| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* maint:
filename: Add safe_relative_path/1
Conflicts:
lib/stdlib/src/filename.erl
|
|
Add safe_relative_path/1 to guard against directory traversal
attacks. It either returns a shorter path without any ".." or
"." components, or 'unsafe' if an ".." component would climb
up above the root of the relative path. Here are a few
examples:
safe_relative_path("a/b/..") => "a"
safe_relative_path("a/..") => ""
safe_relative_path("a/../..") => unsafe
safe_relative_path("/absolute/path") => unsafe
The returned path can be used directly or combined with an
absolute path using filename:join/2.
|
|
Update erl_tar to support PAX format (redux)
OTP-14226
|
|
This commit introduces the following key changes:
- Support for reading tar archives in formats currently in common use,
such as v7, STAR, USTAR, PAX, and GNU tar's extensions to the
STAR/USTAR format.
- Support for writing PAX archives, only when necessary, using USTAR
when possible for greater portability.
These changes result in lifting of some prior restrictions:
- Support for reading archives produced by modern tar implementations
when other restrictions described below are present.
- Support for filenames which exceed 100 bytes in length, or paths which
exceed 255 bytes (see USTAR format specification for more details on
this restriction).
- Support for filenames of arbitrary length
- Support for unicode metadata (the previous behaviour of erl_tar was
actually violating the spec, by writing unicode-encoded data to fields
which are defined to be 7-bit ASCII, even though this technically
worked when using erl_tar at source and destination, it may not have
worked with other tar utilities, and this implementation now conforms
to the spec).
- Support for uid/gid values which cannot be converted to octal
integers.
|
|
|
|
This extends the shell function c/1 and c/2 so that if the argument is a
module name instead of a file name, it automatically locates the .beam file
and the corresponding source file, and then recompiles the module using the
same compiler options (plus any options passed to c/2). If compilation
fails, the old beam file is preserved. Also adds c(Mod, Opts, Filter),
where the Filter argument allows you to remove old compiler options before
the new options are added.
|
|
This moves, extends and exports functionality that previously existed only
internally in filename:find_src/1/2, adding the ability to automatically
substitute file suffixes and use different rules for different suffixes.
|
|
|
|
|
|
* egil/stdlib/gen_event-start-2/OTP-14123:
stdlib: Document gen_event start options
stdlib: Test gen_event options
stdlib: Refactor gen_event_SUITE
stdlib: Remove whitespace error in gen_event_SUITE
stdlib: Add start options to gen_event
stdlib: Remove whitespace errors in gen_event
|
|
|
|
Similar to maps:take/2, add take/2 to the other dictionary
modules in STDLIB:
orddict:take(Key, Dict) -> {Val,NewDict} | 'error'.
dict:take(Key, Dict) -> {Val,NewDict} | 'error'.
gb_trees:take(Key, Dict) -> {Val,NewDict}.
For gb_trees also add:
gb_trees:take_any(Key, Dict) -> {Val,NewDict} | 'error'.
gb_trees already has delete() and delete_any(), so we will
follow that design pattern.
Suggested by Boris Bochkaryov in https://github.com/erlang/otp/pull/1209.
|
|
=== OTP-19.2 ===
Changed Applications:
- common_test-1.13
- compiler-7.0.3
- crypto-3.7.2
- dialyzer-3.0.3
- edoc-0.8.1
- erl_docgen-0.6.1
- erl_interface-3.9.2
- erts-8.2
- eunit-2.3.2
- hipe-3.15.3
- inets-6.3.4
- kernel-5.1.1
- mnesia-4.14.2
- observer-2.3
- odbc-2.12
- parsetools-2.1.4
- public_key-1.3
- runtime_tools-1.11
- sasl-3.0.2
- ssh-4.4
- ssl-8.1
- stdlib-3.2
- syntax_tools-2.1.1
- tools-2.9
- wx-1.8
Unchanged Applications:
- asn1-4.0.4
- cosEvent-2.2.1
- cosEventDomain-1.2.1
- cosFileTransfer-1.2.1
- cosNotification-1.2.2
- cosProperty-1.2.1
- cosTime-1.2.2
- cosTransactions-1.3.2
- debugger-4.2.1
- diameter-1.12.1
- eldap-1.2.2
- et-1.6
- gs-1.6.2
- ic-4.4.2
- jinterface-1.7.1
- megaco-3.18.1
- orber-3.8.2
- os_mon-2.4.1
- otp_mibs-1.1.1
- percept-0.9
- reltool-0.7.2
- snmp-5.2.4
- typer-0.9.11
- xmerl-1.3.12
* tag 'OTP-19.2':
Updated OTP version
Prepare release
Conflicts:
OTP_VERSION
|
|
|
|
* maint:
Update copyright-year
Conflicts:
lib/dialyzer/src/dialyzer.hrl
lib/dialyzer/src/dialyzer_options.erl
lib/dialyzer/test/opaque_SUITE_data/src/recrec/dialyzer.hrl
lib/dialyzer/test/opaque_SUITE_data/src/recrec/dialyzer_races.erl
lib/hipe/icode/hipe_icode.erl
lib/hipe/main/hipe.erl
lib/hipe/main/hipe.hrl.src
lib/hipe/main/hipe_main.erl
|
|
|
|
When at it, types have been added to record fields.
|
|
* richcarl/assert-comments/PR-1224/OTP-14066:
Add comment-versions of assert macros
|
|
For all assert macros in assert.hrl, add corresponding versions with an
additional last Comment argument, assumed to be chardata. If an
exception occurs, it will contain an entry {comment, Comment}, which a
reporting tool may pretty-print for better readability.
|
|
|
|
* mm/stdlib/ord-docs/PR-1242:
Document the ordering used in ordsets and orddicts
|
|
Right now the exact order of elements is not specified, yet many
programs rely on the ordering being the obvious one - erlang term order.
It is only beneficial to make this an explicit part of the
documentation.
|
|
* elbrujohalcon/expand-sup-doc/PR-1233/OTP-14037:
Expand on the behavior of supervisors
|
|
Add additional details on the behavior of supervisors when
reaching maximum restart intensity, as stated by @rvirding
at [Medium](https://goo.gl/XhwpSL)
|
|
Jump functions returns the state after performing jump calculation to a
rand module internal state, which is equivalent to perform a large
number of calls of calculating new states for XorShift*/+ algorithms.
This commit add jump functions for exsplus and exs1024 algorithms, and a
wrapper function jump/1. The wrapper function will cause error with
reason "not_implemented" if the jump function for the algorithm is not
implemented.
This commit adds following new functionalities:
- Add new functions rand:jump/0 and rand:jump/1
- Add the member jump to type alg_handler(), a fun for performing
the jump function
- Add jump functions for exsplus, equivalent to 2^64 calls
- Add jump functions for exs1024, equivalent to 2^512 calls
- Revise seed_put/1, seed/1, seed/2
See <https://github.com/erlang/otp/pull/1235#discussion_r86950557>
- Add dummy jump function for exs64 calling
erlang:error(not_implemented)
- Add jump function test cases as follows:
* Add Common Test group reference_jump
* Add tests for jump/0 to reference_jump_procdict/1
* Rename tests for jump/1 to reference_jump_state/1
* Rename gen_jump/1 to gen_jump_1/1
* Add Common Tests reference_jump_procdict and reference_jump_state
to the group reference_jump
- Add jump function documentation
This commit also changes the Copyright year for Kenji Rikitake's code
from 2015 to 2015-2016.
|
|
|
|
* raimo/gen_statem-improvements/OTP-13929:
Log terminate to sys debug
Optimize event timeout
Rework timeout handling
Clarify the chapter 'Postponing Events' (ERL-284)
Fix doc and type for state enter calls
|
|
|
|
typo
|
|
* gandrade/fmod/PR-1216/OTP-14000:
Add test cases for math:fmod/2 BIF
Support math:fmod/2 BIF on compiler
Add math:fmod/2 BIF
|
|
Returns the (floating point) remainder of first argument divided
by second argument.
|
|
This makes proc_lib behaves like a normal process as far
as the propagation of exceptions is concerned.
Before this commit, the following difference could be
observed:
6> spawn_link(fun() -> ssl:send(a,b) end).
<0.43.0>
7> flush().
Shell got {'EXIT',<0.43.0>,
{function_clause,
[{ssl,send,[a,b],[{file,"..."},{line,275}]}]}}
ok
8> proc_lib:spawn_link(fun() -> ssl:send(a,b) end).
<0.46.0>
9> flush().
Shell got {'EXIT',<0.46.0>,function_clause}
After this commit, we get the following instead:
3> flush().
Shell got {'EXIT',<0.61.0>,
{function_clause,
[{ssl,send,[a,b],[{file,"..."},{line,275}]},
{proc_lib,init_p,3,[{file,"..."},{line,232}]}]}}
The stacktrace will show minor differences of course
but the form is now the same as without proc_lib.
The rationale behind this commit is that:
* We now have a single form regardless of how the process
was started
* We can use the stacktrace to programmatically alter behavior
(for example an HTTP server identifying problems in input
decoding to send back a generic 400, or a 500 otherwise)
* We can access the stacktrace to print it somewhere (for
example an HTTP server could send it back to the client
when a debug mode is enabled)
|
|
* maint:
stdlib: Correct shell_default(3)
|
|
|
|
Do not start an event timer unless there are no enqueued events.
|
|
Handling of timers and timeouts has been cleaned up
and generalized.
Semantic change regarding state timeout zero:
Previously if one state caused a state timeout zero and
managed to stay in the same state to insert additional
timeout zero(s) in the next state callback invocation, then
there would be only one timeout zero event. The mindset
was that the machine was faster then the timeout zero.
This has changed with the mindset that all state callback
invocations should be independent, so now the machine will
get one state timeout zero event per started state timeout
zero.
Note that just using zero timeouts is fairly esoteric...
|
|
|
|
|
|
* raimo/gen_statem-improvements/OTP-13929:
Fix race condition in cancel_timer/1
Use parameterized types
Implement state timeouts
Improve docs and types
Change state entry events into state enter calls
Improve docs
Improve docs
Implement state entry events
Implement call/3 dirty_timeout
|
|
|
|
|
|
|
|
|
|
=== OTP-19.1 ===
Changed Applications:
- asn1-4.0.4
- common_test-1.12.3
- compiler-7.0.2
- crypto-3.7.1
- debugger-4.2.1
- dialyzer-3.0.2
- diameter-1.12.1
- edoc-0.8
- erl_docgen-0.6
- erl_interface-3.9.1
- erts-8.1
- eunit-2.3.1
- gs-1.6.2
- hipe-3.15.2
- ic-4.4.2
- inets-6.3.3
- jinterface-1.7.1
- kernel-5.1
- mnesia-4.14.1
- observer-2.2.2
- odbc-2.11.3
- parsetools-2.1.3
- reltool-0.7.2
- runtime_tools-1.10.1
- sasl-3.0.1
- snmp-5.2.4
- ssh-4.3.2
- ssl-8.0.2
- stdlib-3.1
- syntax_tools-2.1
- tools-2.8.6
- wx-1.7.1
- xmerl-1.3.12
Unchanged Applications:
- cosEvent-2.2.1
- cosEventDomain-1.2.1
- cosFileTransfer-1.2.1
- cosNotification-1.2.2
- cosProperty-1.2.1
- cosTime-1.2.2
- cosTransactions-1.3.2
- eldap-1.2.2
- et-1.6
- megaco-3.18.1
- orber-3.8.2
- os_mon-2.4.1
- otp_mibs-1.1.1
- percept-0.9
- public_key-1.2
- typer-0.9.11
Conflicts:
OTP_VERSION
lib/gs/doc/src/notes.xml
lib/gs/vsn.mk
|
|
|
|
|
|
|
|
|
|
Add math:floor/1 and math:ceil/1 to avoid unnecessary conversions
in floating point expressions. That is, instead of having to write
float(floor(X)) as part of a floating point expressions, we can
write simply math:floor(X).
|
