw, write, binary]),
{ok, Fd} = file:open("foo.bar", [raw, write, binary, compressed]),
ok = file:write(Fd, <<"qwerty">>),
ok = file:close(Fd),
Pid = spawn_link(fun() ->
process_flag(trap_exit, true),
loop(N)
end),
Ref = erlang:monitor(process, Pid),
receive
{'DOWN', Ref, _, _, _} ->
ok
end.
loop(0) ->
ok;
loop(N) ->
Server = self(),
Pid = spawn(fun() ->
{ok, Fd} = file:open("foo.bar", [read, raw, binary, compressed]),
Server ! continue,
% Comment the file:read/2 call to make the file:close/1 call much
% more likely to crash or end up causing efile_drv to close twice
% the fd (gzFile), which will make the emulator crash later in the
% best fit allocator (erl_bestfit_alloc.c).
_ = file:read(Fd, 5),
file:close(Fd)
end),
receive continue -> ok end,
exit(Pid, shutdown),
loop(N - 1).
Running this test when using the async thread pool:
shell> erl +A 4
Erlang R15B03 (erts-5.9.3.1) [source] [64-bit] [smp:4:4] [async-threads:4] [hipe] [kernel-poll:false]
Eshell V5.9.3.1 (abort with ^G)
1> c(t2).
{ok,t2}
2> t2:t(500000).
Segmentation fault (core dumped)
When not using the async thread pool, there are no issues:
shell> erl
Erlang R15B03 (erts-5.9.3.1) [source] [64-bit] [smp:4:4] [async-threads:0] [hipe] [kernel-poll:false]
Eshell V5.9.3.1 (abort with ^G)
1> c(t2).
{ok,t2}
2> t2:t(500000).
ok
3>
An example stack trace when the crash happens because there's
an ongoing read operation is:
Thread 1 (Thread 0x7f021cf2c700 (LWP 10687)):
#0 updatewindow (strm=0x2691bf8, out=5) at zlib/inflate.c:338
#1 0x00000000005a2ba0 in inflate (strm=0x2691bf8, flush=0) at zlib/inflate.c:1141
#2 0x000000000055c46a in erts_gzread (file=0x2691bf8, buf=0x7f0215b29e80, len=5) at drivers/common/gzio.c:523
#3 0x00000000005849ef in invoke_read (data=0x26b2228) at drivers/common/efile_drv.c:1114
#4 0x000000000050adcb in async_main (arg=0x7f021bf5cf40) at beam/erl_async.c:488
#5 0x00000000005c21a0 in thr_wrapper (vtwd=0x7fff69c6ff10) at pthread/ethread.c:106
#6 0x00007f021c573e9a in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0
#7 0x00007f021c097cbd in clone () from /lib/x86_64-linux-gnu/libc.so.6
#8 0x0000000000000000 in ?? ()
And when there's an ongoing close operation when the driver
is stopped:
Thread 1 (Thread 0x7fe5f5654700 (LWP 747)):
#0 0x0000000000459b64 in bf_unlink_free_block (block=0x10b2a70, allctr=<optimized out>, flags=<optimized out>) at beam/erl_bestfit_alloc.c:792
#1 bf_unlink_free_block (flags=0, block=0x10b2a70, allctr=0x873380) at beam/erl_bestfit_alloc.c:822
#2 bf_get_free_block (allctr=0x873380, size=<optimized out>, cand_blk=<optimized out>, cand_size=<optimized out>, flags=0) at beam/erl_bestfit_alloc.c:869
#3 0x000000000044f0dd in mbc_alloc_block (alcu_flgsp=<synthetic pointer>, blk_szp=<synthetic pointer>, size=200, allctr=0x873380) at beam/erl_alloc_util.c:1198
#4 mbc_alloc (allctr=0x873380, size=200) at beam/erl_alloc_util.c:1345
#5 0x000000000045449b in do_erts_alcu_alloc (size=200, extra=0x873380, type=165) at beam/erl_alloc_util.c:3442
#6 erts_alcu_alloc_thr_pref (type=165, extra=<optimized out>, size=192) at beam/erl_alloc_util.c:3520
#7 0x000000000055c0bf in gz_open (mode=0x5d98b2 "rb", path=0x1103418 "foo.bar") at drivers/common/gzio.c:164
#8 erts_gzopen (path=0x1103418 "foo.bar", mode=0x5d98b2 "rb") at drivers/common/gzio.c:307
#9 0x0000000000584e47 in invoke_open (data=0x1103330) at drivers/common/efile_drv.c:1857
#10 0x000000000050adcb in async_main (arg=0x7fe5f698af80) at beam/erl_async.c:488
|
|
This operation allows pre-allocation of space for files.
It succeeds only on systems that support such operation.
The POSIX standard defines the optional system call
posix_fallocate() to implement this feature. However,
some systems implement more specific functions to
accomplish the same operation.
On Linux, if the more specific function fallocate() is
implemented, it is used instead of posix_fallocate(),
falling back to posix_fallocate() if the fallocate()
call failed (it's only supported for the ext4, ocfs2,
xfs and btrfs file systems at the moment).
On Mac OS X it uses the specific fcntl() operation
F_PREALLOCATE, falling back to posix_fallocate() if
it's available (at the moment Mac OS X doesn't provide
posix_fallocate()).
On any other UNIX system, it uses posix_fallocate() if it's
available. Any other system not providing this system call
or any function to pre-allocate space for files, this operation
always fails with the ENOTSUP POSIX error.
|
|
|
|
Long input paths (longer than MAX_PATH) would get copied
into a buffer of size MAX_PATH for read_link and altname
in efile_drv.
Also fixed misuse of size_t parameter as wchar_t *
string length in win_efile:efile_readlink.
|
|
|
|
|
|
Temporary workaround until there is a memory info function
conveniantly usable from test suites.
|
|
Windows needs large timeout.
|
