| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* origin/peppe/common_test/force_stop:
Repair broken force_stop functionality
OTP-10832
|
|
* sverk/valgrind-cuddling:
test_server: Increase timeout for VALGRIND
erts: Use native atomics and fallback spinlock to mutex for VALGRIND
|
|
|
|
|
|
|
|
Errors are printed to unexpected_io log.
|
|
The unicode update of test_server for R16A introduced a few potential
errors when logging to files. Sometimes ~tp or ~ts was used for
formatting also when writing to files that were not opened with the
{encoding,utf8} option. If then the argument contained unicode
characters above 255, the file descriptor would crash. This has been
corrected by the following modifications:
* Since the 'unexpected_io' log file is used only when the test case
HTML file is not available (e.g. between test cases), this file is
now also a HTML file and as other test_server HTML logs it is always
UTF-8 encoded
* Since it is possible to change which information is going to which
log file (with test_server_ctrl:set_levels/3), we do not have full
control over which information is written to which file. This means
that any printout could be written to the 'major' log file
(suite.log), which was earlier encoded as latin1. To avoid crashing
this file descriptor due to unicode strings, the 'major' log file is
now also encoded in UTF-8 (possible incopatibility).
* The cross_cover.info file is no longer a text file which can be read
with file:consult/1, instead it is written as a pure binary file
using term_to_binary when writing and binary_to_term when reading.
* The encoding of the file named 'last_name', which only content is
the path to the last run.<timestamp> directory, is now dependent on
the file name mode of the VM. If file names are expected to be
unicode, then the 'last_name' file is UTF-8 encoded, else it is
latin1 encoded.
Also, ~tp is changed back to ~p unless it is somehow likely that the
argument includes strings. It is not obvious that this is the correct
thing to do, but some decission had to be taken...
|
|
|
|
* siri/unicode:
[test_server] Don't escape : and @ in test log links
[test_server] Don't create latin1 filenames if filename mode is utf8
[test_server] Ensure correct encoding in header for erl2html2:convert
[common_test] Update common test modules to handle unicode
[ts] Use unicode:characters_to_list/2 instead of binary_to_list/1
[test_server] Add tests for unicode support
[test_server] Write link target with correct encoding in erl2html2
[test_server] Update test_server to handle unicode
Update preloaded init.beam
Make arguments given with -s option to erl aware of file name encoding
OTP-10702
OTP-10783
|
|
|
|
If escaping :, then links of type "file:///c:/ldisk..." will not work.
Escaping @ does not create any problems, but the link becomes harder
to read and most modern browsers can handle this.
|
|
Skipping test_server_latin1_***_SUITE if filename:native_name_encoding
is utf8.
|
|
When running under framework common_test, the encoding statement in
the HTML header of the file generated with erl2html2:convert would
sometimes be faulty. This has been corrected.
|
|
When reading text files with file:read_file/1, assume that the file
has the default encding (epp:default_encoding()) and covert the binary
to string by unicode:characters_to_list(Bin,DefaultEncoding) instead
of binary_to_list(Bin) as before.
|
|
|
|
If the encoding of the source file was utf-8, then the link target
could be faulty encoded in the resulting HTML file. This has been
corrected.
|
|
* Use UTF-8 encoding for all HTML files, except the HTML version of
the test suite generated with erl2html2:convert, which will have the
same encoding as the original test suite (.erl) file.
* Encode link targets in HTML files, allowing both special characters
like "/", "&", "?" etc, and latin1 or unicode characters.
* Use unicode modifier 't' with ~s and ~p when appropriate.
* Use unicode:characters_to_list and unicode:characters_to_binary for
conversion between binaries and strings instead of binary_to_list
and list_to_binary.
|
|
|
|
|
|
* lh/forget-mnemosyne/OTP-10729:
Remove what remains of the Mnemosyne code
Remove support for the query keyword and query expressions
|
|
* nox/enable-silent-rules/OTP-10726:
Implement ./otp_build configure --enable-silent-rules
|
|
|
|
With silent rules, the output of make is less verbose and compilation
warnings are easier to spot. Silent rules are disabled by default and
can be disabled or enabled at will by make V=0 and make V=1.
|
|
* siri/cross-cover/OTP-9870:
[test_server] Don't use print/3 in cross_cover_analyse
[common_test] Add documentation for cross cover analysis
[common_test] Add test case for cross cover mechanism
[test_server] Update documentation about cross cover
[test_server] Add test of code cover mechanism
[test_server,common_test] Fix cross cover mechansim
|
|
|
|
* siri/cover/new-bugs-r16/OTP-10638:
[cover] Cleanup by stopping cover between tests
[common_test] Stop cover on slave node after node is terminated
[test_server] Stop cover on node after node is terminated
[cover] Fix timing dependent bug in cover_SUITE:reconnect
[cover] Remove stopped node also from lost_nodes list
[cover] Don't mark stopped node as lost
|
|
Code written by Siri Hansen.
|
|
Before terminating slave nodes, test_server calls cover:flush/1 to
fetch data from the node without actually stopping cover on this
node. If cover is not stopped for the node and a new node with the
same name is started, then cover will be started on the new node. To
avoid this test_server now calls cover:stop/1 after the slave node is
terminated.
|
|
Cross cover analysis is executed outside the scope of
test_server_ctrl, i.e. test_server_ctrl is not necessarily
started. This may cause test_server_ctrl:print/3 to hang. Instead use
io:fwrite directly (as it was before).
|
|
Add info about cross statement in cover file:
{cross,[{Tag,Modules}]}.
Add parameter Tests = [{Tag,Dir}] to test_server_ctrl:cross_cover_analyse
|
|
|
|
Update the interface for cross cover analysis (collection of cover
data over multiple tests) so it can be used via common_test and
directly with test server.
The concept of 'application' in the cross cover interface is removed
and replaced with an arbitrary Tag=atom() which identifies a test run.
|
|
The R15B03 release
|
|
|
|
* bjorn/ct/separate-io-server/OTP-10101:
Fix race condition in test_server_io
|
|
|
|
|
|
* siri/test_server/erl2html-indent-problem/OTP-9710:
[test_server] Minimize memory usage in erl2html2:convert/[2,3]
[test_server] Fix erl2html2.erl to handle badly indented files
|
|
Reading form by form and line by line, instead of reading the complete
file in one go.
|
|
Line numbering of erlang files that were not correctly indented could
be wrong after coverting to html with erl2html2:convert/[2,3]. This has
been corrected.
This commit also fixes the following:
* There are now link targets for each line and not only for each 10th
line - meaning that links from test logs are now to the exact line,
and not to the last number for which N rem 10 == 0.
* there will only be one link target per function, i.e. the faulty
link targets for function clauses are removed.
* link targets for function now includes the arity (e.g. func/1 has a
link target "func-1")
And some tests are added.
|
|
In test_server_io:gc/1 we collect the group leaders for all processes.
We must handle the case that a process has died after processes/0
was called and process_info(P, group_leader) is called.
|
|
* siri/test_server/break-in-end_per_testcase/OTP-10046:
[test_server] Cancel timetrap for break in end_per_testcase
|
|
Any call to test_server:break/1 should cancel all active
timetramps. In some cases, Suite:end_per_testcase/2 is executed on a
different process than the test case itself, and if
test_server:break/1 would be called from there, the timetraps would
not be cancelled. This has been corrected.
|
|
|
|
test_server_h will now recognize info_reports written by ct connection
handlers (according to the description in cth_conn_log) and ignore
them as they will be completely handled by by ct_conn_log_h.
Earlier test_server_h would print a tag (testcase name) before
forwarding the report to error_logger_tty_h. This would cause lots of
tags in the log with no info report following (since
error_logger_tty_h did not handle them).
|
|
* bjorn/ct/minor-corrections:
test_server_io: Correct a few comments
Handle ct:abort_current_testcase/1 when executing parallel groups
Make sure that "Cover analysing..." is written to stdout
Make sure that "Testing..." is not written if testing has finished
|
|
The support for remote target nodes has not worked in a long time.
We are unlikely to ever need remot target node support and if
we'll need it will be easier to start over from scratch.
|
|
|
|
ct:abort_current_testcase/1 (which is a wrapper for the function
with the same name in test_server_ctrl) would not work as expected
when a group with parallel test cases was executing. Essentially,
the abort_current_testcase message would be ignored until the group
has finished and would then abort the end_per_group testcase for
the group.
Since there is no unique current testcase when a parallel group is
executing, we must handle the abort_current_testcase message and
return an error tuple.
Also fix the bug that test_server_ctrl:abort_current_testcase/1
would always return 'ok'.
|
