aboutsummaryrefslogtreecommitdiffstats
path: root/lib/sasl/test
AgeCommit message (Collapse)Author
2017-03-10Update copyright yearRickard Green
2017-02-07[systools] Fix return value for warnings_as_errors + silentSiri Hansen
When both options 'warnings_as_errors' and 'silent' were given to systools:make_script or systools:make_relup, no error reason would be returned if warnings occured. Instead only the atom 'error' was returned. This is now corrected. Options 'warnings_as_errors' and 'no_warn_sasl' are now also allowed for systools:make_tar.
2016-12-19Merge branch 'legoscia/remove-watchdog-vestiges/PR-1255/OTP-14112' into maintBjörn-Egil Dahlberg
* legoscia/remove-watchdog-vestiges/PR-1255/OTP-14112: Remove vestiges of watchdog support in heart
2016-12-07Update copyright-yearErlang/OTP
2016-11-21Remove vestiges of watchdog support in heartMagnus Henoch
Hardware watchdog support was removed from heart in R13A, but there were still some vestiges in the code and the documentation. - Remove mentions of the HW_WD_DISABLE variable, as it's no longer used. - Remove the HEART_BEAT_BOOT_DELAY variable, as it was only used for the hardware watchdog.
2016-07-08[sasl test] Skip tests on slow hostSiri Hansen
release_handler_SUITE:otp_9395_update_many_mods and otp_9395_rm_many_mods often fail on test host 'nain' due to a very slow sys call. These tests are now skipped on this host.
2016-07-08[sasl test] Catch erlang:port_close/1Siri Hansen
After starting a node with open_port({spawn_executable,...},...), the resulting port is closed both automatically and by the calling rh_test_lib:cmd/3. To avoid 'badarg' in the case when the automatic is faster, the call to erlang:port_close/1 is now catched.
2016-06-22[sasl test] Extend wait time when starting nodesSiri Hansen
release_handler_SUITE waits for a maximum of 30 sec when starting a node. On slow machines we have seen that startup time sometimes exceed this so the maximum is now extended to 2 minutes.
2016-06-18[sasl test] Do GC before measuring and comparing timeSiri Hansen
release_handler_SUITE:otp_9395_*_many_mods sometimes fail on slow machines. This commit adds an explicit GC before each 'install_release' so GC during test is avoided.
2016-06-18[sasl test] Give some time and try again if nodes are not synchedSiri Hansen
release_handler_SUITE:upgrade_gg (global group) sometimes fails on slow machines. This commit re-tries five times before giving up.
2016-06-08Merge branch 'josevalim/supervisor-get-callback-module/PR-1000/OTP-13619'Siri Hansen
* josevalim/supervisor-get-callback-module/PR-1000/OTP-13619: Return callback module in supervisor format_status
2016-06-04Return callback module in supervisor format_statusJosé Valim
The previous implementation of supervisor:get_callback_module/1 used sys:get_status/1 to get the supervisor inner state and retrieve the callback module. Such implementation forbids any other supervisor implementation that has an internal state different than the #state{} record in supervisor.erl. This patch allows supervisors to return the callback module as part of the sys:get_status/1 data, no longer coupling the callback module implementation with the inner #state{} record. Notice we have kept the clause matching the previous sys:get_status/1 reply for backwards compatibility purposes.
2016-04-22Windows: Skip tests that requires admin privilegesDan Gudmundsson
Windows 8 and later have stronger admin checks which requires erlang to run in privileged shells, ignore for now.
2016-04-13Merge branch 'henrik/update-copyrightyear'Henrik Nord
* henrik/update-copyrightyear: update copyright-year
2016-03-16Update sasl/test/test_lib.hrl with recent versions of kernel and stdlibSiri Hansen
"Old" versions are now taken from OTP-18.0, i.e. one major revision back from OTP-19.
2016-03-15update copyright-yearHenrik Nord
2016-02-19Remove module 'overload' from SASLSiri Hansen
The reason is that the module is not used, and that we se no obvious use case for it.
2016-02-17Remove out-commented references to the test_server applicationsBjörn Gustavsson
Cleanliness.
2016-02-17Makefiles: Remove test_server from include path and code pathBjörn Gustavsson
Since no test suites includede test_server.hrl, there is no need to have test_server in the include path or code path.
2016-02-17Eliminate use of test_server.hrl and test_server_line.hrlBjörn Gustavsson
As a first step to removing the test_server application as as its own separate application, change the inclusion of test_server.hrl to an inclusion of ct.hrl and remove the inclusion of test_server_line.hrl.
2016-02-10Merge branch 'maint'Siri Hansen
Conflicts: lib/stdlib/src/supervisor.erl
2016-02-03Speed up supervisor:count_children/1; simple_one_for_oneRory Byrne
Speed up supervisor:count_children/1 for simple_one_for_one supervisors. This is achieved by avoiding looping through all the child process and verifying that each one is alive. For a supervisor with 100,000 'temporary' children the count-time will drop from approx 25ms to about 0.005ms. For a supervisor with 100,000 'permanent' or 'transient' children the count-time will drop from approx 30ms to about 0.005ms. This avoids having the supervisor block for an extended period while the count takes place. Under normal circumstances the accuracy of the result should also improve since the duration is too short for many processes to die during the count.
2015-10-14Remove the deprecated webtool applicationBjörn Gustavsson
2015-09-07Introduce sasl_report_SUITEBjörn Gustavsson
2015-09-07sasl_SUITE: Add a rudimentary test of the utc_log configurationBjörn Gustavsson
2015-09-07sasl_SUITE: Correct the log_file/1 test caseBjörn Gustavsson
The test case did not test the log files were created. And they were not created, because filelib:ensure_dir/1 was used incorrectly.
2015-06-18Change license text to APLv2Bruce Yinhe
2015-05-28Customize SASL error_logger file opening modesSerge Aleynikov
Include the ability to open a SASL error log file in append mode at startup vs currently implemented "rewrite-always" mode.
2015-02-18Merge branch 'maint'Zandra Hird
2015-01-14[sasl] Make test unreliable of kernel.appupSiri Hansen
release_handler_SUITE:otp_10463_upgrade_script_regexp reads kernel.appup and tries to fetch upgrade instructions for upgrade from current version to current version. The point of the test is to see that release_handler can read an appup with regexps. In some cases, however, kernel.appup does not support upgrade from current to current version, since this is not necessary in real life. Therefore this test is now updated to use a dummy application (release_handler_SUITE_data/regexp_appup/app1) for this test.
2014-10-20[sasl] Remove undocumented upgrade instructionSiri Hansen
The upgrade instruction 'remove_module' was added in OTP R7B (and possibly in a patch in R5B or R6B, ticket OTP-3477), and translates to the low level instruction 'remove', but adds the parameter DepMods (modules on which Mod is dependent). The ticket says that "remove_module should be added for symmetry with the add_module instruction". remove_module was never documented or tested, and it was never mentioned in a release note. It therefore seems to be low risk in removing it. The correct instruction to use when removing a module is {delete_module,Mod} which was added in OTP R10B and which is also documented and tested. This translates to low level instructions 'remove' and 'purge' i.e. the module is brutally purged after setting the current code to old. This hardcoded brutal purge is the reason why PrePurge and PostPurge parameters can not be given with the delete_module instruction. The parameter DepMods which was inclued in the remove_module instruction does not exist for delete_module. From the documentation's point of view, this is the same for add_module, and thus the two instructions {add_module,Mod} and {delete_module,Mod} are now symmetric. However, in the code there is a second instruction for adding a module, {add_module,Mod,DepMods}, which is not documented. To add symmetry even for this, {delete_module,Mod,DepMods} is now also added. Documentation is added for all instructions.
2014-09-30Merge branch 'maint'Henrik Nord
2014-09-25Do not test appup of core apps for upgrade from current vsnSiri Hansen
The appup tests for kernel, stdlib and sasl tests that the appup file allows upgrade from the previous and current major release to the current release. If, in the current release, the application version was not changed compared to the previous release, then we would still test that the appup supported the upgrade (i.e. from current release to current release). This is now changed, in order to avoid test failures on patch releases where kernel, stdlib and sasl are not changed.
2014-05-12Merge branch 'siri/master-cuddle-with-tests'Siri Hansen
* siri/master-cuddle-with-tests: Update sasl/test/test_lib.hrl with recent versions of kernel and stdlib Update crashdump_viewer_SUITE with new release numbers
2014-05-05Fix regexp in release_handler test so versions are correctly replacedSiri Hansen
In order to fake an earlier release to upgrade from, version numbers are replaced in some .app files. This commit adds a backslash before the dot in the pattern to replace, so the dot is not mistaken for a wildcard.
2014-04-25Update sasl/test/test_lib.hrl with recent versions of kernel and stdlibSiri Hansen
2014-04-23Update kernel, stdlib and sasl appup testsSiri Hansen
Add test of update instructions from current major to current minor. Earlier only previous major to current was tested.
2014-04-09Skip test when needed applications are missingSiri Hansen
On some test hosts a lot of applications are skipped from the erlang installation in order to make test go faster. systools_SUITE:app_start_type_relup uses a few applications which therefore might not exist. This commit make sure the test is skipped (instead of fail) if some of the needed applications are missing.
2014-04-09Don't allow slave nodes to survive their test caseSiri Hansen
The slave node from release_handler_SUITE:upgrade_supervisor_fail sometimes survives its test case. Or rather, it is unexpectedly restarted. Every now and then, on a slow machine, this confuses the next test case since test_server:start_node might return the old node name instead of the new. This has been corrected by using {error_action,reboot} in release_handler_SUITE:upgrade_supervisor_fail - to make sure the slave node is really terminated on rollback.
2014-04-03Stop nodes after test cases in release_handler_SUITESiri Hansen
Test cases 'release_handler_which_releases' and 'upgrade_supervisor' did not terminate the nodes they started. This might be the cause of failing test cases further down the suite. This has been corrected.
2014-04-03Add debug printouts in release_handler_SUITE:upgrade_ggSiri Hansen
2014-04-03Improve printout of command when encoding is utf-8Siri Hansen
In release_handler_SUITE, print command with ~ts instead of ~tp in case it contains unicode characters.
2014-03-26Merge branch 'dumbbell/function_clause-in-systools_make-format_error'Siri Hansen
* dumbbell/function_clause-in-systools_make-format_error: sasl: Fix crash in systools_make:format_error/1 OTP-11819
2014-03-24sasl: Fix crash in systools_make:format_error/1Jean-Sébastien Pédron
The crash occurred when systools:make_script/2 raises the 'duplicate_modules' error. Depending on the 'silent' option, systools_make:format_error/1 is called to either format and display an error message, or return a tuple containing the error properties. When displaying a 'duplicate_modules' error message, format_error/1 receives a list of applications providing the same module(s): [ {{Mod,App1,_}, {Mod,App2,_}}, ... ] However, before this fix, format_error/1 expected the following structure, leading to a 'function_clause' exception: [ {{Mod,_,App1,_,_}, {Mod,_,App2,_,_}}, ... ] The crash never occurred with the 'silent' option, because the error and its properties are returned as is to the caller.
2014-02-21Use default timetrap (30 min) for kernel, stdlib and sasl app testsSiri Hansen
These tests start new nodes, and they frequently timed out on some slow test hosts.
2014-02-20Merge branch 'siri/restart_app-type/OTP-11716'Siri Hansen
* siri/restart_app-type/OTP-11716: [sasl] Use restart type from .rel when restarting apps during upgrade
2014-02-20Merge branch 'siri/appup_tests_17/OTP-11534'Siri Hansen
* siri/appup_tests_17/OTP-11534: Update sasl/test/test_lib.hrl with recent versions of kernel and stdlib Update appups and appup tests for kernel, stdlib and sasl
2014-02-18[sasl] Use restart type from .rel when restarting apps during upgradeSiri Hansen
Earlier the 'restart_application' upgrade instruction always cause the application to be restarted as permanent. This could cause the system to end up in an unexpected state after an upgrade. This is now corrected.
2014-02-17Update sasl/test/test_lib.hrl with recent versions of kernel and stdlibSiri Hansen
2014-02-12Update appups and appup tests for kernel, stdlib and saslSiri Hansen
Appups now only support one major release back, and the tests are updated accordingly. Support is also added in tests for giving previous releases in a ct config file, e.g. {otp_releases,[{r15,"/path/to/r15/bin/erl"}, {r16,"/path/to/r16/bin/erl"}, {'17',"/path/to/17/bin/erl"}]}.