aboutsummaryrefslogtreecommitdiffstats
path: root/lib/sasl/src
AgeCommit message (Collapse)Author
2013-11-29Merge branch 'dgud/sasl/no_dot_erlang_boot/OTP-8479' into maintDan Gudmundsson
* dgud/sasl/no_dot_erlang_boot/OTP-8479: sasl: Add no_dot_erlang documentation and tests sasl: Add no_dot_erlang start script
2013-10-16Don't try to add the log_mf_h handler in sasl unless configured to do so.Richard Carlsson
The functions add_error_logger_mf/1 and delete_error_logger_mf/1 in sasl.erl are designed to do nothing if the handler configuration as returned by get_error_logger_mf/0 is 'undefined'. However, that function returns a triple {undefined,undefined,undefined} when the error_logger_mf_* configurations have not been set. This makes SASL always try to add the log_mf_h handler on startup, passing 'undefined' for each of the Dir, MaxB and MaxF parameters. The gen_event callback function log_mf_h:init/1 will then crash with a function_clause error, causing the handler to be silently removed again. This patch fixes the problem by making get_error_logger_mf/0 return the single atom 'undefined' as it is expected to do.
2013-10-03sasl: Add no_dot_erlang start scriptDan Gudmundsson
Sometimes it is wanted to start erlang without loading the user dependent .erlang file, for example in scripts and configure tests.
2013-07-13Add Fd usage in rb loggingcrownedgrouse
rb was only accepting physical filenames as log file. This patch allow rb to accept now any io_device, valid registered name, except standard_error which is replaced by standard_io. Creation of two new exported functions : rb:log_list/0-1 that print in log file if existing, otherwise on standard_io. Add new functions documentation and tests in rb_SUITE.
2013-05-28Fix receive support in erl_eval with a BEAM moduleAnthony Ramine
Using the low-level BEAM instructions, we can loop over each message in the process queue and removes the first message that matches, without receiving them all to later send them back to itself. The function prim_eval:'receive'/2 is equivalent to the following pseudo-code: 'receive'(F, T) -> RESET MESSAGE QUEUE POINTER, LOOP: case PEEK CURRENT MESSAGE WITH TIMEOUT T of {ok,Msg} -> case F(Msg) of nomatch -> DECREMENT TIMEOUT T, ADVANCE MESSAGE QUEUE POINTER, GOTO LOOP; Result -> RESET MESSAGE QUEUE POINTER, Result end; timeout -> RESET MESSAGE QUEUE POINTER, timeout end. To not break Dialyzer and other tools, we use a stub Erlang module which abstract code is forcefully inserted into prim_inet.erl afterwards compilation.
2013-02-22Update copyright yearsBjörn-Egil Dahlberg
2013-02-22[sasl] Adapt release handling mechanisms to unicodeSiri Hansen
* Update systool_lib:read_term/1 to honour magic encoding comment in file. * Add unicode option to re:compile and re:run when appropriate, allowing e.g. unicode filenames. * systools_make to allow unicode strings in .rel and .app files
2013-02-13si_sasl_supp: Eliminate use of tuple funBjörn Gustavsson
2013-02-04Update sasl.appup.src with R16 release and remove R13 versionsSiri Hansen
2013-01-25Update copyright yearsBjörn-Egil Dahlberg
2013-01-23Turn warnings to errors on selected applicationsBjörn Gustavsson
2013-01-18Merge branch 'nox/enable-silent-rules/OTP-10726'Björn-Egil Dahlberg
* nox/enable-silent-rules/OTP-10726: Implement ./otp_build configure --enable-silent-rules
2013-01-15Implement ./otp_build configure --enable-silent-rulesAnthony Ramine
With silent rules, the output of make is less verbose and compilation warnings are easier to spot. Silent rules are disabled by default and can be disabled or enabled at will by make V=0 and make V=1.
2013-01-09sasl: Remove support for packagesBjörn Gustavsson
2013-01-09Prepare OTP files for Unicode as default encodingHans Bolinder
2012-12-07Merge branch 'rickard/port-optimizations/OTP-10336' into ↵Rickard Green
rickard/r16/port-optimizations/OTP-10336 * rickard/port-optimizations/OTP-10336: Change annotate level for emacs-22 in cerl Update etp-commands Add documentation on communication in Erlang Add support for busy port message queue Add driver callback epilogue Implement true asynchronous signaling between processes and ports Add erl_drv_[send|output]_term Move busy port flag Use rwlock for driver list Optimize management of port tasks Improve configuration of process and port tables Remove R9 compatibility features Use ptab functionality also for ports Prepare for use of ptab functionality also for ports Atomic port state Generalize process table implementation Implement functionality for delaying thread progress from unmanaged threads Conflicts: erts/doc/src/erl_driver.xml erts/doc/src/erlang.xml erts/emulator/beam/beam_bif_load.c erts/emulator/beam/beam_bp.c erts/emulator/beam/beam_emu.c erts/emulator/beam/bif.c erts/emulator/beam/copy.c erts/emulator/beam/erl_alloc.c erts/emulator/beam/erl_alloc.types erts/emulator/beam/erl_bif_info.c erts/emulator/beam/erl_bif_port.c erts/emulator/beam/erl_bif_trace.c erts/emulator/beam/erl_init.c erts/emulator/beam/erl_message.c erts/emulator/beam/erl_port_task.c erts/emulator/beam/erl_process.c erts/emulator/beam/erl_process.h erts/emulator/beam/erl_process_lock.c erts/emulator/beam/erl_trace.c erts/emulator/beam/export.h erts/emulator/beam/global.h erts/emulator/beam/io.c erts/emulator/sys/unix/sys.c erts/emulator/sys/vxworks/sys.c erts/emulator/test/port_SUITE.erl erts/etc/unix/cerl.src erts/preloaded/ebin/erlang.beam erts/preloaded/ebin/prim_inet.beam erts/preloaded/src/prim_inet.erl lib/hipe/cerl/erl_bif_types.erl lib/kernel/doc/src/inet.xml lib/kernel/src/inet.erl
2012-12-07Implement true asynchronous signaling between processes and portsRickard Green
2012-10-03Fix release_handler:find_script so it can read regexp in appupsSiri Hansen
2012-09-13Don't allow {Mod,Vsn} in modules list in .app fileSiri Hansen
It was possible to insert {Mod::atom(),Vsn::term()} instead of Mod::atom() in the modules list in a .app file. This was not visible in the documentation of .app files, but it was visible in the documentation of application:load/[1,2] (where the .app file term can be used directly as first argument). The Vsn part was never used, so this possibility has now been removed.
2012-08-31Update copyright yearsBjörn-Egil Dahlberg
2012-06-05Update to work with whitespace in exec pathLukas Larsson
OTP-10106 OTP-10107
2012-03-30Update copyright yearsBjörn-Egil Dahlberg
2012-03-23Merge branch 'jc/omit-undefined-start_phases-3' into maintSiri Hansen
* jc/omit-undefined-start_phases-3: Avoid undefined start_phases entry in .script Avoid creating an undefined start_phases entry when generating a release OTP-10003
2012-03-23Merge branch 'siri/sasl/correct-app-name-in-error/OTP-9888' into maintSiri Hansen
* siri/sasl/correct-app-name-in-error/OTP-9888: Fix error message if stdlib has faulty start type in .rel file
2012-03-20Fix error message if stdlib has faulty start type in .rel fileSiri Hansen
If stdlib had a different start type than permanent, systools_make would fail but it would say that it was sasl that had faulty start type. This has been corrected.
2012-03-20Avoid undefined start_phases entry in .scriptSiri Hansen
Inorder to align with reltool a {start_phases,undefined} entry in will no longer occur in the application specification in .script files. The start_phases entry will only exist if it contains real start phases. Also, the default value for #application.start_phases is no longer set to [] in systools.hrl. This value was actually never used, since it was always explicitly set in systools_make:parse_applications - by default to 'undefined', so the default value in the record definition was only a confusing detail. Anyway - now corrected.
2012-03-19[sasl] Sort applications used by other applications correctly in .scriptSiri Hansen
OTP-9984 Applications that are listed in {applications,Apps} in the app file were not sorted correctly in the script file. They were loaded/started in the reverse order of how they were listed in the .app file. This is corrected so they are now sorted (internally between each other) in the same way as they are listed in the .rel file.
2012-01-18Fix so remove_release can remove symlinksGustav Simonsson
remove_file in release_handler would fail silently and leave directories in inconsistent states if there was symlinks in a release directory also added a test, otp_9864 to test change
2011-12-21Merge branch 'siri/sasl/check-config-in-tar/OTP-9539' into maintSiri Hansen
* siri/sasl/check-config-in-tar/OTP-9539: Check that sys.config and relup have valid content when added to tar
2011-12-20Check that sys.config and relup have valid content when added to tarSiri Hansen
systools:make_tar now does a minor check of the content of sys.config and relup before adding them to the tar file. If the content is not readable or in expected format, the function fails.
2011-12-20Reject systools:make_script if kernel and stdlib are not permanent in .relSiri Hansen
It should not be possible to create a .boot file unless kernel and stdlib are stated as permanent applications in the .rel file. Note that 'permanent' is the default start type, so not specifying a start type for kernel and stdlib is, as always, ok.
2011-11-30Merge branch 'siri/stdlib/dialyzer-supervisor/OTP-9741'Siri Hansen
* siri/stdlib/dialyzer-supervisor/OTP-9741: Add test for upgrade of supervisor Fix dialyzer warnings in supervisor
2011-11-30Keep unpack_release backwards compatible with old systools:make_tarSiri Hansen
systools:make_tar has recently been updated to store the .rel file in both releases and releases/<vsn> directories. Ths same commit removed copying of this file from releases to releases/<vsn> in release_handler:unpack_release. This commit adde this copy again to make sure the file is not lost if the tar file was created with an older systools.
2011-11-29Fix dialyzer warnings in supervisorSiri Hansen
Dialyzer complained over a mismatch between the callback spec of Mod:code_change in gen_server and the spec of supervisor:code_change (which is the implementation of a gen_server Mod:code_change). This commit changes the callback spec to allow {error,Reason} as return value. Also, release_handler is updated to handle this return value.
2011-11-28Add copy of rel file in releases/<vsn> in release tar fileSiri Hansen
systool:make_tar stores the rel file in the releases directory. When unpacking with release_handler:unpack_release, the file is automatically moved to releases/<vsn>/. If, however, the tar file is unpacked manually, the rel file might not be moved, and the next release unpacked might overwrite the rel file. To overcome this, systools:make_tar now stores a copy of the rel file in releases/<vsn>/ directly and it is not longer necessary to move the file after unpacking. The reason for keeping the file in the releases directory also is that is needs to be extracted separately before the release version <vsn> is known.
2011-11-25Merge branch 'siri/sasl/no-warn-missing-sasl/OTP-9738'Siri Hansen
* siri/sasl/no-warn-missing-sasl/OTP-9738: Add +no_warn_sasl flag when compiling start_clean.rel Add option no_warn_sasl to systools:make_script
2011-11-25Merge branch 'siri/sasl/xxgrade_app-with-restart/OTP-9735'Siri Hansen
* siri/sasl/xxgrade_app-with-restart/OTP-9735: Fix release_handler:upgrade_app and downgrade_app when upgrading emulator
2011-11-23Add option no_warn_sasl to systools:make_scriptSiri Hansen
This option will suppress the 'missing-sasl' warning which otherwise is issued when compiling a .rel file which does not include the sasl application.
2011-11-23Fix release_handler:upgrade_app and downgrade_app when upgrading emulatorSiri Hansen
Changes to the mechanism for upgrading the emulator in OTP R15 was erronously not handled in release_handler:upgrade_app, downgrade_app, upgrade_script and downgrade_script. This has been corrected, including test and documentation.
2011-11-21Fix dialyzer warnings in release_handlerSiri Hansen
2011-11-18Merge branch 'siri/sasl/upgrade-erts/OTP-9438'Siri Hansen
* siri/sasl/upgrade-erts/OTP-9438: Fix bug in erts upgrade on windows Add release vsn info to erts_vsn_changed warning Check for sasl application in systools:make_script and make_relup Add syntax check of relup to check_install_release and install_release Add documentation for upgrade from pre R15 to post R15 sasl Handle upgrade from pre R15 to post R15 sasl Step version of sasl to 2.2 for R15 Document upgrade instructions restart_new_emulator and restart_emulator Wait for two restarts in upgrade_restart test Add restart_new_emulator instruction to kernel, stdlib and sasl appups Distinguish restart_new_emulator from restart_emulator in upgrade instructions Upgrade erts: merge sys.config for tmp release instead of using old Allow regexp for version in .appup Restart emulator before running upgrade script when erts is upgraded Conflicts: lib/sasl/src/release_handler.erl lib/sasl/test/release_handler_SUITE.erl
2011-11-17Fix bug in erts upgrade on windowsSiri Hansen
The service which represents the temporary release during erts upgrade on windows was never deleted. This has been corrected. The service is now renamed just after the emulator restart.
2011-11-17Add release vsn info to erts_vsn_changed warningSiri Hansen
2011-11-17Check for sasl application in systools:make_script and make_relupSiri Hansen
make_script will give warning but allow it make_relup will fail since it is not possible to upgrade if sasl is not included in both releases.
2011-11-17Add syntax check of relup to check_install_release and install_releaseSiri Hansen
This commit adds a check that all instructions in the relup are valid. Earlier, the last part (after point_of_no_return) was not checked before the actual installation started, meaning that if the relup was hand written, there was a potential for crashing the upgrade here.
2011-11-17Handle upgrade from pre R15 to post R15 saslSiri Hansen
New emulator upgrade mechanism introduced in R15 can only work if the sasl version to upgrade from is 2.2 or later. I.e. if we are already running at least R15. This commit adds backwards compatiblity for upgrades from earlier versions, meaning that the new code is loaded into the old emulator and code_change is executed - then after all application code is updated, the emulator is restarted with the new erts version. Note that this might cause problems if the new code is compiled with the new emulator and there have been updates to the beam format. If this happens, the workaround is to compile the new code with the old emulator.
2011-11-17Document upgrade instructions restart_new_emulator and restart_emulatorSiri Hansen
2011-11-17Add restart_new_emulator instruction to kernel, stdlib and sasl appupsSiri Hansen
The appup files for kernel, stdlib and sasl did not contain any UpFromVsn and DownToVsn. This means that it was not possible to create a relup file with systool:make_relup if any of these applications had changed. This commit adds entries in the appup files for a maximum of two major releases back - all with only one upgrade instruction: restart_new_emulator. The point is to allow relups to be generated, but ensure that no soft upgrade is done for these three applications - i.e. they will always cause a restart of the emulator prior to all other upgrade instructions from other applications. Test cases (appup_test) are added to kernel_SUITE, stdlib_SUITE and sasl_SUITE. These all check that expected versions are matched in the appups, and illegal versions (older than two major releases, or in any other way illegal) do not match. The test is written in a general way where it is assumed that the version of these applications are stepped according the the rule that major releases step the second number, maintenance releases step the third number and patches step the fourth number.
2011-11-17Distinguish restart_new_emulator from restart_emulator in upgrade instructionsSiri Hansen
Earlier, there was only one valid instruction to restart the emulator in an appup/relup script, 'restart_new_emulator'. A new instuction, 'restart_emulator', is now added, and the meaning is as follows: 'restart_new_emulator' is mainly for the core applications (erts, kernel, stdlib and sasl), and it indicates that there is new core functionality in the release and the emulator needs to be restarted before executing the upgrade scripts. If this instruction exists, a temporary release will be created which consists of the new version erts, kernel, stdlib and sasl, and the old versions of all other applications. After restarting the emulator with this temporary release, the rest of the upgrade instructions are executed, including loading of new versions. 'restart_emulator' can be used by any application if a restart of the emulator is needed after the upgrade instructions have been executed. In this case, the emulator will be restarted with the new release (i.e. not a tempoarary one) after all other upgrade instructions for all applications have been excecuted.
2011-11-17Upgrade erts: merge sys.config for tmp release instead of using oldSiri Hansen
The sys.config file used for the temporary release in an erts upgrade is now a hybrid where kernel, stdlib and sasl configuration is taken from the new release, and other configuration is taken from the old release. I.e. similar to how the temporary boot file is created.