| Age | Commit message (Collapse) | Author |
|---|
|
Prior to this commit, the fact that parameters of opaque types are
expanded differently depending on the current values of limits used
during expansion, caused problems later when the types of parameters
are used for determining if opaque types are comparable.
|
|
* sverk/crypto-ec_curves/OTP-12944:
crypto: Make ec_curves/0 return empty list if not supported
|
|
|
|
Instruction get_map_elements might destroy target registers when the fail-label is taken.
Only seen for patterns with two, and only two, target registers.
Specifically: we copy one register, and then jump.
foo(A,#{a := V1, b := V2}) -> ...
foo(A,#{b := V}) -> ...
call foo(value, #{a=>whops, c=>42}).
corresponding assembler:
{test,is_map,{f,5},[{x,1}]}.
{get_map_elements,{f,7},{x,1},{list,[{atom,a},{x,1},{atom,b},{x,2}]}}.
%% if 'a' exists but not 'b' {x,1} is overwritten, jump {f,7}
{move,{integer,1},{x,0}}.
{call_only,3,{f,10}}.
{label,7}.
{get_map_elements,{f,8},{x,1},{list,[{atom,b},{x,2}]}}.
%% {x,1} (src) is read with a corrupt value
{move,{x,0},{x,1}}.
{move,{integer,2},{x,0}}.
{call_only,3,{f,10}}.
The fix is to remove 'opt_moves' pass for get_map_elements instruction
in the case of two or more destinations.
Reported-by: Valery Tikhonov
|
|
|
|
|
|
Fix the range type of erlang:abs/1.
|
|
* sverk/hipe-fix-literal-crc:
erts,hipe,dialyzer: Fix hipe checkum of target runtime system
erts: Change THE_NON_VALUE to not be hard coded in hipe compiler
OTP-12962
OTP-12963
OTP-12964
|
|
Main problem:
A faulty HIPE_LITERAL_CRC was not detected by the loader.
Strangeness #1:
Dialyzer should ask the hipe compiler about the target checksum,
not an internal bif.
Strangeness #2:
The HIPE_SYSTEM_CRC checksum was based on the HIPE_LITERALS_CRC
checksum.
Solution:
New HIPE_ERTS_CHECKSUM which is an bxor of the two (now independent)
HIPE_LITERALS_CRC and HIPE_SYSTEM_CRC.
HIPE_LITERALS_CRC represents values that are assumed to stay constant
for different VM configurations of the same arch, and are therefor
hard coded into the hipe compiler.
HIPE_SYSTEM_CRC represents values that may differ between VM variants.
By default the hipe compiler asks the running VM for this checksum,
in order to create beam files for the same running VM.
The hipe compiler can be configured (with "make XCOMP=yes ...") to
create beam files for another VM variant, in which case HIPE_SYSTEM_CRC
is also hard coded.
ToDo:
Treat all erts properties the same. Either ask the running VM or hard
coded into hipe (if XCOMP=yes). This will simplify and reduce the risk
of dangerous mismatches. One concern might be the added overhead
from more frequent calls to hipe_bifs:get_rts_param.
|
|
|
|
Add ssh_trpt_test_lib:instantiate/2, ssh_test_lib:default_algoritms/2 and algo_intersection/2
ssh_to_openssh_SUITE uses only algos that sshd and ssh client supports
raised timeout limit in ssh_basic_SUITE:ssh_connect_arg4_timeout
Break out ssh_renegotiate_SUITE from ssh_basic_SUITE
Move std_daemon/4 to ssh_test_lib.erl
Add ssh_algorithms_SUITE
Add ssh_options_SUITE
Add assymetric testing of algorithms
Add openssh tests to ssh_algorithms_SUITE
Remove algo tests from ssh_sftp_SUITE (now in ssh_algorithms_SUITE)
Removed kex algo tests from in ssh_basic_SUITE because they are now in ssh_algorithm_SUITE.
fixed test case ssh_protocol_SUITE:no_common_alg_server_disconnects/1
|
|
* hans/ssh/kex_ecdh/OTP-12622:
ssh: Elliptic Curve Diffie-Hellman (ECDH)
|
|
Adds ecdh-sha2-nistp256
ecdh-sha2-nistp384
ecdh-sha2-nistp512
and OTP-12938
hmac-sha2-512
|
|
|
|
* dgud/stdlib/zip-optimize/OTP-12950:
Optimize zip:unzip/2 when uncompressing to memory
|
|
* dgud/debugger/fix-case-clause/OTP-12911:
debugger: Fix broken debugger:quick/3 start
|
|
* dgud/wx/fix-test:
wx: Fix assert log test
|
|
* dgud/mnesia/use_now_in_tests:
Remove erlang:now() and random usage in tests
|
|
A new experimental option 'max_random_length_padding', not documented so it might change...
|
|
* hans/ssh/deps_in_src_Makefile:
ssh: dependencies added in ssh/src/Makefile
|
|
* hans/ssh/prolong_short_timetrap:
ssh: doubled short timetrap in testcase
|
|
* eksperimental/patch-1:
Improve success message when 2 tests have passed
OTP-12952
|
|
|
|
Opaque recursive parameters are expanded faster.
|
|
Expand parameters when needed only.
The opaqueness is removed from types expanded to any().
|
|
|
|
Add more information about the caller of t_from_form(). Instead of
just the module, also provide name of the type, spec, or record where
the type form resides.
|
|
|
|
Instead ask running VM for the value of THE_NON_VALUE,
which is different between opt and debug VM.
Same hipe compiler can now compile for both opt and debug VM.
|
|
|
|
Optimize the case where we are appending to the end of the binary, use
binary syntax to create binaries with room for expansion in the next
loop, instead of using iolist_to_binary which creates a binary of the
exact size and needs to be copied in each loop.
Also remove support the unused Acc as iolists.
|
|
Thanks to ILYA Khlopotov for pointing the bug out.
|
|
As pointed out by roowe, qlc does not handle errors in early compiler
(scanner, parser) well in OTP 18.0.
|
|
|
|
|
|
* ia/ssl/doc/duplicate:
ssl: Remove duplicate documentation
|
|
Correct merge that went wrong.
|
|
The example is provided by James Fish in
http://erlang.org/pipermail/erlang-questions/2014-December/082204.html.
Note that warnings with text such as "the _ variable breaks
opaqueness" are still possible.
|
|
Several users on erlang-questions have reported problems with recent
releases where output to standard_error causes standard_error_sup to
die from receiving an unexpected eagain error. In the fd_driver,
change the fd_async() function to handle EINTR, and change
fd_ready_async() to handle ERRNO_BLOCK. Add a new test to
standard_error_SUITE to generate output to standard_error and ensure
that standard_error_sup does not die. Thanks to Kota Uenishi for
contributing the test case.
|
|
|
|
* hans/ssh/cuddle_tests:
ssh: ct:pal -> ct:log in lib/ssh/test
ssh: ssh_trpt_test_lib improvments
ssh: Unicode test improvments
|
|
Did not work on windows, on windows getItem uses wxLogWindow instead
of assert in case of out of range, so the test still caused a log window.
|
|
Too much code was removed in commit 560f73141af
|
|
Broken in the parent commit.
|
|
The diffs are all about adapting to the OTP 18 time interface. The code
was previously backwards compatible, falling back on the erlang:now/0 if
erlang:monotonic_time/0 is unavailable, but this was seen to be a bad
thing in commit 9c0f2f2c. Use of erlang:now/0 is now removed.
|
|
OTP-12935
* sstrigler/fix-port-timeout:
add test for odbc port_timeout
add doc for odbc port_timeout
introduce odbc port_timeout
|
|
|
|
* anders/diameter/17.5.6.3/OTP-12927:
vsn -> 1.9.2.1
Update appup for 17.5.6.3
|
|
* anders/diameter/17/time/OTP-12926:
Simplify time manipulation
Remove use of monotonic time in pre-18 code
Remove unnecessary redefinition of erlang:max/2
|
|
* anders/diameter/grouped_errors/OTP-12930:
Fix decode of Grouped AVPs containing errors
Simplify logic
Simplify logic
|
