| Age | Commit message (Collapse) | Author |
|---|
|
Conflicts:
lib/observer/src/crashdump_viewer.erl
|
|
* siri/cdv/many-links/OTP-14725:
[observer] Improve performance for many links or monitors
|
|
OTP:13713: Add documentation and typespecs for inet:i/0
|
|
Run beam_block a second time
|
|
Clean up and improve sys_core_fold optimizations
|
|
Refactor '%live' and '%def' annotations
|
|
|
|
|
|
Running beam_block again after the other optimizations have run will
give it more opportunities for optimizations. In particular, more
allocate_zero/2 instructions can be turned into allocate/2
instructions, and more get_tuple_element/3 instructions can store the
retrieved value into the correct register at once.
Out of a sample of about 700 modules in OTP, 64 modules were improved
by this commit.
|
|
If possible, when adding move/2 instructions, try to insert
them into a block. That could potentially allow them to
be optimized.
|
|
beam_utils:live_opt/1 is currently only run early (from
beam_block). Prepare it to be run after beam_split when
instructions with failure labels have been taken out of
blocks.
While we are it, also improve check_liveness/3. That will
improve the optimizations in beam_record (replacing tuple
matching instructions with an is_tagged_tuple instruction).
|
|
Since the select_val instruction never transfer directly to the next
instruction, the incoming live registers should be ignored. This
bug have not caused any problems yet, but it will in the future
if we are to run the liveness optimizations again after
the optimizations in beam_dead and beam_jump.
|
|
In a guard, reorder two consecutive calls to the element/2 BIF that
access the same tuple and have the same failure label so that highest
index is fetched first. That will allow the second element/2 to be
replace with the slightly cheaper get_tuple_element/3 instruction.
|
|
Consider a 'case' that exports variables and whose return
value is ignored:
foo(N) ->
case N of
1 ->
Res = one;
2 ->
Res = two
end,
{ok,Res}.
That code will be translated to the following Core Erlang code:
'foo'/1 =
fun (_@c0) ->
let <_@c5,Res> =
case _@c0 of
<1> when 'true' ->
<'one','one'>
<2> when 'true' ->
<'two','two'>
<_@c3> when 'true' ->
primop 'match_fail'({'case_clause',_@c3})
end
in
{'ok',Res}
The exported variables has been rewritten to explicit return
values. Note that the original return value from the 'case' is bound to
the variable _@c5, which is unused.
The corresponding BEAM assembly code looks like this:
{function, foo, 1, 2}.
{label,1}.
{line,[...]}.
{func_info,{atom,t},{atom,foo},1}.
{label,2}.
{test,is_integer,{f,6},[{x,0}]}.
{select_val,{x,0},{f,6},{list,[{integer,2},{f,3},{integer,1},{f,4}]}}.
{label,3}.
{move,{atom,two},{x,1}}.
{move,{atom,two},{x,0}}.
{jump,{f,5}}.
{label,4}.
{move,{atom,one},{x,1}}.
{move,{atom,one},{x,0}}.
{label,5}.
{test_heap,3,2}.
{put_tuple,2,{x,0}}.
{put,{atom,ok}}.
{put,{x,1}}.
return.
{label,6}.
{line,[...]}.
{case_end,{x,0}}.
Because of the test_heap instruction following label 5, the assignment
to {x,0} cannot be optimized away by the passes that optimize BEAM assembly
code.
Refactor the optimizations of 'let' in sys_core_fold to eliminate the
unused variable. Thus:
'foo'/1 =
fun (_@c0) ->
let <Res> =
case _@c0 of
<1> when 'true' ->
'one'
<2> when 'true' ->
'two'
<_@c3> when 'true' ->
primop 'match_fail'({'case_clause',_@c3})
end
in
{'ok',Res}
The resulting BEAM code will look like:
{function, foo, 1, 2}.
{label,1}.
{line,[...]}.
{func_info,{atom,t},{atom,foo},1}.
{label,2}.
{test,is_integer,{f,6},[{x,0}]}.
{select_val,{x,0},{f,6},{list,[{integer,2},{f,3},{integer,1},{f,4}]}}.
{label,3}.
{move,{atom,two},{x,0}}.
{jump,{f,5}}.
{label,4}.
{move,{atom,one},{x,0}}.
{label,5}.
{test_heap,3,1}.
{put_tuple,2,{x,1}}.
{put,{atom,ok}}.
{put,{x,0}}.
{move,{x,1},{x,0}}.
return.
{label,6}.
{line,[...]}.
{case_end,{x,0}}.
|
|
Improve handling of #c_seq{}, making sure to simplify a #c_seq{}
as much as possible. With that improvement, we can remove some
special-case code from opt_simple_let_2/6.
|
|
|
|
|
|
The annotations in the optimizing passes currently looks like this:
{'%live',NumRegistersUsed,RegistersUsedBitmap}
{'%def',RegistersDefinedBitmap}
(NumRegistersUsed is no longer used.)
When I attempted to extend some optimizations, I found that I had to
add additional clauses to tolerate/handle both types of
annotations. That problem would only get worse if any more annotations
are added in the future.
To simplify annotation handling, this commit wraps both types of
annotations in a {'%anno',_} tuple:
{'%anno',{used,RegistersUsedBitmap}}
{'%anno',{def,RegistersDefinedBitmap}}
The '%live' annotation has been renamed to 'used' to make it somewhat
clearer what it means, and the unused NumRegistersUsed part of the
old annotation has been removed.
Alternatives considered: My first attempt was to wrap the annotation
in a 'set' tuple so that there would only be 'set' tuples in a block.
For example:
{set,[],[],{anno,{live,RegistersUsedBitmap}}}
It was not as convenient as expected. Annotations often need to be
handled specially from other instructions in a block. When they are
wrapped in a 'set' tuple, they can very easily be handled incorrectly
or passed on to the next pass. That causes subtle errors or worse
code, and it can be difficult to debug.
Therefore, my conclusion is that annotations should be distinct from
other instructions, to make it obvious when one have missed to handle
an annotation.
|
|
|
|
* ingela/ssl/timeout-cuddle:
ssl: Tune timeouts
|
|
|
|
jhogberg/john/compiler/reintroduce-tuple-arity-optimizations/OTP-14857
Reintroduce the tuple arity optimizations removed in PR #1673
|
|
When a process has many links and/or monitors, it could earlier take
very long time to display the process information window. This is now
improved by only showing a few links and monitors, and then an link
named "more..." to expand the rest.
Reading of the "Link list" from a crashdump is also improved.
|
|
Turn more allocate_zero instructions into allocate instructions.
|
|
An 'allocate' or 'allocate_zero' instruction should not be
shortly followed by a 'test_heap' instruction. For example,
we don't want this type of code:
{allocate_zero,3,4}.
{line,...}.
{test_heap,7,4}.
{bif,element,{f,0},...,...}.
While the code is safe because 'allocate_zero' has initialized the
stack frame, it is wasteful. Also note that the code would become
unsafe if the 'allocate_zero' instruction were to be replaced with
an 'allocate' instruction.
What we want to see is this:
{allocate_heap_zero,3,7,4}.
{line,...}.
{bif,element,{f,0},...,...}.
|
|
In 21dd6e55877832, beam_utils:combine_heap_needs/2 stopped
wrapping an allocation list in an {alloc,...} tuple. That was
not noticed because the faulty heap need created in beam_block
was discarded by beam_type.
|
|
beam_utils:is_killed/3 could incorrectly indicate that a
register was killed, when in fact it was referenced by
an instruction that did a GC.
|
|
* maint:
beam_validator: Strengthen validation of GC instructions
|
|
beam_validator: Strengthen validation of GC instructions
OTP-14863
|
|
* hasse/stdlib/erl_eval_stacktrace/OTP-14826/PR-1540:
syntax_tools: Correct handling of stacktrace variable
stdlib: Add check of stacktrace variable to erl_eval
stdlib: Improve erl_eval's stacktraces
|
|
* maint:
dialyzer: Add a test of erl_tar:table/1,2
Fix false Dialyzer warnings for erl_tar:table/1
|
|
'hasse/stdlib/incomplete_erl_tar_function_spec/OTP-14860/PR-1670' into maint
* hasse/stdlib/incomplete_erl_tar_function_spec/OTP-14860/PR-1670:
dialyzer: Add a test of erl_tar:table/1,2
Fix false Dialyzer warnings for erl_tar:table/1
|
|
* maint:
ssh: A compatibility testing suite using dockers This suite tests compatibility with different combinations of OpenSSH and OpenSSL. The peer SSH is running in a docker container.
|
|
* hans/ssh/docker_compat_tests/OTP-14194:
ssh: A compatibility testing suite using dockers This suite tests compatibility with different combinations of OpenSSH and OpenSSL. The peer SSH is running in a docker container.
|
|
A quick fix to make the test suite work with the updated erl_eval.
[I think that if "A:B:_" is allowed, it should have a representation
in the abstract format, but that's another story. The pretty printer
should not modify the source code, just print it nicely, IMHO. (But
removing parentheses is OK)]
|
|
Some of the functions of the erl_eval module do not call the Erlang
code linter, so they need to explicitly check that the newly
introduced stacktrace variable is not bound.
|
|
The call "erlang:get_stacktrace()" is not handled explicitly. If there
are issues, they can probably be ignored since erlang:get_stacktrace/1
will be deprecated and removed.
|
|
|
|
'tar_entry()' values are only returned if we specify the 'verbose'
option when calling table/2, which table/1 doesn't do.
Now, it appears that Dialyzer as of OTP 20 is clever enough to realize
that the return type of table/1 must intersect with the return type of
table/2, and so it ignores the fact that table/1 says it returns
strings, and therefore its callers are expected to be dealing with
'tar_entry()' tuples, and never with strings.
This is obviously a mismatch between what the code does and what the
spec says is does, leading to false Dialyzer warnings on code that uses
table/1 (and, presumably, also table/2 when called without
the 'verbose' option.)
|
|
|
|
* siri/etop/include/ERL-534/OTP-14842:
[observer] Use include_lib instead of include with relative path
Add runtime_tools/include to tertiary bootstrap
|
|
* maint:
dialyzer: Correct handling of erlang:abs/1
|
|
* hasse/dialyzer/fix_abs/OTP-14858/ERL-551:
dialyzer: Correct handling of erlang:abs/1
|
|
|
|
into maint
* siri/cdv/crash-when-truncated-in-mod-attr/ERL-537/OTP-14846:
[cdv] Don't crash when dump is truncated in module attributes
|
|
|
|
* ingela/dtls/test-cuddle:
dtls: Filter out rc4 for DTLS psk suites
dtls: We do not need to wait for DTLS over UDP server
|
|
We can safely tell when a test_arity or is_record instruction is
superflous by keeping track of whether the size is exactly known
or not.
|
|
See also https://bugs.erlang.org/browse/ERL-551.
|
|
This suite tests compatibility with different combinations of OpenSSH and OpenSSL. The peer SSH is running in a docker container.
|
