| Age | Commit message (Collapse) | Author |
|---|
|
If it is written with io:fwrite/2 it will be written to
the unexpected_io log, where it will not be of any use.
|
|
When writing messages to stdout, all messages are prefixed with
"Testing" followed by the name of the test suite. We don't want
to write that prefix if testing has stopped.
|
|
|
|
'user_timetrap_error' was not detected during any "conf init function"
except init_per_suite, so if e.g. init_per_group failed with
user_timetrap_error, then the test cases in the group would not be
skipped. This has been corrected.
|
|
Earlier, #st.config was set to undefined when entering this loop. Then
it was updated when the test case itself started. This means that if
the test case process crashed during test case initiation, the parent
process would not know the Config.
This commit saves the initial Config value in the parent process
(run_test_case_msgloop/1) from the start.
|
|
Commit c4375a62cfaabfd8de757f59714623ba1a8cb915 added a parallel
group, but incorrectly, so no test cases at all were run in
receive_SUITE.
|
|
|
|
* fredrik/ssh-use-options-alg/OTP-10498:
Option to ssh:connect {pref_public_key_algs, list()} where you can give the algorithms you want to use
|
|
|
|
* anders/diameter/service_info/OTP-10460:
Don't call service process for service_info
|
|
* anders/diameter/failover_error/OTP-10461:
Add missing clause for peer failover
|
|
* anders/diameter/event_timing/OTP-10459:
Send up event *after* inserting peer in table
|
|
* anders/diameter/watchdog_timeout/OTP-10444:
Exit peer_fsm with {shutdown, watchdog_timeout}, not shutdown
|
|
* anders/diameter/packet_callback/OTP-10441:
Use packet callbacks in traffic suite
Improve other diameter_app doc
Document eval_packet
Add eval_packet for examining outgoing messages after encode
|
|
* anders/diameter/capabilities_errors/OTP-10440:
Fix matching in case of erroneous capabilities config
Fix handling of Origin-State-Id config
|
|
* maint:
Skip ct_netconf tests if there is no crypto
Migrate timers from test_server to ct interface
Update tests to run with an oldshell emulator
Move crypto check so that tc is skipped and not failed
Update for new version of ppc compilation chain
Verify that ebin folder of applications exists
Conflicts:
lib/asn1/test/asn1_SUITE.erl
lib/kernel/test/interactive_shell_SUITE.erl
|
|
* lukas/rcs-ppc-cross-tests/OTP-10265:
Skip ct_netconf tests if there is no crypto
Migrate timers from test_server to ct interface
Update tests to run with an oldshell emulator
Move crypto check so that tc is skipped and not failed
Update for new version of ppc compilation chain
Verify that ebin folder of applications exists
|
|
algorithms you want to use
|
|
* raimo/IPV6_V6ONLY/OTP-8928:
kernel: Correct documentation typos discovered by Tuncer Ayaz
|
|
|
|
* siri/cover-tests: (21 commits)
[common_test] Extend timer for flushing error logger
[cover] Allow reconnection if node has been disconnected or down
[cover] Don't kill remote nodes when connection to main node is lost
[test_server] Add option {start_cover,false} to test_server:start_node
Use code:lib_dir instead of code:which to get application directory
[common_test] Add test for OTP-9956
Include all kernel modules in code coverage analysis
[common_test] Add test suite for code coverage support
[common_test, test_server] Don't flush cover if cover is not running
[common_test] Add option cover_stop
[test_server] Allow cross cover analysis when testing through common_test
[test_server] Start cover in test_server:wait_for_node
[test_server] Multiply timers with timetrap_scale_factor when starting nodes
Include all stdlib modules in code coverage analysis
[test_server] Include all test_server modules in code coverage analysis
Skip epp_SUITE:otp_8911 if cover is running
[common_test] Start cover on slave nodes if running cover tests
[common_test] Don't stop cover before stopping slave node
[test_server] Don't stop cover after test is finished
[cover] Add support for test_server
...
OTP-10427
|
|
* bjorn/ct/stability/OTP-10480:
Simplify managment of test_server_loc
Keep the information about the current test case consistent
test_server: Eliminate the Loc argument for do_end_tc_call()
Refactor the handling of the make_priv_dir message
test_server: Refactor run_test_case_msgloop()
|
|
Because of a forgotten "Fd", configuration information intended for
ct_master_log.html ended up being written to standard output.
|
|
* raimo/IPV6_V6ONLY/OTP-8928:
kernel: Document socket option ipv6_v6only
kernel: Add test cases for socket option ipv6_v6only
erts,kernel: Implement socket option ipv6_v6only in erlang code
erts: Implement socket option IPV6_V6ONLY
erts: Add configure test for IPV6_V6ONLY
|
|
|
|
|
|
|
|
* dgud/stdlib/proc_lib_hangs/OTP-9803:
stdlib: Monitor proc_lib:start'ed processes to avoid waiting forever
|
|
Monitor the spawned process in proc_lib:start/[3|4|5], so
that a proper error is returned, if the spawned process crashes
before proclib:init_ack/1 is sent.
Previously the calling process would hang forever or until specified
timeout. Start link catches these errors but start did not.
start now behaves as start_link if process traps exit.
|
|
Use ct:timetrap/1 instead of test_server:timetrap/1 for really long
test_cases.
Commontest sets up a default timetrap on 30 min, which is not cancelled
if testserver:timetrap called.
|
|
|
|
|
|
|
|
OTP-10040
If a busy test case generated lots of error messages,
cth_log_redirect:post_end_per_testcase would crash with a timeout
while waiting for the error logger to finish handling all error
messages. The default timer is 5 seconds. This has now been extended
to 5 minutes.
|
|
OTP-10523
Earlier, if the connection to a remote cover node was lost, all cover
data was lost and the cover_server on the remote node would die. This
would cause problems if there were cover compiled modules that would
still be executed since they would attempt to write to the no longer
existing ets tables belonging to the cover_server.
This commit changes this behavior so that the cover_server on the
remote node will survive connection loss and continue collecting cover
data. If the connection is re-established then the main node will sync
with the remote node again and cover data will not be lost (unless the
node was down).
|
|
OTP-10523
Since the will probably be cover compiled modules left in the remote
node, we want to keep the cover_server and it's ets tables even if
connection to remote node is lost. This way it will not crash (due to
ets:insert in non existing table) if functions in cover compiled
modules are executed.
|
|
By default the test server will start cover on all nodes when the test
is run with code coverage analysis. To make sure cover is not started
on a new node, this option can be set.
This can be useful if the test itself starts cover or if the new node
for some reason can not run cover compiled code.
|
|
code_SUITE:ext_mod_dep used code:which(kernel) to get the path to the
kernel ebin directory. This failed when kernel was cover compiled,
since code:which then returns 'cover_compiled'. Using code:lib_dir
instead solved the problem.
|
|
OTP-9956
Test that the test suite itself can be cover compiled, and that
data_dir is still set correctly.
|
|
|
|
|
|
ct_slave, ct_test_support and test_server_test_lib always called
cover:flush/1 when stopping slave nodes. If cover was not running,
this would cause cover_server to be started and thus
test_server:is_cover/0 to return true afterwards. This has been
corrected.
|
|
By default, test_server will always stop cover (and thus load back the
non cover compiled original beam files) after a test with code
coverage analysis is completed. The new option allows the common_test
user to specify that cover shall not be stopped. This can be useful if
there are processes still running old code, i.e. processes that have
not done any fully qualified function call after the cover
compilation, since loading the original code then will kill those
processes. This is only recommended if the erlang node is to be
stopped after the test run, or if cover can be manually stopped.
|
|
The cross cover analysis functionality in test_server was broken since
OTP converted to running daily tests through common_test. This has
been corrected.
|
|
Without this change, there is no support in test_server for starting
cover on a node started with option {wait,false}.
|
|
In test_server_ctrl:start_node and wait_for_node, the timer in
controller_call was not multiplied by the timetrap_scale_factor. This
caused unexpected behaviour since the scale factor was used furhter
down the the code, and timeout would happen in unexpected order when
cover was running.
|
|
|
|
|
|
This is because this test case itself starts and stops cover.
|
|
Nodes started with ct_slave should automatically run cover when tests
are executed with cover analysis. Nodes must also be flushed for cover
data before stopped.
|
