aboutsummaryrefslogtreecommitdiffstats
path: root/lib/reltool
AgeCommit message (Collapse)Author
2013-05-28Fix receive support in erl_eval with a BEAM moduleAnthony Ramine
Using the low-level BEAM instructions, we can loop over each message in the process queue and removes the first message that matches, without receiving them all to later send them back to itself. The function prim_eval:'receive'/2 is equivalent to the following pseudo-code: 'receive'(F, T) -> RESET MESSAGE QUEUE POINTER, LOOP: case PEEK CURRENT MESSAGE WITH TIMEOUT T of {ok,Msg} -> case F(Msg) of nomatch -> DECREMENT TIMEOUT T, ADVANCE MESSAGE QUEUE POINTER, GOTO LOOP; Result -> RESET MESSAGE QUEUE POINTER, Result end; timeout -> RESET MESSAGE QUEUE POINTER, timeout end. To not break Dialyzer and other tools, we use a stub Erlang module which abstract code is forcefully inserted into prim_inet.erl afterwards compilation.
2013-04-30Fix possibly "not owner" error while file copy with reltool.Alexey.Saltanov
2013-04-19[reltool] Remove erlang:port_close/1 for node portSiri Hansen
Test nodes are started with erlang:open_port/2, using the -detached option to erl. -detached causes the port returned from open_port/2 to be closed automatically. Some test cases failed occasionally with a badarg when attempting to close the port with erlang:port_close/1. To avoid this the call to port_close/1 is now removed.
2013-04-08Merge branch 'siri/cuddle-with-tests' into maintSiri Hansen
* siri/cuddle-with-tests: [reltool] Clean up work dir after test [observer] Add debug printouts in ttb_SUITE
2013-03-27[reltool] Clean up work dir after testSiri Hansen
This is to save space in daily tests. Result of failed test cases are still saved.
2013-03-27[reltool] Add test case for missing applicationSiri Hansen
2013-03-27[reltool] Relax requirements on excluded applicationsHåkan Mattsson
A missing application directory is now classified as a warning if the application is explicitly excluded.
2013-03-04[reltool] Increase timetrap timeout for reltool_server_SUTIE to 10 minutesSiri Hansen
The timeout of 5 minutes sometimes expired for test case use_selected_vsn on some platforms.
2013-02-25Prepare releaseOTP_R16BErlang/OTP
2013-02-22Update copyright yearsBjörn-Egil Dahlberg
2013-02-21[reltool] Improve stability of testsSiri Hansen
* Make sure test node is terminated between each test * Wait for expected applications to be started before continuing test * Use ping instead of nodedown messages to check that node is down (to avoid failure due to no flush of inbox)
2013-02-21[reltool] Make escript test work with hipe and smpSiri Hansen
reltool_server_SUITE:create_standalone and create_multiple_standalone failed on test hosts running hipe and smp. The reason was that the escript used in these tests explicitly disabled smp, which in turn made the emulator spit out warnings like this: "<HiPE (v 3.10)> Warning: not loading native code for module beam_lib: it was compiled for an incompatible runtime system; please regenerate native code for this runtime system" This was returned from the escript and did not match the expected result. To overcome this, the escript (reltool/examples/display_args) is changed and does no longer disable smp.
2013-02-21[reltool] Add unicode testSiri Hansen
2013-02-21[reltool] Change ~s to ~ts and ~p to ~tp when appropriateSiri Hansen
2013-02-21[reltool] Add unicode option to re:compile to allow unicode filenamesSiri Hansen
2013-02-21[reltool] Fix reconstruct source from debug_info to handle unicodeSiri Hansen
Also changing from using erl_syntax and erl_prettypr to using erl_pp in order to get better handling of specs.
2013-02-21[reltool] Honour encoding in reltool_utils:prim_consultSiri Hansen
This function is similar to file:consult, except it also operates on a binary (e.g. read from an archive). The function now takes magic encoding comment into account.
2013-01-29Prepare releaseOTP_R16A_RELEASE_CANDIDATEErlang/OTP
2013-01-25Update copyright yearsBjörn-Egil Dahlberg
2013-01-23Turn warnings to errors on selected applicationsBjörn Gustavsson
2013-01-18Merge branch 'nox/enable-silent-rules/OTP-10726'Björn-Egil Dahlberg
* nox/enable-silent-rules/OTP-10726: Implement ./otp_build configure --enable-silent-rules
2013-01-15Implement ./otp_build configure --enable-silent-rulesAnthony Ramine
With silent rules, the output of make is less verbose and compilation warnings are easier to spot. Silent rules are disabled by default and can be disabled or enabled at will by make V=0 and make V=1.
2013-01-15Merge branch 'dgud/wx/fix-wx-2.9-compat/OTP-10407'Dan Gudmundsson
* dgud/wx/fix-wx-2.9-compat/OTP-10407: (26 commits) wx: Fix comments wx: Workaround wx-2.9 bugs wx: Mac fixes wx: Fix demo and tests wx: Allow 64 bits compilation on mac, requires wxWidgets-2.9 appmon: Move runtime part to runtime_tools app reltool: fix wxWidgets-2.9 compability debugger: Fix 2.9 compat observer: Fix check for graphics contexts Observer: Fix distribution dialog observer: Fix font sizes wx: Fix the demo wx: Fix loading icons and cursors in Windows wx: Remove unnecessary casts wx: Fix changed getfunctions wx: Depricate wxCursor new functions wx: Fix int to enum wx: Include correct m4 file in 2.9 wx: Update examples so they work with both wxWidgets 2.8 and 2.9 wx: Modify tests so they work on wxWidgets-2.9 ...
2013-01-09reltool: Remove support for packagesBjörn Gustavsson
2013-01-09reltool: fix wxWidgets-2.9 compabilityDan Gudmundsson
2013-01-09Fix some FOP warningsHans Bolinder
Examples overflowing the width of PDF pages have been fixed. The remaining warnings are due to table cells, and require more work.
2012-09-24[reltool] Use spawn_executable instead of spawn when starting nodes in testSiri Hansen
In order to handle paths with space, spawn_executable is now used instead of spawn when starting nodes with open_port/2 in reltool_server_SUITE.
2012-09-21[reltool] Use application name from .app file instead of directory nameSiri Hansen
In the first traversal of library directories, reltool used only the directory names in order to figure out application names. This would succeed if the directory name was AppName only or AppName-AppVsn and AppVsn consisted of integers separated by dots only. If the AppVsn has any other format, then reltool would not find the correct application name. With this commit, reltool will first look for a .app file and use the .app file name as the application name. This will allow different formats of the version identifier in the directory name. Note that reltool can still not sort (and select the latest) amongst version identifiers of other format than integers separated by dots.
2012-09-17[reltool] Keep order from rel spec when sorting used and included applicationsSiri Hansen
The rel specification now dictates the order in which included and used applications are loaded/started by the boot file. If the applications are not specified in the rel spec, then the order from the .app file is used. This was a bug earlier reported on systools, and is now also implemented in reltool. Example: If a .app file specified {applications,[x,y]} {included_applications,[b,c]} And the reltool.config has {rel, "myrel", "1.0", [a,y,x,c,b]} Then the boot file will load/start y before x and c before b. Earlier x would always be started before y and b always before c due to the order in the .app file.
2012-09-14[reltool] Automatically add included applications in rel fileSiri Hansen
If a 'rel' spec in the reltool config does not contain all applications that are listed as {applications,Applications} in a .app file, then these applications are autmatically added when creating the .rel file. For 'included_applications', the behaviour was not the same. I.e. if a 'rel' spec in the reltool config did not contain all applications that are listed as {included_applications,InclApplications} in a .app file, then reltool would fail with reason "Undefined applications" when creating the .rel file. This has been corrected, so both 'applications' and 'included_applications' are now automatically added if not already in the 'rel' spec. I.e. for an application 'z', if z.app contains {applications,[stdlib,kernel,x]} {included_applications,[y]} then reltool configuration {rel, "myrel", "1.0", [z]} will cause the same .rel file as {rel, "myrel", "1.0", [stdlib,kernel,x,y,z]}
2012-09-12[reltool] Make reltool:install/2 work on windowsSiri Hansen
The erl.ini file generated by reltool:install/2 faulty pointed out $ROOT/bin as Bindir. This is now changed to $ROOT/erts-Vsn/bin. Also, backslashes in erl.ini needed to be escaped.
2012-09-11[reltool] Allow incl_cond=derived on module levelSiri Hansen
According to documentation it should be allowed to set incl_cond=include|exclude|derived, but if set to derived on module level, reltool_server would crash. This has been corrected.
2012-09-03Prepare releaseOTP_R15B02Erlang/OTP
2012-08-31Update copyright yearsBjörn-Egil Dahlberg
2012-08-29Merge branch 'ta/docsmaint' into maintHenrik Nord
* ta/docsmaint: Fix various doc typos for R15B02 Fix various code typos for R15B02 OTP-10245
2012-08-20[reltool] Add documentation for option 'excl_lib'Siri Hansen
2012-08-20[reltool] Add option {excl_lib,otp_root}Siri Hansen
With this option reltool will create a target structure with only the applications found in specified 'lib_dirs' (on system level) or 'lib_dir' (on app level). Erts will not be included, and no applications found under $OTP_ROOT/lib.
2012-07-05Fix various doc typos for R15B02Tuncer Ayaz
2012-06-05Update to work with whitespace in exec pathLukas Larsson
OTP-10106 OTP-10107
2012-05-02Fix include issues in when building testsLukas Larsson
2012-04-01Prepare releaseOTP_R15B01Erlang/OTP
2012-03-29[reltool] Fix dialyzer warnings for R15B01Siri Hansen
Records #mod{} and #app{} are used in ets:select and must therefore have '$1', '$2' and '_' as possible value of fields.
2012-03-23Merge branch 'siri/reltool/app-level-lib-dir/OTP-9977' into maintSiri Hansen
* siri/reltool/app-level-lib-dir/OTP-9977: [reltool] Allow lib_dir on app level to use relative path [reltool] Add configuration parameter lib_dir on application level
2012-03-23Merge branch 'jc/omit-undefined-start_phases-3' into maintSiri Hansen
* jc/omit-undefined-start_phases-3: Avoid undefined start_phases entry in .script Avoid creating an undefined start_phases entry when generating a release OTP-10003
2012-03-22[reltool] Allow lib_dir on app level to use relative pathSiri Hansen
This commit adds a normalization of the directory given with the lib_dir parameter on application level. This will covert the path to absolute, remove trailing slash and any occurrencies of "xxx/..".
2012-03-22[reltool] Add configuration parameter lib_dir on application levelSiri Hansen
As a way of specifying one specific version of an application, the following configuration parameter is added on application level: {lib_dir,Dir}, Dir = string() This can be useful if the parent directory of the application directory is not suitable to use as a lib dir on system level.
2012-03-20[reltool] Improve title of dependency columSiri Hansen
OTP-9792 The colum listing modules that uses the current application or module did earlier have the title "Modules used by others". This is now changed to "Modules using this".
2012-03-20[reltool] Update status bar for all config changes and for generate targetSiri Hansen
OTP-9792 For some configuration changes and during generation of target system, there was no indication in the status bar that reltool was working. This has been corrected - it now says "Processing libraries...".
2012-03-19[reltool] Fix GUI problems on WindowsSiri Hansen
The new warning list did not work on Windows. It could not display tooltips for each warning and the popup window would always disappear behind the main system window. Also, column width did not occur well initially in list controls.
2012-03-19[reltool] Remove skip statement for test that failed due to stdlib errorSiri Hansen
The stdlib error has been corrected in a previous commit so the failing test (reltool_server_SUITE:create_script_sort) can be un-skipped.