| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* nox/enable-silent-rules/OTP-10726:
Implement ./otp_build configure --enable-silent-rules
|
|
With silent rules, the output of make is less verbose and compilation
warnings are easier to spot. Silent rules are disabled by default and
can be disabled or enabled at will by make V=0 and make V=1.
|
|
|
|
|
|
rickard/r16/port-optimizations/OTP-10336
* rickard/port-optimizations/OTP-10336:
Change annotate level for emacs-22 in cerl
Update etp-commands
Add documentation on communication in Erlang
Add support for busy port message queue
Add driver callback epilogue
Implement true asynchronous signaling between processes and ports
Add erl_drv_[send|output]_term
Move busy port flag
Use rwlock for driver list
Optimize management of port tasks
Improve configuration of process and port tables
Remove R9 compatibility features
Use ptab functionality also for ports
Prepare for use of ptab functionality also for ports
Atomic port state
Generalize process table implementation
Implement functionality for delaying thread progress from unmanaged threads
Conflicts:
erts/doc/src/erl_driver.xml
erts/doc/src/erlang.xml
erts/emulator/beam/beam_bif_load.c
erts/emulator/beam/beam_bp.c
erts/emulator/beam/beam_emu.c
erts/emulator/beam/bif.c
erts/emulator/beam/copy.c
erts/emulator/beam/erl_alloc.c
erts/emulator/beam/erl_alloc.types
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_bif_port.c
erts/emulator/beam/erl_bif_trace.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_message.c
erts/emulator/beam/erl_port_task.c
erts/emulator/beam/erl_process.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_process_lock.c
erts/emulator/beam/erl_trace.c
erts/emulator/beam/export.h
erts/emulator/beam/global.h
erts/emulator/beam/io.c
erts/emulator/sys/unix/sys.c
erts/emulator/sys/vxworks/sys.c
erts/emulator/test/port_SUITE.erl
erts/etc/unix/cerl.src
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/prim_inet.beam
erts/preloaded/src/prim_inet.erl
lib/hipe/cerl/erl_bif_types.erl
lib/kernel/doc/src/inet.xml
lib/kernel/src/inet.erl
|
|
|
|
|
|
It was possible to insert {Mod::atom(),Vsn::term()} instead of
Mod::atom() in the modules list in a .app file. This was not visible
in the documentation of .app files, but it was visible in the
documentation of application:load/[1,2] (where the .app file term can
be used directly as first argument).
The Vsn part was never used, so this possibility has now been removed.
|
|
|
|
OTP-10106
OTP-10107
|
|
|
|
* jc/omit-undefined-start_phases-3:
Avoid undefined start_phases entry in .script
Avoid creating an undefined start_phases entry when generating a release
OTP-10003
|
|
* siri/sasl/correct-app-name-in-error/OTP-9888:
Fix error message if stdlib has faulty start type in .rel file
|
|
If stdlib had a different start type than permanent, systools_make
would fail but it would say that it was sasl that had faulty start
type. This has been corrected.
|
|
Inorder to align with reltool a {start_phases,undefined} entry in will
no longer occur in the application specification in .script files. The
start_phases entry will only exist if it contains real start phases.
Also, the default value for #application.start_phases is no longer set
to [] in systools.hrl. This value was actually never used, since it
was always explicitly set in systools_make:parse_applications - by
default to 'undefined', so the default value in the record definition
was only a confusing detail. Anyway - now corrected.
|
|
OTP-9984
Applications that are listed in {applications,Apps} in the app file
were not sorted correctly in the script file. They were loaded/started
in the reverse order of how they were listed in the .app file.
This is corrected so they are now sorted (internally between each
other) in the same way as they are listed in the .rel file.
|
|
remove_file in release_handler would fail silently and leave directories
in inconsistent states if there was symlinks in a release directory
also added a test, otp_9864 to test change
|
|
* siri/sasl/check-config-in-tar/OTP-9539:
Check that sys.config and relup have valid content when added to tar
|
|
systools:make_tar now does a minor check of the content of sys.config
and relup before adding them to the tar file. If the content is not
readable or in expected format, the function fails.
|
|
It should not be possible to create a .boot file unless kernel and
stdlib are stated as permanent applications in the .rel file. Note
that 'permanent' is the default start type, so not specifying a start
type for kernel and stdlib is, as always, ok.
|
|
* siri/stdlib/dialyzer-supervisor/OTP-9741:
Add test for upgrade of supervisor
Fix dialyzer warnings in supervisor
|
|
systools:make_tar has recently been updated to store the .rel file
in both releases and releases/<vsn> directories. Ths same commit
removed copying of this file from releases to releases/<vsn> in
release_handler:unpack_release. This commit adde this copy again to
make sure the file is not lost if the tar file was created with an
older systools.
|
|
Dialyzer complained over a mismatch between the callback spec of
Mod:code_change in gen_server and the spec of supervisor:code_change
(which is the implementation of a gen_server Mod:code_change).
This commit changes the callback spec to allow {error,Reason} as
return value. Also, release_handler is updated to handle this return
value.
|
|
systool:make_tar stores the rel file in the releases directory. When
unpacking with release_handler:unpack_release, the file is
automatically moved to releases/<vsn>/. If, however, the tar file is
unpacked manually, the rel file might not be moved, and the next
release unpacked might overwrite the rel file. To overcome this,
systools:make_tar now stores a copy of the rel file in releases/<vsn>/
directly and it is not longer necessary to move the file after
unpacking.
The reason for keeping the file in the releases directory also is that
is needs to be extracted separately before the release version <vsn>
is known.
|
|
* siri/sasl/no-warn-missing-sasl/OTP-9738:
Add +no_warn_sasl flag when compiling start_clean.rel
Add option no_warn_sasl to systools:make_script
|
|
* siri/sasl/xxgrade_app-with-restart/OTP-9735:
Fix release_handler:upgrade_app and downgrade_app when upgrading emulator
|
|
This option will suppress the 'missing-sasl' warning which otherwise
is issued when compiling a .rel file which does not include the sasl
application.
|
|
Changes to the mechanism for upgrading the emulator in OTP R15 was
erronously not handled in release_handler:upgrade_app, downgrade_app,
upgrade_script and downgrade_script. This has been corrected,
including test and documentation.
|
|
|
|
* siri/sasl/upgrade-erts/OTP-9438:
Fix bug in erts upgrade on windows
Add release vsn info to erts_vsn_changed warning
Check for sasl application in systools:make_script and make_relup
Add syntax check of relup to check_install_release and install_release
Add documentation for upgrade from pre R15 to post R15 sasl
Handle upgrade from pre R15 to post R15 sasl
Step version of sasl to 2.2 for R15
Document upgrade instructions restart_new_emulator and restart_emulator
Wait for two restarts in upgrade_restart test
Add restart_new_emulator instruction to kernel, stdlib and sasl appups
Distinguish restart_new_emulator from restart_emulator in upgrade instructions
Upgrade erts: merge sys.config for tmp release instead of using old
Allow regexp for version in .appup
Restart emulator before running upgrade script when erts is upgraded
Conflicts:
lib/sasl/src/release_handler.erl
lib/sasl/test/release_handler_SUITE.erl
|
|
The service which represents the temporary release during erts upgrade
on windows was never deleted. This has been corrected. The service is
now renamed just after the emulator restart.
|
|
|
|
make_script will give warning but allow it
make_relup will fail since it is not possible to upgrade if sasl is
not included in both releases.
|
|
This commit adds a check that all instructions in the relup are
valid. Earlier, the last part (after point_of_no_return) was not
checked before the actual installation started, meaning that if the
relup was hand written, there was a potential for crashing the upgrade
here.
|
|
New emulator upgrade mechanism introduced in R15 can only work if the
sasl version to upgrade from is 2.2 or later. I.e. if we are already
running at least R15.
This commit adds backwards compatiblity for upgrades from earlier
versions, meaning that the new code is loaded into the old emulator
and code_change is executed - then after all application code is
updated, the emulator is restarted with the new erts version.
Note that this might cause problems if the new code is compiled with
the new emulator and there have been updates to the beam format. If
this happens, the workaround is to compile the new code with the old
emulator.
|
|
|
|
The appup files for kernel, stdlib and sasl did not contain any
UpFromVsn and DownToVsn. This means that it was not possible to create
a relup file with systool:make_relup if any of these applications had
changed.
This commit adds entries in the appup files for a maximum of two major
releases back - all with only one upgrade instruction:
restart_new_emulator. The point is to allow relups to be generated,
but ensure that no soft upgrade is done for these three applications -
i.e. they will always cause a restart of the emulator prior to all
other upgrade instructions from other applications.
Test cases (appup_test) are added to kernel_SUITE, stdlib_SUITE and
sasl_SUITE. These all check that expected versions are matched in the
appups, and illegal versions (older than two major releases, or in any
other way illegal) do not match. The test is written in a general way
where it is assumed that the version of these applications are stepped
according the the rule that major releases step the second number,
maintenance releases step the third number and patches step the fourth
number.
|
|
Earlier, there was only one valid instruction to restart the emulator
in an appup/relup script, 'restart_new_emulator'. A new instuction,
'restart_emulator', is now added, and the meaning is as follows:
'restart_new_emulator' is mainly for the core applications (erts,
kernel, stdlib and sasl), and it indicates that there is new core
functionality in the release and the emulator needs to be restarted
before executing the upgrade scripts. If this instruction exists, a
temporary release will be created which consists of the new version
erts, kernel, stdlib and sasl, and the old versions of all other
applications. After restarting the emulator with this temporary
release, the rest of the upgrade instructions are executed, including
loading of new versions.
'restart_emulator' can be used by any application if a restart of the
emulator is needed after the upgrade instructions have been
executed. In this case, the emulator will be restarted with the new
release (i.e. not a tempoarary one) after all other upgrade
instructions for all applications have been excecuted.
|
|
The sys.config file used for the temporary release in an erts upgrade
is now a hybrid where kernel, stdlib and sasl configuration is taken
from the new release, and other configuration is taken from the old
release. I.e. similar to how the temporary boot file is created.
|
|
In order to avoid duplication of upgrade instructions in .appup files,
we now allow regular expressions to specify the UpFrom and DownTo
versions. To be considered a regular expression, the version
identifier must be specified as a binary, e.g.
<<"2\\.1\\.[0-9]+">> will match versions 2.1.x, where x is any number.
|
|
If the version of erts differs between two releases, the release
handler automatically adds a 'restart_new_emulator' instruction to the
upgrade script (relup). Earlier, this instruction was always added at
the end of the upgrade script, causing the following sequence of
operations during an upgrade (a bit simplified):
1. suspend processes
2. load new code
3. execute code_change functions
4. resume processes
5. restart emulator with new erts version
Obviously, this caused the new code to be loaded into the old emulator
and this would fail if the beam format had been changed in the new
version of the emulator.
To overcome this problem, this commit changes the order of the
instructions, so for upgrade with changed erts version we now have:
1. restart emulator with new erts, kernel, stdlib and sasl versions,
but old versions of all other applications.
2. suspend processes
3. load new code
4. execute code_change functions
5. resume processes
This is implemented by creating a temporary release, including new
erts, kernel, stdlib and sasl from the new release and all other
applications from the old release. A new boot file for this temporary
release is created, which includes a new 'apply' instruction to run
release_handler:new_emulator_upgrade/2. Then the emulator is restarted
using this boot file - and release_handler:new_emulator_upgrade/2
executes the rest of the upgrade script.
For downgrade, the order will be as before:
1. suspend processes
2. execute code_change functions with 'down'-indication
3. load old code
4. resume processes
5. restart emulator with old erts version
|
|
This is an extension to which_releases that allows a user to specify the
status of the releases they wish to be returned. For instance it allows
for quickly determining which release is 'permanent' without the need of
parsing the entire release list.
|
|
* jw/release_handler_1:
General improvements to release_handler_1:get_supervised_procs
Conflicts:
lib/sasl/src/release_handler_1.erl
lib/sasl/test/release_handler_SUITE.erl
OTP-9546
|
|
|
|
The core issues this patch attempts to solve is two fold, 1) have
release_handler_1 act slightly differently in two corner cases and 2)
clean up the code in get_supervised_procs/0 to remove nested cases and
etc.
Regarding #1, get_supervised_procs/0 will now call functions to
test to see if the supervisor is suspended before attempting to ask it
for a list of children. It now will print an error message regarding
the suspended supervisor and produce an error that will cause the VM
to restart. Previously it would timeout attempting the call to
which_children and the VM would restart without any details regarding
the reason.
The second corner case is if in a child specification a supervisor is
incorrectly stated to be a worker and get_modules is called against it.
A timeout will occur causing a VM restart. Similar to the last corner
case in this patch an error message is printed and an error is emitted
causing a VM restart.
When first looking into the issue it was hard to discover why my
upgrades where failing. All I received during the upgrade process was
a timeout and a VM restart, no other information. This patch should
help users track down issues like these.
Regarding #2, due to the above confusion in trying to figure out what
had happened I dug into the code and started tracing it through and
found that the nested case statements and etc made it confusing. So I
started to rework and clean up, hopefully making this code path clearer
to future readers.
|
|
If a path was given as ONLY 'ebin' and not for example './ebin', then
systools:make_tar would fail with a function_clause exception in
filename:join/1. The bug was in systools_make:appDir/1, which tried to
find the parent directory of the given path. This function now uses
library functions filename:basename and filename:dirname instead of
general list manipulations.
|
|
Given this option, all modules that are to be purged by indicated
upgrade,and that can be soft purged, will be purged when all other
check of check_install_release have been successfully completed.
I added a note under install_release in the reference manual about how
to use check_install_release with this new option in order to speed up
the execution of install_release.
I also added three more test cases for this functionality.
|
|
This commit utilizes the new bif erlang:check_old_code/1 to check if a
module has old code in the system or not before running
erlang:check_process_code/2. This is to optimize
release_handler:install_release (and
release_handler:check_install_release).
A new test is added which checks that after traversing all
processes/modules once and purging all old code, the second run
through this part of the code is "sufficiently" much faster.
A note is also added in the reference manual for
release_handler:install_release about how to go around the efficiency
problem of this function.
|
|
The appup instruction 'delete_module' would cause a crash during
upgrade if the module to be deleted was not loaded. The reason was
that the release_handler tried to read the version number of the old
module after the code path had changed to point to the new version of
the application. Thus, if the module had not been loaded before the
upgrade, there would no longer be any such module in the path
(delete_module indicates that the module is deleted from the new
version of the application).
This is corrected by letting the release_handler read the old version
of the module only if the module is updated - not if it is
removed. And it is always read before the code path is changed.
|
