| Age | Commit message (Collapse) | Author |
|---|
|
Under controlled circumstances (and we are in control of the
circumstances), filename:join/2 can be replaced with '++'.
'++' is faster because it is implmented in C, does not need to
look at the list elements it copies, and does not need to copy
its right operand.
|
|
Commit 70b5e24c9498225fadc08d19503269c8aad851bf broke
filelib:wildcard(Pattern, ".").
Over the years, the logic for filelib:wilcard() has become a mess
of special cases.
Probably because of premature optimization, filelib:wildcard(Pattern)
and filelib:wildcard(Pattern, Cwd) are handled differently.
They can be consolidated if we use a "." as the default Cwd argument.
We can also simplify things by compiling the Cwd argument into the
wildcard. We did not that in the initial implementation because it
used to be possible to pre-compile a wildcard and pass it to
filelib:wildcard/{1,2}. Since that is no longer possible, there is
no point in keeping the compiled wildcard "portable" (not dependent
on the Cwd argument).
|
|
It is confusing. Rename our own exception-generating function to
badpattern/1.
|
|
filelib:wildcard() will no longer support "raw filenames", so it
makes no sense for it to accept a binary Cwd argument.
|
|
In R16B, file:list_dir/1 will never return binaries.
|
|
|
|
* pan/unicode_filename_warnings:
Add file:list_dir_all/1 and file:read_link_all/1
prim_file: Add list_dir_all() and read_link_all()
Teach prim_file:set_cwd() to avoid entering non-translatable directories
Make prim_file skip invalid filenames in unicode mode
prim_file: Refactor functions that return filenames
prim_file: Refactor handling of responses
prim_file: Always open non-file ports in binary mode
Test that list_dir("non-existing-dir") fails with the correct error
|
|
* anders/diameter/message_length/OTP-10687:
Add length suite for testing Message Length errors
Fix test/depend.mk blunder
Add transport_opt() length_errors
Only start a fragment timer when there's something to flush
Simplify and document diameter_tcp fragment timer
Comment fix
Remove upgrade code not needed after application restart
|
|
* anders/diameter/rfc6733_dictionaries/OTP-10760:
Remove trailing whitespace
Tweak service interface towards diameter_peer
Split message handling in diameter_service into diameter_traffic
Simplify request record
Move failover out of service process
Update traffic suite to test both RFC 3588 and 6733 dictionaries
Update capx suite to test both RFC 3588 and 6733 dictionaries
Add exprecs '#new-'/1 clause taking list argument
Add exprecs '#get-'/1 for transforming records into lists
Document the existence of the RFC 6733 dictionaries
Don't hardcode common dictionary
Add RFC 6733 dictionaries
|
|
* anders/diameter/reopen/OTP-10692:
Fix testcases in event suite
Fix faulty watchdog transition INITIAL -> DOWN
Fix faulty watchdog transition DOWN -> INITIAL
Comment fixes
Rename records peer/conn -> watchdog/peer in diameter_service
Add testcases to traffic suite
Simplify watchdog transitions in service process
Simplify transport shutdown
Remove upgrade code not needed after application restart
Tweak (make) silent rules support
|
|
* vd/jinterface_windows_cookie/OTP-10821:
jinterface: fix finding cookie file on windows
|
|
|
|
Beam path in dependency was wrong.
|
|
The value determines whether or not an unexpected message length in the
header of an incoming messages causes the peer process to exit, the
message to be discarded or handled as usual. The latter may only be
appropriate for message-oriented transport (eg. SCTP) since
stream-oriented transport (eg. TCP) may not be able to recover the
message boundary once a length error has occurred.
|
|
|
|
* vd/tuple_constructor_bug/OTP-10819:
fix bug in OtpErlangTuple constructor
|
|
Binaries were pretty printed too often.
|
|
|
|
|
|
* bjorn/remove-tuple-funs/OTP-10170:
erl_eval: Don't allow evaluation of {M,F} in the shell
|
|
* bjorn/compiler/beam_utils-crash/OTP-10825:
Fix unsafe optimization of funs
|
|
|
|
* vd/code_get_mode/OTP-10823:
Added name prefix to code.xml
Add a new function code:get_mode() can be used to detect how the code servers behaves
|
|
|
|
* hb/stdlib/erl_scan_unicode/OTP-10756:
[stdlib] Remove the undocumented 'unicode' option from the scanner
|
|
|
|
Don't start a new timer with each incoming message. Instead, start a
timer at timeout and flush after two successive timeouts with no message
reception.
|
|
Tuples funs were removed in de7e01c958ff7c9e6da4034a53567a30a4ae5792,
but it was still possible to evaluate tuple funs in the shell.
|
|
|
|
|
|
Which will be the case in R16B.
|
|
Commits 53bd4974a101 and 726f6e4c7afe simplified the handling of
match_fail (used to generated exceptions such as 'function_clause')
by first rewriting them to a call to erlang/error{1,2} and later
rewriting them to specialized BEAM instructions (to reduce the
code size).
There was one flaw, though, which only was exposed when more
aggressive optimizations were added in c3b60f86c622. Here is an
example to explain it:
t(V) ->
fun(get) -> V end.
The following BEAM code will be initially generated for the fun:
{function, '-t/1-fun-0-', 2, 5}.
{label,1}.
{line,[{location,"t.erl",5}]}.
{func_info,{atom,t},{atom,'-t/1-fun-0-'},2}.
{label,2}.
{test,is_eq_exact,{f,2},[{x,0},{atom,get}]}.
{move,{x,1},{x,0}}.
return.
{label,2}.
{test_heap,2,1}.
{put_list,{x,0},nil,{x,1}}.
{move,{atom,function_clause},{x,0}}.
{line,[{location,"t.erl",5}]}.
{call_ext_only,2,{extfunc,erlang,error,2}}.
Translating back to Erlang code, that would be roughly:
'-t/1-fun-0-'(get, V) -> V;
'-t/1-fun-0-'(Arg1, _) -> erlang:error(function_clause, [Arg1]).
Note that the second argument (the free variable V) is not included
in the call to erlang:error/2.
The beam_except pass will simplify the code to:
{function, '-t/1-fun-0-', 2, 8}.
{label,1}.
{line,[{location,"t.erl",5}]}.
{func_info,{atom,t},{atom,'-t/1-fun-0-'},2}.
{label,2}.
{test,is_eq_exact,{f,1},[{x,0},{atom,get}]}.
{move,{x,1},{x,0}}.
return.
The code has been shortened by jumping to the func_info/3 instruction.
Translating back to Erlang:
'-t/1-fun-0-'(get, V) -> V;
'-t/1-fun-0-'(Arg1, Arg2) -> erlang:error(function_clause, [Arg1,Arg2]).
it is clear that both arguments are now included in the
'function_clause' exception, even though the initially generated
code only included the first argument.
That is no problem in this particular case, but for some more complex
funs, optimizing the first version based on variable usage could make
the second version unsafe.
I rejected the following potential solutions:
- Including the free arguments in the call to erlang:error/2:
'-t/1-fun-0-'(get, V) -> V;
'-t/1-fun-0-'(Arg1, Arg2) -> erlang:error(function_clause, [Arg1,Arg2]).
Unfortunately, that is tricky. The free variables are only known
after the second pass in v3_kernel when variable usage has been
calculated. We would need to add a third pass (only for funs) that
would the free arguments to the second argument for erlang:error/2
*and* update the variable usage information.
- Calling beam_except earlier, from within beam_block before any
optimizations based on variable usages are done. But means that the
problem could reappear in some other form in the future when other
updates are done to the code generator and/or optimization passes.
The solution I have chosen is to modify beam_except to only replace
a call to erlang:error(function_class, Args) if the length of Args
is the same as the arity in the func_info/3 instruction. The code
will be slightly larger. Also, the free variables for funs and list
comprehensions will no longer be included in the function_clause
exception (that could be less confusing, but it also means less
information during debugging).
|
|
* anders/diameter/cover/OTP-10804:
Update diameter.cover
|
|
|
|
|
|
Traffic handling is connected to the service implementation through the
pick_peer callback and failover but diameter_service was getting
unwieldy as home to both the service process and traffic handling.
|
|
In particular, remove fields containing values that are known (as of the
preceding commit) to the request process.
|
|
In order to be able to remove fields from the request process that don't
need to be there and do less in the service process. The pick_peer
callback now takes place in the request process in the case of immutable
state, just as in the case of the initial send.
|
|
|
|
|
|
As an inverse to '#get-'/1 in the preceding commit.
|
|
The generated '#get-'/1 has one clause for each exported record r, whose
definition is equivalent to the following.
'#get-'(#r{} = Rec) ->
[r | lists:zip(record_info(r, fields), tl(tuple_to_list(Rec)))];
The record name at the head of the list is the same format that diameter
accepts for outgoing message.
|
|
|
|
Instead, use whatever dictionary a transport has configured as
supporting application id 0. This is to support the updated RFC 6733
dictionaries (which bring with them updated records) and also to be able
to transparently support any changed semantics (eg. 5xxx in
answer-message).
|
|
The RFC 6733 accounting dictionary includes rfc6733 in its name. The RFC
3588 dictionary doesn't and is left as-is for backwards compatibility.
|
|
The transition INITIAL -> DOWN (fixed in the preceding commit) was
wrong.
|
|
There is no such transition in RFC 3539, the state remains in INITIAL.
|
|
* sverk/erl_interface-enum-typedef:
erl_interface: Change enum erlang_char_encoding to a typedef
|
|
* sverk/r16/erl_interface-fixup:
erl_interface: Fix ei_skip_term
|
|
|
