| Age | Commit message (Collapse) | Author |
|---|
|
Adding a second {Vendor-Id} to the common CER definition results in
this error:
** AVP CER at line 85 already referenced at line 84
That is, the error incorrectly refers to the message name (CER) where the
AVP name (Vendor-Id) is expected.
|
|
By just decoding to map in the client, instead of to record first. The
record decode is exercised enough in the server and in other suites.
|
|
diameter_codec(3) referred only to the record format in places. The
configurable format was added in commits 722fa415 and then 55e65b26.
|
|
Which reads better and makes it easier to distinguish this false from
others.
|
|
Represent the decoded message by its atom-valued name in
diameter_packet.msg, which makes trace much more readable. A
diameter_avp.value is untouched (ie. undefined): the AVP name is already
in the name field.
|
|
Which dialyzer hasn't noticed.
|
|
anders/diameter/decode_format/OTP-14511
* anders/diameter/config_consistency/OTP-14555:
Fix strict_arities blunder
Fix minor error-handling blunder
Let strict_mbit and incoming_maxlen be configured per transport
Let a service configure default transport options
Rename type evaluable -> eval
Document transport_opt() strict_capx
Rename transport_opt() capx_strictness to strict_capx
|
|
Remove value from the merged map, not from the maps being merged.
Bundled in commit 5f3becad.
|
|
Leading to this admonition from dialyzer:
diameter_config.erl:670: The variable No can never match since previous
clauses completely covered the type 'ok'
The throw was caught, but resulted in an error return without the
intended information.
|
|
RFC 6733 says this:
6.2. Diameter Answer Processing
When a request is locally processed, the following procedures MUST be
applied to create the associated answer, in addition to any
additional procedures that MAY be discussed in the Diameter
application defining the command:
...
o Any Proxy-Info AVPs in the request MUST be added to the answer
message, in the same order they were present in the request.
This wasn't done when a handle_request callback returned a Result-Code
in an 'answer-message' or protocol_error tuple, causing diameter itself
to construct the answer message. This form of answer is just a
convenience, since the callback can always return an answer that it
constructs itself.
|
|
The introduction of decode_format in commit 722fa415 (and then 55e65b26)
meant the value was not necessarily the intended tuple.
|
|
It's no longer the AVP name as of the parent commit, but the name of
the field/member the value will be stored in. Typically the AVP name,
but possibly 'AVP'.
|
|
That is, when the arity of an 'AVP' field has an upper bound. This
shouldn't happen in practice, but if an AVP is known but its name not
explicit in the message grammar then its count was confused with that
of AVPs packed into the 'AVP' field.
|
|
Commit 96cd627a changed the way the index field was used, but the
enumeration is used in at least one known application (as a pointer from
elements of diameter_packet.errors to elements of diameter_packet.avps)
and the motivation for the change is questionable: the lookup that was
avoided was unnecessary given that it was already performed in
incrementing a counter. Revert to enumerating as before in the non-relay
case, but not in the relay case since there's no corresponding usecase.
|
|
Decoded CER/CEA messages are passed in events messages that can be
subscribed to using diameter:subscribe/1. A configured decode_format was
not reflected in these, messages always being passed as records.
Clarify that strict_arities only applies to message callbacks.
|
|
Since these can make sense per peer. The remaining service-only options
either belong there or make little sense being configured per transport.
|
|
Only a default spawn_opt has been possible to configure, but there's
no reason why most others should need to be configured per transport.
Those options that still only make sense on a transport are
transport_module/config (because of the semantics of multiple values),
applications/capabilities (since these override service options), and
private (since it's only to allow user-specific options in a backwards
compatible way).
|
|
Export the old type as a synonym for backwards compatability. The name
evaluable is a bit too awkward.
|
|
|
|
To follow the naming of options like strict_mbit and more. Still accept
capx_strictness since this is known to be used.
Introduced in commit e4f28f3b.
|
|
Testcase init functions are getting Config from groups and suites
they're not in. Presumably related to the problems worked around in the
parent commit.
|
|
diameter_traffic_SUITE has four layers of nested groups, so when a
testcase is run it should get Config from four init_per_group plus one
init_per_testcase. This isn't what happens: Config is being accumulated
from several init_per_group in some manner that isn't clear, and the
skip in the parent commit somehow results in growing
test_server_gl:init/1 processes that eventually consume all memory.
Replacing rather than prepending to Config in init_per_group works
around this, but the common_test behaviour seems wrong.
|
|
To limit the number of testcases being run.
|
|
To exercise the new traffic_counters option.
|
|
To be able to disable the counting of messages for which application
callbacks take place. Messages sent/handled by diameter itself are
always counted.
|
|
That dialyzer hasn't noticed is broken.
|
|
Despite what the Efficiency Guide says about match being more efficient,
split_binary appears to be slightly faster. (Although this one
extraction is a drop in the bucket.) Binary optimizations aren't an
issue during decode.
|
|
Since messages are accumulated by appending binaries as of three
commits back, the accumulated binary is prone to being copied, as
discussed in the Efficiency Guide. Matching the Message Length header
as bytes are being accumulated is one cause of this, so work around it
by splitting the binary and extracting the length without a match.
This doesn't feel like something that should be necessary: that matching
a binary would cause an append to copy isn't obvious. The first attempt
at simplifying the accumulation was simply to append an incoming binary
to the current fragment, match against <<_, Len:24, _/binary>> to
extract the length, and then test if there are enough bytes for a
message. This lead to horrible performance (response times for 2 MB
messages approximately 100 times worse than previously), and it wasn't
at all obvious that the reason was the accumulated binary being copied
with each append as a result of the match. Using split_binary avoids the
match context that forces the copying.
|
|
Not with each setopts to re-activate the socket.
|
|
Only reset the fragment after all messages have been extracted.
|
|
Appending to a binary is efficient, so just append message fragments
Only match out the length once per message since doing so for every
packet from TCP causes the binary to be copied.
|
|
Create less garbage.
|
|
|
|
Which has had no negative effect.
|
|
That dialyzer hasn't noticed is broken.
|
|
Also inline incr/8 and associated functions that were needed for the
compiler to accept the optimization, since this does make for a
measuable improvement.
|
|
With ERL_COMPILER_OPTIONS=bin_opt_info, before:
base/diameter_codec.erl:508: Warning: NOT OPTIMIZED: the binary matching instruction that follows in the same function have problems that prevent delayed sub binary optimization (probably indicated by INFO warnings)
And after:
base/diameter_codec.erl:508: Warning: OPTIMIZED: creation of sub binary delayed
This has a surprisingly large impact on the performance of
diameter_codec:collect_avps/2: about 15% faster in one testcase on a RAR
with 7 AVPs.
|
|
The index field in record diameter_avp was previously used to enumerate
AVPs so that the list could be returned in some cases, since
diameter_codec:collect_avps/2 (now /1) reversed the order. That's no
longer the case as of the grandparent commit, so use the field to
enumerate instances of the same AVP instead, and only when arities are
being checked, to save having to look them up in the map when checking
for 5009 errors, or counting AVPs at all in diameter_codec:collect_avps/1.
|
|
Extract strict_arities once and pass it through as an argument.
|
|
Decode has previously been two passes: first chunk the message into a
reversed list of toplevel diameter_avp records, then fold through the
reversed list to build the full result. Various workarounds have made it
a bit more convoluted than it should be however. Rework it completely,
turning the previous 2-pass tail-recursive implementation into a 1-pass
body recursive one.
The relay decode still exists in diameter_codec, as a stripped down
version of the full decode in diameter_gen.
|
|
|
|
|
|
To be able to disable the relatively expensive check that the number of
AVPs received in a message or grouped AVP agrees with the dictionary in
question. The may well be easier for the user in handle_request/answer
callbacks, when digesting the received message, and in some cases may
not be important.
The check at encode can also be disabled, allowing messages that don't
agree with the dictionary in question to be sent, which can be useful in
test (at least).
|
|
As noted in the parent commit, the wrong AVPs were reported, being
counted from the back of the message instead of the front. Both 5005 and
5009 errors are now detected after the message is decoded.
|
|
Aka DIAMETER_AVP_OCCURS_TOO_MANY_TIMES.
This reveals a fault. The RFC says this:
A message was received that included an AVP that appeared more
often than permitted in the message definition. The Failed-AVP
AVP MUST be included and contain a copy of the first instance of
the offending AVP that exceeded the maximum number of occurrences.
The list of AVPs is reversed when diameter checks arities, so Failed-AVP
contains the wrong AVP, causing the new testcase to fail.
|
|
Stop counting when there can be no arity errors.
|
|
|
|
Since the number is now under 50K again. Also make testing of individual
groups or testcases easier.
|
|
Count as AVPs are encoded instead.
|
|
Use the same [MsgName | Avps] representation as for the list decode, but
with Avps a map instead of a AVP name/values list. As a result, don't
set the message/AVP name on an additional key in the map, which felt a
bit odd. Messages are [MsgName :: atom() | map()], Grouped AVPs are just
map().
Fix at least one problem in the traffic suite along the way: with
decode_format false, the own decode in to_map/2 didn't know whether or
not to decode strings, resulting on some failures.
|
