| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
rb was only accepting physical filenames as log file.
This patch allow rb to accept now any io_device, valid registered name,
except standard_error which is replaced by standard_io.
Creation of two new exported functions : rb:log_list/0-1
that print in log file if existing, otherwise on standard_io.
Add new functions documentation and tests in rb_SUITE.
|
|
|
|
|
|
|
|
|
|
|
|
OTP-10106
OTP-10107
|
|
|
|
* siri/sasl/doc-regexp-in-appup/OTP-10001:
Add documentation of regular expressions for version numbers in appup
|
|
|
|
OTP-9980
Sasl documentation earlier said that the InclApps parameters in a .rel
file defaults to the empty list. This is not correct. It defaults to
the same value as specified in the .app file.
|
|
|
|
It should not be possible to create a .boot file unless kernel and
stdlib are stated as permanent applications in the .rel file. Note
that 'permanent' is the default start type, so not specifying a start
type for kernel and stdlib is, as always, ok.
|
|
|
|
|
|
|
|
Fix typos or minor faults.
Move out code listing of target_system.erl, and use codeinclude
statement to include this file from sasl/examples directory.
|
|
* siri/sasl/no-warn-missing-sasl/OTP-9738:
Add +no_warn_sasl flag when compiling start_clean.rel
Add option no_warn_sasl to systools:make_script
|
|
This option will suppress the 'missing-sasl' warning which otherwise
is issued when compiling a .rel file which does not include the sasl
application.
|
|
Changes to the mechanism for upgrading the emulator in OTP R15 was
erronously not handled in release_handler:upgrade_app, downgrade_app,
upgrade_script and downgrade_script. This has been corrected,
including test and documentation.
|
|
* siri/sasl/upgrade-erts/OTP-9438:
Fix bug in erts upgrade on windows
Add release vsn info to erts_vsn_changed warning
Check for sasl application in systools:make_script and make_relup
Add syntax check of relup to check_install_release and install_release
Add documentation for upgrade from pre R15 to post R15 sasl
Handle upgrade from pre R15 to post R15 sasl
Step version of sasl to 2.2 for R15
Document upgrade instructions restart_new_emulator and restart_emulator
Wait for two restarts in upgrade_restart test
Add restart_new_emulator instruction to kernel, stdlib and sasl appups
Distinguish restart_new_emulator from restart_emulator in upgrade instructions
Upgrade erts: merge sys.config for tmp release instead of using old
Allow regexp for version in .appup
Restart emulator before running upgrade script when erts is upgraded
Conflicts:
lib/sasl/src/release_handler.erl
lib/sasl/test/release_handler_SUITE.erl
|
|
* jw/release_handler-which-releases:
Add release_handler:which_releases/1
OTP-9717
|
|
|
|
New emulator upgrade mechanism introduced in R15 can only work if the
sasl version to upgrade from is 2.2 or later. I.e. if we are already
running at least R15.
This commit adds backwards compatiblity for upgrades from earlier
versions, meaning that the new code is loaded into the old emulator
and code_change is executed - then after all application code is
updated, the emulator is restarted with the new erts version.
Note that this might cause problems if the new code is compiled with
the new emulator and there have been updates to the beam format. If
this happens, the workaround is to compile the new code with the old
emulator.
|
|
|
|
These dependency files was once used when building the documentation,
but are no longer needed.
|
|
This is an extension to which_releases that allows a user to specify the
status of the releases they wish to be returned. For instance it allows
for quickly determining which release is 'permanent' without the need of
parsing the entire release list.
|
|
|
|
|
|
Given this option, all modules that are to be purged by indicated
upgrade,and that can be soft purged, will be purged when all other
check of check_install_release have been successfully completed.
I added a note under install_release in the reference manual about how
to use check_install_release with this new option in order to speed up
the execution of install_release.
I also added three more test cases for this functionality.
|
|
This commit utilizes the new bif erlang:check_old_code/1 to check if a
module has old code in the system or not before running
erlang:check_process_code/2. This is to optimize
release_handler:install_release (and
release_handler:check_install_release).
A new test is added which checks that after traversing all
processes/modules once and purging all old code, the second run
through this part of the code is "sufficiently" much faster.
A note is also added in the reference manual for
release_handler:install_release about how to go around the efficiency
problem of this function.
|
|
|
|
Filipe David Manana
OTP-9114: [ftp] Added (type) spec for all exported functions.
OTP-9123: mod_esi:deliver/2 made to accept binary data.
Bernard Duggan
OTP-9124: [httpd] Prevent XSS in error pages.
Michael Santos
OTP-9131: [httpd] Wrong security property names used in documentation.
Garrett Smith
OTP-9157: [httpd] Improved error messages.
Ricardo Catalinas Jim�nez
OTP-9158: [httpd] Fix timeout message generated by mod_esi.
Bernard Duggan
OTP-9202: [httpd] Extended support for file descriptors.
Attila Rajmund Nohl
OTP-9230: The default ssl kind has now been changed to essl.
OTP-9246: [httpc] httpc manager crash because of a handler retry
race condition.
Merge branch 'bmk/inets/inet56_integration' into dev
|
|
log_mf_h are given
The sasl application starts and adds log_mf_h handler if all three
environment variables are given and valid. If any of the variables are
invalid, sasl startup will crash.
Earlier, if one or two of the variables were missing sasl would
successfully start but silently skip adding log_mf_h. This commit
changes this behaviour so that sasl startup will crash if some
variables are given and some are not.
|
|
|
|
Add new option <c>src_tests</c> to systools:make_script and
systools:make_tar. The old option <c>no_module_tests</c> is now
ignored as this is the default behaviour.
|
|
bmk/inets/ftp/missing_spec_causes_dialyxer_problems/OTP-9114
Also fixed a bunch of "end-years" (was 2010 but should have been 2011,
which the commit hook not happy with).
|
|
|
|
|
|
Previously, relup file always included an
application:start(Application, permanent) apply instruction for every
application that appear in the UpTo/DowFrom release file, whatever
their start type in the release file.
The new implementation fixes this bug by honoring the start type
according to the rel(5) format. If the start type is none, no apply
line is included in the relup. If the start type is load, the relup
includes instruction to only load the application. Otherwise, the
relup includes an instruction to start the application to the
according type.
The fix is implemented by adding a new parameter to the
add_application high level appup instruction. This new parameter is
documented in appup(5).
|
|
|
|
|
|
|
|
* va/rb-improvements:
New rb:filter/2 to filter reports by date
New rb:filter/1 function to ease report filtering
Modify rb:grep/1 to grep reports using the re module
Fix minor typo in read_report/1
OTP-8443 The re:grep/1 function now uses the 're' module instead of the
deprecated 'regexp' module. There are new functions rb:filter/1
and rb:filter/2 for easier filtering of reports. (Thanks to
Alvaro Videla.)
|
|
The function filter/2 expects a second parameter
Dates that can be used to return reports that
occurred between the provided dates.
Usage:
Dec22 = {{2009,12,22},{0,0,0}}.
Dec24 = {{2009,12,24},{0,0,0}}.
rb:filter(Filters, {Dec22, from}).
%will return reports that occurred from Dec22.
rb:filter(Filters, {Dec22, to}).
%will return reports that occurred before Dec22.
rb:filter(Filters, {Dec22, Dec24}).
%will return reports that occurred between Dec22
% and Dec24
|
|
Currently in the rb module the only way to filter
reports is by using the grep/1 or re/1 functions
that use Regular Expressions.
This new function allow us to specify detailed
filters that will match against our reports.
Since the reports are proplists the filters are
tuples of the form {Key, Value}. If the report
contains that tuple, it will be displayed.
Usage:
1> rb:filter([{"foo", "bar"}, {"abc", "value"}]).
2> rb:filter([{"foo", "bar", no}]).
% excludes reports containing {"foo", "bar"}
3> rb:filter([{"foo", RegExp, re}]).
% the report must contain an element with Key = "foo"
% and Value must match RegExp
|
|
|
|
|
