| Age | Commit message (Collapse) | Author |
|---|
|
gen_server_SUITE:start often fails since a call which is expected to
give 'noproc' error instead gives 'stopped' error. This happens when
the call is done before the process is really dead. To overcome this
problem, we now wait for the process exit before doing the call.
|
|
|
|
While we are it, also re-ident the files.
|
|
We want to re-ident the source files after having taken out
all ?line macros. When re-indenting using Emacs, it's important
that comments that should be at the beginning of a line (or
follow the indentation of statements around it) must start with
"%%".
|
|
|
|
|
|
|
|
Note that the sleeping time in ct:sleep/1 will be scaled if
the test is run with (for example) cover. When it is important
that the sleep time is not adjusted, use timer:sleep/1.
|
|
|
|
|
|
Either rely on the default 30 minutes timetrap, or set the timeout
using the supported methods in common_test.
|
|
As a first step to removing the test_server application as
as its own separate application, change the inclusion of
test_server.hrl to an inclusion of ct.hrl and remove the
inclusion of test_server_line.hrl.
|
|
|
|
The running time for gen_server_SUITE:hibernate/1 is about 12 seconds
because of 1000 ms sleeps in the test case. Introduce a helper
function to avoid sleeping more than necessary.
While we are it, also remove all ?line macros in the test case.
|
|
|
|
If a callback function was terminated with exit/1, there would be no
stack trace in the ERROR REPORT produced by gen_server. This has been
corrected. The actual exit reason for the process is not changed.
|
|
|
|
The format_status callback (if exists) should always be invoked when
logging errors.
|
|
The functions utilize proc_lib:stop, which in turn utilizes
sys:terminate.
|
|
Add two new system callbacks Module:system_get_state/1 and
Module:system_replace_state/2 to allow sys:get_state/1,2 and
sys:replace_state/2,3 to operate correctly even if a process is sys
suspended. Modify gen_server, gen_fsm, and gen_event to support the new
callbacks.
If a callback module does not export these functions, then by default the
Misc value (the same as that passed as the final argument to
sys:handle_system_msg/6, and returned as part of the return value of
sys:get_status/1,2) is treated as the callback module's state.
The previous behaviour of intercepting the system message and passing a
tuple of size 2 as the last argument to sys:handle_system_msg/6 is no
longer supported.
Add tests to verify the correctness of sys:get_state/1,2 and
sys:replace_state/2,3 when processes are sys suspended. Add two tests for
modules that implement special processes, one that exports
system_get_state/1 and system_replace_state/2 and one that doesn't.
Much of the credit for this patch goes to James Fish, who reported the
initial problem and implemented much of the fix.
|
|
This test always fails when gen is native compiled, since the
optmization is not implemented then. The test is now skipped when
running with hipe.
The test does also quite often fail on one of the test hosts which
runs in a virtual machine. The reason is that the clock runs "in
bursts" on this host, which is outside of the control of the erlang VM
and probably due to the fact that the host runs as a virtual
machine. To overcome this problem, the echo message is now sent 10000
times instead of 10 times - i.e. the test run is prolonged in order to
even out the effect of the bursts.
|
|
|
|
At Erlang Factory 2013 there was discussion during one of the talks about
the sys:get_status functions and how useful they were for debugging. Geoff
Cant mentioned it would be very useful if the sys module also provided
functions to use while debugging to get just the state of a process and
also to be able to replace the state of a process, and many others in the
audience appeared to agree.
The sys:get_state/1,2 functions return the state of a gen_server, gen_fsm,
or gen_event process. The return value varies depending on the process
type: process state for a gen_server, state name and state data for a
gen_fsm, and handler module, handler id, and handler state for each handler
registered in a gen_event process.
The sys:replace_state/2,3 functions allow the state of a gen_server,
gen_fsm, or gen_event process to be replaced with a new state. These
functions take a function argument that updates or replaces the process
state; using a function to change the state eliminates the race condition
of first reading the state via sys:get_state/1 or sys:get_state/2, using
its return value to create a new state, and then replacing the old state
with the new state, since during that time the process might have received
other calls or messages that could have changed its state.
* For a gen_server process, the state replacement function takes the
process state as an argument and returns a new state.
* For a gen_fsm process, the state replacement function gets a tuple of
{StateName, StateData} and returns a similar tuple that specifies a new
state name, new state data, or both.
* For a gen_event process, the state replacement function is called for
each registered event handler. It gets a tuple {Module, Id, HandlerState}
and returns a similar tuple that specifies the same Module and Id values
but may specify a different value for HandlerState.
If the state replacement function crashes or results in an error, the
original state of a gen_server or gen_fsm process is maintained; if such a
crash occurs for a gen_event process, the original state of the event
handler for which the state replacement function was called is maintained,
but the states of other event handlers of the same gen_event process may
still be updated if no errors or crashes occur while replacing their
states.
Add documentation for sys:get_state/1,2 and sys:replace_state/2,3. The
documentation explicitly notes that the functions are intended for use
during debugging.
Add new tests for these functions to gen_server_SUITE, gen_fsm_SUITE, and
gen_event_SUITE.
|
|
|
|
Conflicts:
lib/diameter/autoconf/vxworks/sed.general
xcomp/README.md
|
|
|
|
|
|
to match on result of a gen_server:call/2
|
|
to match global scope in ServerName without timeout.
OTP-10130
|
|
OTP behaviour instances (gen_server, gen_fsm, gen_event) can currently
register themselves either locally or globally, and the behaviour
libraries (including gen.erl) support both addressing methods, as well
as the normal Pid and {Name, Node}.
However, there are alternative registry implementations - e.g. gproc -
and one can well imagine other ways of locating a behaviour instance,
e.g. on a node connected only via a TCP tunnel, rather than via
Distributed Erlang. In all these cases, one needs to write extra code
to identify the behaviour instance, even though the instance itself
need not be aware of how it is located.
This patch introduces a new way of locating a behaviour instance:
{via, Module, Name}.
Module is expected to export a subset of the functions in global.erl,
namely:
register_name(Name, Pid) -> yes | no
whereis_name(Name) -> pid() | undefined
unregister_name(Name) -> ok
send(Name, Msg) -> Pid
Semantics are expected to be the same as for global.erl
This can be used in all places where {global, Name} is accepted.
faulty export in gen_fsm_SUITE.erl
await process death in dummy_via:reset()
fix error in gen_[server|fsm]:enter_loop()
fix documentation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The gen_fsm, gen_server, and wx_object format_status implementations
fail to handle global names of the form {global, term()} where term()
is something other than an atom, pid, or list. Change these
format_status implementations to treat names that are atoms, pids, or
lists as before, but for all other terms, set the header property of
the function return value to a tuple whose first element is a string
describing the return value and whose second element is the name term.
Add unit tests for gen_server and gen_fsm to verify sys:get_status
calls work successfully for globally registered instances.
|
|
When a gen_server or gen_fsm process terminates abnormally, sometimes
the text representation of the process state can occupy many lines of
the error log, depending on the definition of the state
term. Developers sometimes would like a way to trim out parts of the
state from the log if those parts don't contribute to documenting the
circumstances of the error, thereby helping to reduce the amount of
logged output.
Since the format_status callback can already format and specialize
gen_server and gen_fsm state for inclusion in the term returned from
sys:get_status, this patch extends format_status in a
backward-compatible way to also be able to specialize the state logged
for abnormal gen_server and gen_fsm termination, and includes new unit
tests to verify the new functionality.
This patch also eliminates the previous restriction that the status
returned by format_status must be a list. It can now be any term.
The documentation is extended to cover the new usage for
format_status, and it's been improved to recommend a form for the
normal case that allows the returned status to fit well with the rest
of the term returned by sys:get_status. The documentation is clear
that this form is only recommended, not required.
|
|
* bg/opt-receive:
Test that gen_server:call/2,3 are fast even with a huge message queue
erts: Add tests for the receive optimization
Update primary bootstrap
erts: Implement recv_mark/1 and recv_set/1 for real
compiler tests: Cover the error handling code in beam_receive
compiler test: Test optimization of receive statements
Optimize selective receives in the presence of a large message queue
Introduce the new recv_mark/1 and recv_mark/1 instructions
Compile tests that communicate with R12 nodes with the r12 option
Move p_run/2 to test_lib
gen: Inline wait_resp_mon/2 to help the compiler optimize
OTP-8623 bg/opt-receive
reveive statements that can only read out a newly created reference are now
specially optimized so that it will execute in constant time regardless of
the number of messages in the receive queue for the process. That
optimization will benefit calls to gen_server:call(). (See gen:do_call/4
for an example of a receive statement that will be optimized.)
|
|
|
|
Restore the ability for gen_server and gen_fsm callback
modules to format their own state for display under the
sys:get_status/1,2 calls.
This ability is extremely useful for new behavior modules
based on gen_server or gen_fsm, so that they can display
their status in a more meaningful way than just dumping
the state record. It is also generally useful for applications
wanting to display their gen_server or gen_fsm callback module
state in something other than the default manner.
Also document the previously undocumented the
gen_server:format_status/2 and gen_fsm:format_status/2 optional
callback functions that, if exported by the callback module, are
invoked when sys:get_status/1,2 are called.
Add unit tests to ensure that format_status/2 functions exported
from a gen_fsm callback module and a gen_server callback module
are called when sys:get_status/1,2 are called.
|
|
|
