aboutsummaryrefslogtreecommitdiffstats
path: root/lib/reltool/test
AgeCommit message (Collapse)Author
2012-03-19[reltool] Fix rollback and undoSiri Hansen
OTP-9794 Backup old configuration before starting re-configuration so rollback is possible if configuration fails. Store last configuration including derivates so undo does no longer need to refresh and analyse everything from disk.
2012-03-19[reltool] Link together escript with inlined applicationSiri Hansen
OTP-9968 Make sure that inlined applications in an escript is included/excluded as the escript itself, and forbid explicit configuration of the inlined application.
2012-03-19[reltool] Update state and tables consistently for all types of config changesSiri Hansen
OTP-9794 OTP-9968 The main idea behind the data structure in reltool_server is that the state shall reflect what is explicitly configured, and the tables shall contain this configuration plus everything that is derived. In some cases, however, this was not the complete truth: * the application table was never read * the module table was never updated on undo * the state contained a lot more than what was explicitly configured This commit re-writes major parts of the reltool_server for the sake of unifying the way the state and tables are updated: * The list of applications in the state now only contains those applications and modules for which there are explicit settings in the configuration (given at startup or changed from the GUI) * When changing any bit of the configuration, the tables are always emptied and every part is derived again from the configuration found in the state * All configuration changes now cause a re-read of the file system, meaning that if something has changed in the file system it will be reflected in the result of the configuration change. This is the case even if no file system related configuration is changed (e.g. root dir or lib dirs) (*POSSIBLE INCOMPATIBILITY*) * Requests for applications and modules from the GUI now always read the tables, not the state * When loading a new configuration file via the GUI, the old configuration is completly scratched, and only the new is valid (*POSSIBLE INCOMPATIBILITY*) * The handling of escripts which include archives of applications is changed to always produce one #app record for the escript in addition to one for each inlined application. All modules are listed as parts of the inlined application where it belongs and not as part of the escript's #app record. This is a temporary solution which will be modified and improved. The following bugs are corrected by this commit: * Loading a config which contains an escript via the GUI menu did not produce the same #app record as when loading the same configuration at reltool start. Paths, version and label could differ. * Loading config with same escript (source) twice caused reltool to add same module twice in #app.mods * Loading config with same escript (inlined beam) twice caused reltool to fail saying module is included by two different applications * Loading config which in addition to an existing escript also adds another escript for which the name sorts before the existing one would cause reltool to fail saying "Application name clash"
2012-03-19[reltool] Add test cases for handling of escriptsSiri Hansen
OTP-9794 OTP-9968 The following test cases are added: * create_standalone_beam * create_standalone_app * create_multiple_standalone * load_config_escript_path * load_config_same_escript_source * load_config_same_escript_beam * load_config_add_escript Most of them are temporarily skipped since they re-produce known problems that will be corrected in a later commit.
2012-03-19[reltool] Add tests for sorting of applications in .rel and .script filesSiri Hansen
OTP-9794 Test cases create_release_sort and create_script_sort are added. The test are temporarily skipped since they detected quite a few bugs that will be corrected with OTP-9792. The following bug is corrected in this commit:' reltool_server did not recognize {App,InclApps} inside a 'rel' specification in the reltool config, e.g. {rel, "myrel", "1.0", [{myapp,[app2]}]}.
2012-03-19[reltool] Add more GUI testsSiri Hansen
OTP-9794 This commit adds a test suite for manual testing of the reltool GUI. By use of test_server:break/1 function, it guides the user through a set of tests in the GUI. Some minor checks are also added to the automatic GUI test, reltool_wx_SUITE.
2012-03-19[reltool] Add more testsSiri Hansen
OTP-9794 Test cases are added for the following functions: * reltool_server:get_sys * reltool_server:set_sys * reltool_server:get_status * reltool_server:gen_rel_files * reltool:eval_target_spec * reltool:get_server
2012-03-19[reltool] Add test case for reltool_server:get_modSiri Hansen
OTP-9794 This test case revealed a bug that occurs when calling reltool_server:get_mod after reltool_server:undo_config. get_mod reads from the module table (ets) and not from the reltool_server state, while undo_config only changes the state. This bug has been corrected, so undo_config now updates both state and tables (it does the same as set_sys).
2012-03-19[reltool] Ensure that tests do not try to start node if target was not createdSiri Hansen
OTP-9794 Some test cases in reltool_server_SUITE tried to create a target system and then start a node running this system. If creation of the target system failed, an attempt would still be made to start the node. This has been corrected so the test is immediately terminated if the target system could not be created.
2012-03-19[reltool] Add test of dependencies derived through calls to external appsSiri Hansen
OTP-9794 This is a test of the mechanism with which reltool_server decides which applications to include and not, based on function calls between applications. This is also the mechanism which forms the base for the application- and module dependency graphs.
2012-03-19[reltool] Add more test cases and fix bugsSiri Hansen
OTP-9794 The following test cases are added for the inteface from GUI to reltool_server: * get_config * get_apps * set_app_and_undo * set_apps_and_undo * load_config_and_undo * reset_config_and_undo * save_config The following bugs were found and corrected: * If set_apps failed, then the state of reltool_server would not be reset to how it was before the failing operation - and every operation done afterwards would also (seem to) fail. * undo_config did not work after reset_config - since faulty #sys record was stored as old_sys. * undo_config did not work after set_app (used when changing the content of an application from the GUI) - since old_sys was not set. Also old_status was not set causing possible warnings to disappear. * undo_config did not work after set_apps (used e.g. when excluding or including an application from the GUI) - since old_sys was not set. Also old_status was not set causing possible warnings to disappear.
2011-05-17Allow same module name in multiple applications if explicitely excludedSiri Hansen
Earlier, reltool expected all module names detected under the lib directories to have unique names. If this was not the case, the result was undefined - i.e. the beam file of the duplicated module might be included in multiple applications in the target area, or it might even be excluded from all applications. This commit adds awareness in reltool that a module might occur in multiple applications, and it is allowed as long as the module or it's application is explicitely excluded in all but one of the containing applications.
2011-03-30Merge branch 'hw/call-chmod-without-f' into devHenrik Nord
* hw/call-chmod-without-f: Call chmod without the "-f" flag Conflicts: erts/emulator/test/Makefile lib/asn1/test/Makefile lib/crypto/test/Makefile lib/debugger/test/Makefile lib/docbuilder/test/Makefile lib/edoc/test/Makefile lib/erl_interface/test/Makefile lib/inviso/test/Makefile lib/parsetools/test/Makefile lib/percept/test/Makefile lib/ssl/test/Makefile lib/syntax_tools/test/Makefile lib/test_server/test/Makefile lib/tools/test/Makefile OTP-9170
2011-03-24Merge branch 'siri/reltool/skip-xref-test-when-debug/OTP-9133' into devSiri Hansen
* siri/reltool/skip-xref-test-when-debug/OTP-9133: Skip reltool_app_SUITE:undef_funcs on debug compiled emulator
2011-03-21Allow app_file option to be keep | strip | all, as documentedSiri Hansen
This is the correction of the bug not allowing the values 'strip' or 'all' for the app_file option in reltool.
2011-03-14Skip reltool_app_SUITE:undef_funcs on debug compiled emulatorSiri Hansen
2011-03-11Update copyright yearsBjörn-Egil Dahlberg
2011-02-17Rename Suite Callback to Common Test HookLukas Larsson
2011-02-17Update and add cover spec files to work with common_testLukas Larsson
2011-02-17Update all test specsLukas Larsson
2011-02-17Fix formatting for reltoolLukas Larsson
2011-02-17Add ts_install_scb to suite/0Lukas Larsson
2011-02-17Update reltool tests to conform with common_test standardLukas Larsson
2011-02-17Remove extra end_per_testcaseLukas Larsson
2011-02-17Update all fin_per_testcase to end_per_testcase.Lukas Larsson
2011-02-17Update tests to work with ts -> ct migrations script.Lukas Larsson
2010-11-15Call chmod without the "-f" flagHolger Weiß
"-f" is a non-standard chmod option which at least SGI IRIX and HP UX do not support. As the only effect of the "-f" flag is to suppress warning messages, it can be safely omitted.
2010-08-13Use proper install methodMartti Kuparinen
Only real program files should be installed with INSTALL_PROGRAM while scripts should be installed with INSTALL_SCRIPT and data files with INSTALL_DATA.
2010-04-28Merge branch 'hawk/reltool' into devErlang/OTP
* hawk/reltool: Make some cleanups Ensure that {error, Reason} is returned even when server dies Introduced a new embedded_app_type option Removed spurious CDATA in documentation Automatically include applications that must be started Add app test SUITE Add app and appup files to reltool Add function to return status about the configuration Improved handling of applications explicitly included releases Created escript for simplified usage from makefiles OTP-8590 hawk/reltool
2010-04-22Make some cleanupsHåkan Mattsson
2010-04-19Automatically include applications that must be startedHåkan Mattsson
Applications that are required to be started before other applications according to their app-file are now automatically included in the release. The kernel and stdlib applications are automatically included.
2010-04-19Add app test SUITEHåkan Mattsson
2010-04-19Add function to return status about the configurationHåkan Mattsson
It is called reltool:get_status/1. The API functions in reltool that may take PidOrOptions as input and actually gets Options does now print out the warnings.
2010-01-26OTP-8343 The documentation is now possible to build in an open sourceLars G Thorsen
environment after a number of bugs are fixed and some features are added in the documentation build process. - The arity calculation is updated. - The module prefix used in the function names for bif's are removed in the generated links so the links will look like http://www.erlang.org/doc/man/erlang.html#append_element-2 instead of http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2 - Enhanced the menu positioning in the html documentation when a new page is loaded. - A number of corrections in the generation of man pages (thanks to Sergei Golovan) - Moved some man pages to more apropriate sections, pages in section 4 moved to 5 and pages in 6 moved to 7. - The legal notice is taken from the xml book file so OTP's build process can be used for non OTP applications.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 12:04:06 +0000