aboutsummaryrefslogtreecommitdiffstats
path: root/lib/megaco
AgeCommit message (Collapse)Author
2019-08-06Merge branch 'lukas/otp/add-dialyzer-make-target/OTP-15915'Lukas Larsson
* lukas/otp/add-dialyzer-make-target/OTP-15915: otp: Add make dialyzer and make xmllint documentation Add 'make dialyzer' target to top and apps
2019-08-01Merge branch 'maint'Micael Karlberg
2019-07-31[megaco|test] Add an event list to the test MGC/MGMicael Karlberg
To provide more info when analyzing failed test cases an "event" queue (of max size 10) is added to both the test MG and MGC. This event queue is printed when the process exist. Also, the multi_ack_timeout is wonky, so add anther platform (sunos) to the skip list...
2019-07-30[megaco|test] Fix copyright end dateMicael Karlberg
2019-07-29[megaco|test] More timing issuesMicael Karlberg
Adjusted some timeouts... Also, add time stamp to the 'delivery' printouts.
2019-07-25[megaco|test] Fixed timer 'start and stop' test caseMicael Karlberg
When cancel'ing a timer, the ok return is either: ok or {ok, Remaining} The test case did not handle this (expected 'ok').
2019-07-25[megaco|test] Improve skip'ing of codec casesMicael Karlberg
2019-07-25[megaco|test] Attempt to catch and handle skip'able TCP casesMicael Karlberg
When waiting for the server command handler to start listening, wait only for so long (5 seconds) and if it has not managed to start listening before then, we *skip* (because something is wrong with the *system*).
2019-07-25[megaco|test] General improvement to "skip handling"Micael Karlberg
2019-07-22[megaco|test] Message in "wrong" order cause test case failMicael Karlberg
It looked like two messages was received in the "wrong" order, cuasing the request_and_reply_plain test case tro fail (on a windows machine). On closer inspection, the reason was that an "unconditional" receive was made when waiting for a (disconnect) callback. But instead we received a secondary message. So, remove the unconditional receive and instead introduce a timeout (10 seconds).
2019-07-22[megaco|test] Failure to start config should result in skipMicael Karlberg
It seems that the megaco_config process did not start (for an unknown reason) and that resulted in a failed test case. But starting the config process was not what the test case was for, so it should have resulted in a skip. Also, since we did not check the result of the config start, we don't know why it failed. So, move the start and stop of the megaco_config process to the [init|end]_per_testcase function(s). If we fail to start, then we skip (with a useful reason).
2019-07-18[megaco|test] Improve handling of skipMicael Karlberg
The load test suite did not properly handle attempts to skip test cases. If we failed to start one of the slave nodes for whatever reason (in this case we got a timeout), this should not result in a failed test case as this is out of the control of the test case. As it was, we *did* try to issue a skip, but the "load controller" did not detect it. It instead transformed it into a regular error.
2019-07-18[megaco|test] Removed the "compile all" compiler directive (mreq)Micael Karlberg
Removed the "compile all" compiler directive for the mreq megaco test suite. This is not actually used in the "top" suite (for some reason). We leave it like that, but still fix the various issues so that it at least work.
2019-07-18[megaco|test] Removed the "compile all" compiler directive (load)Micael Karlberg
Removed the "compile all" compiler directive for the load megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (examples)Micael Karlberg
Removed the "compile all" compiler directive for the examples megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (digit map)Micael Karlberg
Removed the "compile all" compiler directive for the digit map megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (config)Micael Karlberg
Removed the "compile all" compiler directive for the config megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (codec)Micael Karlberg
Removed the "compile all" compiler directive for the codec megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (call flow)Micael Karlberg
Removed the "compile all" compiler directive for the call flow megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (actions)Micael Karlberg
Removed the "compile all" compiler directive for the actions megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (appup)Micael Karlberg
Removed the "compile all" compiler directive for the appup megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (app)Micael Karlberg
Removed the "compile all" compiler directive for the app megaco test suite.
2019-07-17[megaco|test] Removed the "compile all" compiler directive (top)Micael Karlberg
Removed the "compile all" compiler directive for the top megaco test suite.
2019-07-17[megaco|test] Reworked the test generator behaviourMicael Karlberg
Reworked the megaco test generator (megaco_test_generator) behaviour to remove compiler warnings.
2019-07-17[megaco|test] erlang:now() and random cleanupMicael Karlberg
Removed all use of erlang:now() and the deprecated random module from the test suite.
2019-07-17[megaco|test] Make the mib test suite more verboseMicael Karlberg
Make the mib (sub-) test suite more verbose and also do some printout when starting slave nodes (to see just how long time it takes). The connect test case failed on one (possibly) slow host during what looked lite mgc start (timeout). But since there where no printouts during that phase, there is no way to know what was going on.
2019-07-01Merge branch 'maint'Micael Karlberg
2019-07-01Merge branch 'bmk/megaco/20190625/timer_test' into maintMicael Karlberg
2019-07-01Merge branch 'maint'Micael Karlberg
2019-07-01[megaco|test] Make sure more of the (mess) test suite printouts are shownMicael Karlberg
Make the test suite log more readable. Normal io and the debug printouts from megaco does not mix well. Its difficult to know the proper timeline. So add some "sleeps" so that its easier to read.
2019-07-01Merge branch 'maint'Micael Karlberg
2019-07-01Merge branch 'maint'Micael Karlberg
2019-07-01[megaco|test] Misc improvements to the trans test (sub-) suiteMicael Karlberg
The actual "improvement" has to do with io. That is, making sure we get any. A test case failed (on a OpenIndiana VM), which basically only pointed to which line in the test code. But it was impossible to figure out from that what actually had gone wrong. Also removed the 'export all' compiler flag, which caused a whole bunch of unused function to become visible. Commented out those...
2019-07-01[megaco|test] Fixing the examples test suiteMicael Karlberg
The simple test case was faulty in that the simple example (which it is testing) require that the MGC and MG run on different erlang nodes. But the test case did not do this. Instead, it ran both the MGC and the MG on the test server node, which caused the test case to fail 1 time of 10.
2019-07-01[megaco|test] Timer test suite improvementsMicael Karlberg
We did not check the actual result of the timer cancel operation before continuing, which seems to cause problems on some platforms (where the timer may actually expire even though we have 100 ms to cancel). So now we check the cancel result, and if we did not succeed, we instead skip the test case.
2019-07-01[megaco|test] Removed compile_all for mib test sub-suiteMicael Karlberg
2019-07-01[megaco|test] Improving the example and mib test suitesMicael Karlberg
The examples test suite was hard to debug just based on its output (both plain debug printouts and printouts generated via dbg). Some timeouts has been added between the various actions so that it will be easier to understand the output.
2019-06-27[megaco|doc] Change description to noteMicael Karlberg
xmllint did not accept a 'description' tag for the 'DATA TYPE' section. But a 'note' tag worked (it *also* made more sence). OTP-15882
2019-06-27[megaco] Update the app file and some docsMicael Karlberg
OTP-15882
2019-06-27[megaco] Add megaco_user behaviour moduleMicael Karlberg
Add a "proper" behaviour module for the megaco_user behaviour. This behaviour is not a proper behaviour since its possible to configure megaco to add additional arguments to *all* of the functions in the behaviour (with the user_args config option). So, this behaviour only reflects the *default config* (whith the user_args set to [], that is no extra args). OTP-15882
2019-06-27[megaco] Updated behaviour definitionsMicael Karlberg
Made the behaviour definitions of megaco_encoder and megaco_edist_compress follow "modern" standards (which satisfies dialyzer). OTP-15882
2019-06-27[megaco|doc] Fixed a minor errorMicael Karlberg
Removed a single ']' that did no good from the doc... OTP-15882
2019-06-27[megaco] Various chages and corrections dealing with dialyzerMicael Karlberg
Mostly added nowarn_function-attributes to silence dialyzer (for functions that are "future" proofed). But actually also found some errors (although the issues have not been found for almost 15 years, so...). OTP-15882
2019-06-27[megaco|test] Misc improvements to the trans test (sub-) suiteMicael Karlberg
The actual "improvement" has to do with io. That is, making sure we get any. A test case failed (on a OpenIndiana VM), which basically only pointed to which line in the test code. But it was impossible to figure out from that what actually had gone wrong. Also removed the 'export all' compiler flag, which caused a whole bunch of unused function to become visible. Commented out those...
2019-06-26Add 'make dialyzer' target to top and appsLukas Larsson
2019-06-26Add "make test" command for root and application directoriesKjell Winblad
The added make target is described in HOWTO/TESTING.md.
2019-06-25[megaco|test] Attempt to avoid race on slow VMsMicael Karlberg
2019-06-25[megaco|test] Make sure more of the (mess) test suite printouts are shownMicael Karlberg
Make the test suite log more readable. Normal io and the debug printouts from megaco does not mix well. Its difficult to know the proper timeline. So add some "sleeps" so that its easier to read.
2019-06-25[megaco|test] Fixing the examples test suiteMicael Karlberg
The simple test case was faulty in that the simple example (which it is testing) require that the MGC and MG run on different erlang nodes. But the test case did not do this. Instead, it ran both the MGC and the MG on the test server node, which caused the test case to fail 1 time of 10.
2019-06-25[megaco|test] Timer test suite improvementsMicael Karlberg
We did not check the actual result of the timer cancel operation before continuing, which seems to cause problems on some platforms (where the timer may actually expire even though we have 100 ms to cancel). So now we check the cancel result, and if we did not succeed, we instead skip the test case.